Search the Community

Just picked up a really clean console from Goodwill with a well installed xecuter 2.6. Unfortunately I can’t get anywhere with it. Stock dash will not load when chip is off. Throws an error 16. I’ve tried locked and unlocked. Neither get passed error screen. With the chip on and in bank 2, it will boot in flashbios 3.0.3, but will not accept a bios in any way. There are two that appear to be saved on the HDD also. Every way I’ve tried so far either fails or says “bios update found… Halting!” And then nothing. Chip protection is off during all of this also

So i have a 1.2-1.3 version Xbox that sometime 10-15 years ago i moded with a Chameleon solder-less chip. I used an Xecuter 2 bios and when it turns on it asks for a password. This was to keep my 7 college roommates from playing it all the time. Fast forward a decade later and I am cleaning it up and refreshing it, and i forgot the password. Any idea how to reset this? Plan is to clean the DVD drive (wont open), clean the case. 2TB Sata Drive, Startech SATA to IDE, OGX360 Internal (if anyone has one available) With that being the case, will I still run into this Xecuter Password assuming its a Bios on the Chip? I do have the original DVD I flashed the chip with. I have been reading a lot about Hexen, XBMC-emustation, and OGXbox Installer. Any insight on what route would be easiest?

Hi, I recently installed a Xecuter X2.6CE modchip into a v1.4 console. Flashed the x2_4983.06_256k.bin Bios file to bank1 with FlashBios. It intitially worked but after restarting a second time the console no longer boots to the dashboard (2 restarts followed by no display(green/red) on both bank 1 & 2. If chip enable is off it still boots to stock dash/unleashx. I have tried reflashing with Xblast via HeXen and FlashBios but an "Flash Not Writeable" error appears whether the chip enable is on/off. I tested both top/bottom side D0 points. Any ideas on what I can try to reflash the chip? Thanks

I just bought this used knowing the startup was a little finicky at times. Everything was working fine, but now on startup I get 4 clicking sounds and after 3 times it frags. When I turn off the modchip it boots into the blob just fine. can anyone point me in the right direction to resolve this problem? This is a crystal version: 2004-10-04, other than that I haven't found any other info.

I was running some Halo system link no issue. When I switched over to Brute Force and Mechassault the link failed to see another Xbox.I am using a unmanaged switch. I used one of these back i the day https://www.ebay.com/itm/Radica-Gamester-RC73220-LAN-Party-4-port-hub-and-Gamester-power-supply/164263467360?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649. The question is do some of the old games need a hub not a switch for connection ?

Hey there guys. I'm an og modder from the xecuter days and am looking to get back in the scene again. When I was in high school in 04, i started looking into xbox modding and discovered how awesome this console was. I was in the team-xecuter forums and a couple others I can't remember and posted frequently. I got my first xbox in december of 04 and installed an xecuter 3, an x3 control panel and a 250gb hard drive. The first time I saw the flashbios screen and flashed via http is literally one of the happiest memories of my life. I believe i used slayer's 2.4 installer. I put blue leds in the controller ports, an 80mm blue cathode ring under/around the jewel and blue leds in the clear controller dongles. It was a masterpiece and I was one stoked teenager. I modded other boxes in a similar fashion for friends and a few random people who became friends as a result. Sadly this xbox got stolen in 2008 and i never saw it again. This causes me pain to this day. I found an xecuter 3 box on ebay with a control panel and plan to make it just like my old one plus a few extra mods like the makemhz hdmi, extra ram and the 1.4ghz processor with the help of an interposer from n64freak, if he has any left. I know kekule is working on one as well as an xecuter 3 clone that i hope to help him finish and get into production over the next year or so. I've yet to meet the guy, so I may be getting ahead of myself, but I am hopeful! The xbox modding scene is one of my greatest pleasures and joys. Few things make me happier. If my plans come to fruition, I hope to become somebody in this community that everybody is familiar with and can rely on for anything. I also hope to gain some knowledge from other people here that will help me in my future endeavors. That would be pretty cool. SS Dave, you post everywhere and you are the man. N64freak, I fucking worship you and hope to be as skilled as you are pretty damn soon. Happy new year, guys.

