Jump to content

Recommended Posts

Check this out Please login or register to see this link.

I have preordered one to try.

 

 

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

  • Like 3

Share this post


Link to post
Share on other sites
31 minutes ago, corona2222 said:

where does it connect to on the xbox board?

It replaces the default AV out.

I pre-ordered one too. Very interested in this, and how the direct digital out will go vs component/custom hdmi adapters.

 

Share this post


Link to post
Share on other sites
6 hours ago, corona2222 said:

where does it connect to on the xbox board?

It's bypassing the  video encoder chip so digital signal to HDMI and not component to HDMI

Fitting is going to need the same level of soldering skills as a ram upgrade.

There is also a different one coming that will replace the ethernet port with a HDMI connector and you can then  have the old AV port as well as the HDMI. 

Please login or register to see this link.    scroll down a bit

But in my view are you ever going to use the analog AV output again for me hell no.

Ee_ffU4WkAImABE.jpg.e1a0187279108d1c9fb03ed99328cba5.jpg

This one has built in WiFi and if it's priced like the others he makes it  will probably be around $130usd.

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

 

 

 

Share this post


Link to post
Share on other sites
17 hours ago, SS_Dave said:

Check this out Please login or register to see this link.

I have preordered one to try.

 

 

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

How does this compare with N64freak's hdmi mod?

Share this post


Link to post
Share on other sites

 

2 hours ago, Nier said:

How does this compare with N64freak's hdmi mod?

I would say better

The N64 HDMI is digitizing a Component (Red, Green, Blue) and sampling the digital audio the Xbox already has.

Where this one is taking the digital video signal that is going to the video chip and the digital audio and converting to HDMI.

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

Share this post


Link to post
Share on other sites
14 hours ago, SS_Dave said:

 

I would say better

The N64 HDMI is digitizing a Component (Red, Green, Blue) and sampling the digital audio the Xbox already has.

Where this one is taking the digital video signal that is going to the video chip and the digital audio and converting to HDMI.

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

I just pre-ordered it too. Can’t wait!

Share this post


Link to post
Share on other sites
On 8/28/2020 at 4:21 AM, SS_Dave said:

It's bypassing the  video encoder chip so digital signal to HDMI and not component to HDMI

Fitting is going to need the same level of soldering skills as a ram upgrade.

 

Amazing work they've done. Right way to produce HDMI signal - lifting after GPU instead of converting post component. I don't have patience for SMT level work but will be interesting watching the install tutorial.

I tried soldering flexi ribbon before and ended up melting all the plastic and nothing stayed stuck to the board 😂 I now have a temperature controlled iron so I would probably have more luck.

Edited by corona2222

Share this post


Link to post
Share on other sites

Very cool! I'm tempted to order one but I've recently bought an OGx360 kit, a debug kit Xbox, and a few other random Xbox auctions so I'll probably wait.

Replacing the ethernet port... it's cool that it's an option, but if you're that interested in keeping both video output options, perhaps you're better off using an HDMI splitter then converting it to component/composite. But hey, to each his own.

  • Like 1

Share this post


Link to post
Share on other sites
42 minutes ago, GoTeamScotch said:

Very cool! I'm tempted to order one but I've recently bought an OGx360 kit, a debug kit Xbox, and a few other random Xbox auctions so I'll probably wait.

Replacing the ethernet port... it's cool that it's an option, but if you're that interested in keeping both video output options, perhaps you're better off using an HDMI splitter then converting it to component/composite. But hey, to each his own.

If you really needed a composite or component signal it would be better to downgrade a HDMI signal.

Most new screens now only have HDMI and if you are lucky it may have 1 composite video so HDMI is going to become the normal mod/addon on all old school gaming consoles.

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Share this post


Link to post
Share on other sites
On 8/27/2020 at 4:05 AM, SS_Dave said:

Check this out Please login or register to see this link.

I have preordered one to try.

 

 

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

i'm really interested to see how that turns out.

Share this post


Link to post
Share on other sites

I wish i had more confidence in my skills, i want to get one and try it out but i dont know if i can actually install it without messing it up lol. I am interested to see the results though.

Share this post


Link to post
Share on other sites

I was order number 1029 and he now has over 2000 orders.

That's a lot of HDMI boards to ship and I am sure that a lot of orders will be for more than one.

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Y-Stylzz
      Hello,

      I have used the official component cable for my original Xbox for years without any issues, until now. This is what happens:
      Please login or register to see this link.

      This only seems to happen on menu's. No problems in-game so far.

      At first, I thought the cable was damaged, so I bought a Kaico HDMI adapter to replace it, but this is what happens when I use it:
      Please login or register to see this link.

      I decided to grab my older Xbox from the attic for testing and both cables work perfectly on that console, so I think the cables are not the issue.

      I'm no expert at all, so can somebody tell me what's going on with my console? Can it be fixed?
    • By fridayshoes
      I have a TSOPED Xbox PAL console and it is running the 2TB Origins image.
      I had previously set the the video mode to NTSC and was using the HD resolutions fine no problem with a HD component cable, only trouble was the cable was not good quality and caused a lot of buzzing sound through my speakers.
      So I bought the Bitfunx HMDI adaptor (think it is similar, if not same as the Pound one).
      Problem I have now is that I can't seem to use it and display in NTSC HD modes at all.
      If I set the console to PAL the Xbox shows the EVOX boot screen and then loads the dashboard fine (obviously only in the lowest res PAL mode)
      If I set the console to NTSC the Xbox shows the EVOX boot screen but then the dashboard won't show as it appears the TV is not receiving a HD signal.
       
      I am stuck, is there anything I can try?
       
      Thanks in advance. 
    • By bulkchart32
      i like to play halo 2 on xlink kai but my vizio 4k tv just makes it not fun. i have adjusted all the settings in the menu to give minimum latency but it's still there. someone pointed out that part of the latency is caused by the fact that the xbox is sending an analog signal to the tv and the tv has to convert it to digital before it can put it to the screen(i know there is inherit input lag in a va panel led tv but that's not what i'm talking about right now). i said all that to ask this question, would one of the hdmi mods for the xbox help solve some of that latency problem by sending a digital signal to the tv? my current setup is using the microsoft hd component adapter and component cables. the tv is a px75-g1. btw, i know it's best to play on a crt but that is difficult right now for several reasons.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.