I have an old Xbox that has an Xecuter 2 chip installed, it still has the stock HDD so i'd like to upgrade it to a 500GB SATA. Weirdly I cannot physically see any chip soldered to the board, I can see some yellow wires going out the front of the console so i'm not sure if this is where the chip is located? (see pic). In any case I have downloaded the HeXen 2018 installation disc, and I have the necessary parts required to convert from IDE to SATA. Is this disc capable of setting up a HDD with this chip? I took a couple of pics showing my kernel and the fact my current HDD is locked:

Is it possible to repair xecuter modchip by replacing actel IC, if any programming necessary? I plugged the chip backwards, made some crackling sounds, but no explosions or magic smoke.

$550CAD plus shipping Payment through PayPal. Selling a unique system to a new owner, I put together a great console with unique installed custom parts with a stealth switch to choose between empowering a lighted display or a dark environment while gaming. This console is carrying an Xecuter 3 signature mixed with XCM's fitted 3x hard drive bay module which allows you to switch between 3 different hard drives which contains three different dashboards. On the primary dashboard running UnleashX is themed with my signature advanced new age dynamic themes that I personally created and only available to valued supporters. In the inside of the console has dual custom LED heat sinks on the GPU and CPU branded by Vantec's rare out-of-production IceBerq 4 Pros. HardWare: v1.2 Xbox Dashboard TSOP X2 Bios Samsung DVD Drive (Rare)Xecuter 3 Jewel (Mad Modders Edition) - only one I have... (Rare)x2 Vantec IceBerq 4 Pro (CPU & GPU) - re-pasted with Arctic MX4 (Rare)Xecuter 3 (Christmas Edition) Chip - Includes bank selector on front (Rare) Xecuter solderless Xapt3r V1.0-1.5 Custom LED Rocker Switch (Powers LEDs On/Off) (Rare)XCM Xtender - Extends the Xbox hard drive capacity to 3 drives total. Custom Blue LED PCB face plate under glow bars - hooked up to rocker switch Custom Blue/Red front eject/power LED Custom Blue LED jewel PCB - hooked up to rocker switch Custom Blue LED controller ports x3 Stock 8GB Seagate Hard Drives. Software: Drive 1: UnleashX Dashboard Emulators Homebrew Applications Drive 2: User Interface Dashboard Emulators Homebrew Applications Drive 3: XDK Lancher Dashboard Console Applications Pros: Has rare hardware Custom colored boot animation Config Live 3294 with recovery (flashed to work with v1.6 xbox as well) Ability to boot 3 different drives on the same Xbox Turn LEDs on and off with a switch Cons: Some scratches or nicks on the console Xapt3r has a wire soldered to the D0 (pin broke off) - works better than before. XCM IDE cable cannot be removed from Hard Drives(will result in damage to the IDE cable) IceBerq 4 Pros are fans noisy (due to age) FYI: If console fails to boot on arrival means the pin from the Xapt3r has fallen out, the bank select button was switched in transfer or chip has come loose (you can still access the inside). Keep in mind when taking the console apart or modifying it by any means do not remove IDE cables from the hard drives, they're basically plugged in permanently. I like to keep customers up to date to know what they are buying if you have any questions please ask. Selling as is.

I've had a v1.6 Xbox with a pro-fitted Xecuter 2.6CE since 2005 and its been pretty much perfect until recently. On two or three occasions its refused to boot either via the Power button or the Eject/Close button. I get a green/red flashing LED typically indicating a hardware error. Sometimes it does that once and then shutdown, others times it frags. However I found that if I shutdown, switch the chip off, boot to Error 5 (unlocked HDD) then switch off and reboot with the chip back on everything is back to normal. But yesterday I noticed something else weird: the chip has two 512K banks with the originally supplied custom EvoX BIOS on both. The only difference between them is Bank 1 has the EvoX logo and Bank 2 doesn't. I usually have it set to the EvoX logo one but now it has swapped to the non-logo version on boot. It doesn't seem to matter whether I switch banks or not. You might think a connection problem with the switch array ie. it is stuck on Bank 2 but, here's the weird thing: if I Reboot from my Unleash main dash or IGR the EvoX logo version BIOS appears to be used. Never heard/read about anything like this - any ideas what is going on?

Hello All, I have what seems to be a fully working Xecuter 2.6CE in a Revsion 1.6. XBMC4GAMERS and games are working, but I can't seem to find anywhere in settings where it shows the bios version or that it even recognizes the Xecuter 2.6CE mod chip. If I hold the black or clear button on controller during boot, it just loads normal to XBMC4GAMERS. Same if I hold the power and eject button at same time on startup. I do NOT get a "Xecuter Rox My Box" logo on startup screen, but only "Microsoft". Is the "Rox My Box" only a X3 thing? I get a "Evo X" in top left corner of the same green xbox loading screen. Just curious if my bios could be a better version or if I should just leave it all as is since it is working. If I select Bank1 or Bank2 on the switch on front of unit, both load fine and work, but seem identical. Where do I find what bios version I have? Thank you!

hello guys, I have an xbox version 1.4, and my default dash is evox, with the OG installer I can change the default ok? risk losing my softmod?

Hello All, I finally got my Xecuter 3 CE working! I had to swap to a whole new console since the video out died on the old one. Somewhere in the troubleshooting of the old console the bios seems to have been wiped from the Xecuter 3 CE. Currently I am succesful getting it to boot to FlashBIOS 3.0.1, but don't have a file to load there. I've been googling, but most of the old download links are broken. What is the latest version Xecuter Bios that I am looking for? Anyone have please? Should I load it on both 1MB banks so this doesn't happen again? I've been out of the scene 10+ years, so I welcome any advice. Thank you!

I acquired a few Xbox's cheap recently that were broken one of which was throwing an Error 5 on boot. This Xbox turned out to be modded but the solderless LPC header wasn't installed properly, I removed it and soldered a header directly to the board (and wired D0). Now I'm able to boot to the chip but it halts on startup.https://imgur.com/a/GN13n82I Attempted to load Xenium OS 2.1 recovery CD but the menu never comes on the main screen. It did early on but went black and never loaded again. I have tested this drive on my 1.6 Xbox and know that it is functional.Also I installed my Aladdin XT modchip and the system will boot fine with that. Is there any way to recover this chip or is it dead?

Hey there, I have an Xecuter 2.0 Pro which I removed from a dead Xbox. It was soldered directly to the LPC pads. I put it in my TSOPed 1.0 (pin header) and all I can get it to do is FRAG. According to an old install tutorial I found it is supposed to FRAG when the chip is on and your D0 is wired correctly, and I'm fairly certain that connection is good. My trouble is that the DIP switches don't change anything. If I have that chip plugged into the board, it frags no matter what. This is a really old chip and it has an external LPT programming interface. Should I try to hook that up while its FRAGing? Has anyone every installed one of these who might be able to give me some insight? Thanks!

Hi, I want to get back into making custom x2 4981 bios's but need the XBOX TEXT.3ds file as mentioned in the screen grab below (x-projects.org is long gone). I know I could use a newer bios but I liked messing with this particular one and having everything on the tsop rather than having a config file on the hdd. If anyone has it could you please PM me? I have 3ds max and deep exploration but I can't find this, any help or links appreciated

Can I ask the community for some help please: I’m trying to make a back-up of my WD Blue 1TB hard drive from my Xbox and can’t seem to get the duplicated drive to boot. My Xbox is modded with an Xecuter X3 chip and that is working fine; I have the X3 panel on the front which is lighting up blue and booting ok with my original drive – and it is booting to the X3 bios on my duplicate one. I’ve duplicated my original drive using HDD Raw Copy 1.10 (through two separate USB docking stations). Obviously I received read errors throughout the process; but it has reached 100% and finished. However, when I plugged in the back-up drive and booted up the Xbox, I got error code 16. When I switched banks and booted to the X3 bios it updated some settings; but when I boot to the bios bank that should be loading my XBMC Media Centre dashboard, I get error code 13. Basically my question is: am I missing something/doing something wrong? I wonder if I still need to “tell” the bios that this is a different drive somehow? Any advice gratefully received thanks.

So a day ago I got a 1.6 xbox with x3 (purple) model in it, and decided to flash force480p bios while I am waiting until my 1.4 with xboxhdmi returns from installer. Flashed that bios successfully, but console does not output any video signal. Also, about a year ago I had another 1.6 xbox with x3ce chip, and I do remember that force480p bios worked flawlessly. Anyone knows what the issue could be? Things I tried: Wiping X3 eeprom (a+b+x+y on bootanim) Downloading bios from multiple sources Flashing over various methods (http flash; ftp flash; flash from internal hdd) Flashing on both 1-4 and 5-8 banks Trying with different HD cables (I have component cables and chimeric systems hdmi adapter) Trying on 3 different tvs

Bios “FAQ”: What does CEE or EEC meen and what is different? CEE/EEC is the boot order of the bios file. CEE will boot it’s first Dashboard from the “C:\” partion of the drive. In most cases it’s “C:\evoxdash.xbe”. Which can be either a the EvolutionX Dashboard or a shortcut to a different Dashboard on any other partition (C,E,F or G). So you could place a shortcut on C:\ and point to E:\Dash\UnleashX\unleashx.xbe and when you boot up your XBox, UnleashX will show up as Dashboard. Screen : https://imgur.com/a/hf6nG5Z In some cases, the evoxdash.xbe can be found, for what ever reason. Then the bios tries to boot the second letter “E:\” which points to UnleashX (In the pic above – E:\Dash\UnleashX\unleashx.xbe). If that can be found it will boot UnleashX. And you guessed it, if that can’t be found either, the Bios tries a last time with “E:\Dash\EvolutionX\evoxdash.xbe”. When all of these options has failed, you will get an fancy error screen. Note: For some apps like Dashloader ect. you should use a CEE bios to avoid any trouble. I would say, a CEE is the most user frindly option even, if you have more experiences, it makes no differend. EEC will boot it’s first Dashboard from the “E:\” partion of the drive. They point mostly strait to a Dashboard like “E:\Dash\UnleashX\unleashx.xbe” or “E:\XBMC4Gamers\default.xbe” as you can see in the screen below. Screen : https://imgur.com/a/GsFOZCo So that’s the main difference between them and they are the most common bios variations. But every “rule” has his exceptions. Some times you have bioses like “EFC” or “FFC”. If I remember right, the X-Disk from FireFucker has those bioses. Not sure why but if I had to make a guess “FireFucker – FF” = F partition. But thats just a guess. So you see, you can point your bios to what ever you want. C,E,F or G, it just depends on you. But there is a little “twist” in here. Some old Dashboards lile tHc, BlackStromX (BSX) and some other will need a bios which boots C first because those are “Hacked” MS Dashbaords. Ofc you could HEX-Edit the hell out of it, like some ppl. Have done with BSX or tHc Lite but at the end, it’s not worth it. All “modern” dashboards boot from everywhere. So let’s move on to iND. iND bioses are a bit different. A iND bios has, not always but most likely, a config file in which the bootorder is stored (you could inject the config to the bios but, for 1 sec it’s not worth the trouble you could get into and in case you use a 5004.06 bios it could breake your XBox). To edit the config of the iND bios you can use the IND-BIOS Configurator or notepad. It just depends on your personal taste. Like you see in the screen below, in the “ind-bios.cfg” and in “ IND-BIOS Configurator” appears the same. It’s almoste or is the same like you have already seen in the EvTool for EvoX bioses. Screen : https://imgur.com/a/YSWRajj And they work the same way. You can do CEE, EEC configs if you want and inject them and you would have an EEC, CEE bios like you have with the EvoX bioses but that not very common. Most ppl. prefere to use the config. A plus here is, you can edit the config fast and you don’t need to re-falsh a bios just to make the change work. Example - iND bootorder (ind-bios.cfg) DASH1=\Device\Harddisk0\Partition2\evoxdash.xbe DASH2=\Device\Harddisk0\Partition1\Dash\UnleashX\unleashx.xbe DASH3=\Device\Harddisk0\Partition1\Dash\EvolutionX\evoxdash.xbe DEFAULTXBE=\Device\CdRom0\default.xbe The rest is the same like for EvoX. And now the last, the Xecuter bios. Like the iND, the Xecuter bios has a config, the “x2config.ini”. And like in the iND config you can edit it with x2-config-maker tool or with Notepad like you can see in the screen below. Screen : https://imgur.com/a/81liMNt nd yes, it’s the same like in EvoX or iND but you have 2 Dashboard options more which can fail before you get that fancy error I have talked in the beginning. You can change the boot order here as fast as in the iND and you don’t need to re-flash it in case of a change. One different here, you cant inject the ini to the bios like you could do it with the iND but again, who want’s that. Example - x2/x3 bootorder (x2config.ini) dash1Name = e:Dash\UnleashX\unleashx.xbe dash2Name = e:Dash\EvolutionX\evoxdash.xbe dash3Name = e:Dash\XBMC4Gamers\default.xbe dash4Name = c:evoxdash.xbe dash5Name = c:xboxdash.xbe So that it about the CEE, EEC, XBMC or X4G bioses. Some other interesting things which should be cleard up are, that even the name “noDVD” seems to say that you don’t have a DVD drive, that is not true. As we all know the XBox will not boot up when you remove your DVD drive or it’s gone bad. A noDVD bios just disables the check for it so the XBox simply didn’t care if it’s there or if it’s working. And because more and more drives beginning to fail because they get old it’s a smart choice to flash a noDVD bios. BUT you have to keep your eyes open. Because, since HeXEn/TruHeXEn has faulty noDVD bios on it, ppl. Start to belive that you can’ t boot a DVD and some just belive you can use it at all, like I said above. Both isn’t true. So if you have a “good” noDVD bios, you can boot/cold boot any DVD you want. Let’s take a look at the screen below. Screen : https://imgur.com/a/1KA1gmZ Like you can see, the left one is a “good” noDVD bios. It has still “default.xbe” in the DVD box. The one on the right is missing that. So even you have a good working DVD drive the bios don’t know what it should boot. That meens, when you have such a bios on your XBox, you will only be able to launch the DVD from your Dashboard but not if you power on your XBox with the DVD already in the drive. We have the well known HeXEn cold boot bug which hopefully get fixed in the 2021,2022,2023 version? We will see – or not. That depends on Heimdall and his finger. So whats left to say? Oh right. F, G or F+G. And what stand this letters for? They define the layout of the hard drive. So if you have a huge 2TB HDD in your XBox, you have to use F+G (Partition F and G) if you like to use that space. For smaller HDD’s up to 250GB max, a F only would be fine but, you could also use a F+G because there is basicly no downside (Did your PC care if you have just C partition even Windows supports up to 5 partitions? ). That leads us to the last question. Which bios you should choose? That depends. I would say. If you don`t have a 128MB XBox, I would recommend a “EvoX m8+ F+G noDVD CEE” bios. You flash it once and then you can forget it. EvoX is fast it does make the job well and you can do pretty much the same with it like you can do with the others. And if you have an v1.6 you have to use it in case you have a Aladdin, LPC2 or any other “cheap” modchip which just has 256kb. The other option for a 1.6 would be an x2 5035 but that’s an 512kb bios. But if you have a fancy schmancy bling bling 128MB XBox, I would choose the iND but, I have to point out here that there isn’t a “becasue of”. Some nerdynerds have a reason for that, I don’t. So… I think, thats it for this little weivrevo which turned out to be a little bit longer. I hope that I gave you some more or less usefull information and that I cleared things up a little for beginner or HeXEn/TruHeXEn noDVD user. If so, hit the like and subscribe button and don’t miss the next video … PEACE! PS. If you have found a typo, congrats, you have found the copy protection.

Original xbox with Xecuter 3 fitted, good condition and fully working. Comes with the following: 500GB Sata Hard Drive IDE TO SATA Adapter Upgraded IDE Cable Custom Made Component Cable for HD 2 Duke Style Controllers XBMC Dash installed Power Cable £125 and buyer pays postage. Will be sent via DPD delivery. UK only.

Hi all, sadly the Xecuter X3 BIOS User's Manual has been removed from http://x3.bustedchain.com/ and from the team executer site. Does anyone have it saved as a complete webpage that I could go get a copy of? Would be most obliged if so thanks! Or does anyone know of any mirror still hosting these pages? Cheers!

Hi, i purchased a faulty 1.6 xbox which was modded with xecuter 3 and the front control panel, the xbox was powering up but no sign of life on the chip or front panel, upon inspection the lpc rebuild board wasnt installed straight, it seemed to be slightly skew, i didnt really have the proper kit to remove and reseat the lpc rebuild board so i desoldered everything else and re-installed it all into a 1.4 so no need for the lpc board, i now have signs of life on the chip (chip lights up blue) and the front control panel (logo lights red and hdd activity light blinks) however i cant get the chip to enable, ive tried the bank switches in various positions, short press, long press, if i try pressing eject and power together the xbox frags once then powers up normally but the logo light is always red, ive retried all my solder points on the lpc / d0 but to no avail, anyone have any ideas anything else i could try? thanks

hello, i received recently the xblast chip, was intended to use it mainly for ram upgrade but i have a xbox with tsop bad flash. so the xblast has ind bios on bank 512 and x2 on bank 256, i flashed via menu the bank 256 with c:\tsop_m7.bin, went ok. but when i load it from xblast os with a hexen dvd in drive, screen freeze at logo like no dvd was read... tested with samsung and thomson drive. what's going on ? thanks

Hi, managed to get my hands on an X3 / X3CP xbox console, just playing around with it at the moment but needing a bit of advice for my next steps. ive put a 160gb ide in and used AID to format and install a dash (unleashx for now), ive also used the white button on boot to bring up the x3 config live and have a little mess with the settings. (a) firstly its installed on a 1.0 board with fan on GPU, im not a big fan of that board so was thinking of uninstalling and re-installing on a 1.4, worth the hassle? (b) the faraday cage is rusty so need to take it all apart anyway however the chip is sticky-padded onto the cage, best way to remove? possibly sharp knife down the back of it? also the front control panel will need removing to get to the cage, do they clip on / off as easy as the original? ive noticed some original faceplates are more brittle than others, the last thing i want to do is crack it trying to remove it! (c) the lcd display, all ive managed to get out of it so far is 2 lines of text, ive seen people running temperature displays etc, how is this done?, does this depend on the dash / xml files associated with the lcd? (d) I have a 500gb xbox running a nice build of xbmc4gamers but console is soft modded so what dashboard files need to change for the dash to boot on a hard modded console, ie the EVOXDASH.XBE etc

Hello Friends I think this has 2 x 512mb banks on this chip. On bank 1 I have xecuter x5035 and when I switch to bank 2 I get a blank screen, so I presume its empty. I am going to use @sweetdarkdestinyinstaller disc 2021 as it has everything! Is there any software to check this correctly? I have tried the BIOS checker on @sweetdarkdestiny installer disc and it doesn't actually state x5035 but one of the dashboards does identify it. I was thinking of keeping x5035 on bank 1 and flash Evox M8Plus_1.6 nodvd on bank 2. I believe x5035 uses a config ini file to modify its settings, and I can use Evox m8 x4gamers EEC and ignore the presence of the DVD drive. I presume I can do this on the x5035 via the ini to point to x4gamers dash and ignore the DVD? If this all sounds right, which app should use to keep bank 1 and flash 2 as there is a x2 flasher software. I can see an x2config under the BIOS on the installer DVD. @sweetdarkdestinyrecommends "2.2. Flash ModChip or TSOP (No Winbond/Sharp TSOP!)." and there is "2.2.3. Flash Xecuter Bios (XBox v1.0/v1.5)." but I have a v1.6 Sorry for all these questions, I have been thinking about this for days and need your advice. Thank you