Search the Community

Xbox Original Green Limited Edition for sale, good condition and fully working but has been opened at some point as seals are broken. Completely stock nothing modified. Comes with one green controller and power cable. Ive tried to show the inside metal shield in 2 of the photos as there is some slight rusting? I know there was only 5000 of these released in Europe so open to offers as not entirely sure what they are valued? £120 plus buyer pays postage which will be via DPD. UK Only.

Original xbox with Xecuter 3 fitted, good condition and fully working. Comes with the following: 500GB Sata Hard Drive IDE TO SATA Adapter Upgraded IDE Cable Custom Made Component Cable for HD 2 Duke Style Controllers XBMC Dash installed Power Cable £125 and buyer pays postage. Will be sent via DPD delivery. UK only.

hello guys, i'm new and i'm really desperate to find a scheme for an xbox with 1.0 board...i only find scheme or videos for 1.6 ... i'm stuck i'm following this tutorial but ofc the board is different and i dunno which cable go where https://www.youtube.com/watch?v=RNZOVTKGeDk

Just picked up 3 defective Xbox 360s for $5. Hoping the RF boards will be good to connect 360 controllers to the og

It has literally been over 10 years since I've played it. One of the bootup screens says "Xecutor2" at the bottom, so that tells me that much at least. My main question is the three (3) dip switches on the front of the console. Someone else installed it for me, and I forget what each of them does. I think that the left-most one controls whether or not the modchip is active; you wanted to toggle that one off if you ever went onto XBox Live, I think. Can anyone help?

*Disclaimer: No links to file will be provided, this is for discussion only* Not sure if anyone has yet, but I have been running a diff between Barnabus Kernel Repack and the 4400 leak Kernel Tree.. I've only just started looking through, and I have next to no C++, C and C# coding skills so bear with me lol They seem somewhat the same, but there are quite a few files with parts of code removed or added, on both branches. But Barnabus is reliant on precompiled objects (obviously as it's a smaller, almost stripped down and made 'easy' release of the full tree) There are some comments in Barnabus code that isn't in the full tree + CPXXUPD code, and some are recorded more 'formally' (i.e private\ntos\init\init.c line 244 - 254 in both branches) One other thing is the 4400 tree is set to have 'complex's' edits definable where possible, which there are a lot.. One thing that really interests me, is Barnabus uses BIOSPack to pack: 2bl, remainder and kernel into a 'Working' rom (I use that word loosely). The 4400 tree uses rombld, which requires: preloaded, init table, bootloader, kernel and a rom decode file(I think).. this is a drastic difference to BIOSPack.. But the main issue with Rombld is it will not produce a full rom.. by default it will error on the 'preloader' being to big (9008 bytes not 1664 bytes).. To get around that, we can either build for XDK Systems.. Or as I discovered today: modify 'private\sdktools\rombld\rombld.cpp' Line 879 from (2 * 1024) to (21 * 512), to allow rombld to accept the 9kb preloader file.. (I haven't tested a bios rom built with this edit yet) I will post here anything else I discover!

Hi there, so today I upgraded my Xbox’s hard drive to a 2TB WD blue and in unleash X, it’s showing just 500gb available to use as storage. But when I set up the hard drive using hexen, XBpartioner let me choose 900gb partitions for F and G. Is there something I’ve done wrong to not allow the hard drives full capacity? My Xbox had a duo x2 chip and I’m on my bank that has evox bios installed. I didn’t install this chip so I’m unsure of what version of Evox this has. any help in much appreciated. Thanks in advance

I made this a while back.it was made out of stuff i had lying around.it has a modded xbox that has alot of hardware mods done to it.i did a padhack for the controls.it has a internal wifi adapter and i modded a old wirless doorbell into a remote power switch.it can switch between the arcade controls and wireless logictec controllers.i also tsop flashed it and installed a 1tb hdd.check out the video for the full build and please sunscribe to my youtube page thanks. Marvel Arcade Cab.

Hello everyone I wanted to show off my mini classic that I made. It is made from a 3d Printed case that I modeled. https://imgur.com/undefinedhttps://imgur.com/undefinedhttps://imgur.com/7GPs7sP I gave it some primer https://imgur.com/cTubiRv and some paint https://imgur.com/SDab5EQ https://imgur.com/Mek1KPw https://imgur.com/6kHrZN9 https://imgur.com/67ZuHwx Then I went the extra step and made a box for it and had it printed https://imgur.com/AK4X2Ro https://imgur.com/AURtsGc https://imgur.com/J3FOBmy Finally if you are interested, I made a video of me putting it together

A friend gave this modded Xbox but didn't know much about it. I've had soft modded ones. but don't know much about the hard ones myself either. It has a larger hard drive. When you turn it on it gives the 09 error and ring flashes red and yellow. Someone told me that button should be held on the controller when you turn on the Xbox but isn't sure which ones. Would that cause the 09 error? Thanks for any help.

Hello, guys Today I updated my softmoded Xbox with Rocky5 softmod and xbmx4gamers ...everything was ok, until I started to download artwork downloader which is over 600 mb and placed it in E: In the same time I uploaded a game with size of 4gb by mistake in E: again instead of F: So, now the xbox starts green animation and flashes like to start the dashboard, but continue on black screen. My only suggestion is that I consumed the entire E: and on that drive is the xbmc4gamers folder, too....I dont know, but if the dashboard need some space on start maybe that cause the black screen...any ideas to help??? Also, is it possible to connect the hdd to a pc and xplorer360 app to erace that game from E: and to make some space on that drive??? Any help is welcome! Thank you in advance!!!

Xbox console revision 1.0 in good condition with the following specs: TSOP flashed 2TB SATA hdd Digitus SATA -> IDE adapter 80pin IDE ribbon cable On the HDD is the excellent full Arcadepunks XBMC Origins frontend! Here is a video they made to demonstrate it: https://www.youtube.com/watch?v=XirumHggTqc The unit has been fully cleaned, no noisy fan's or bad capictors. The DVD drive is serviced and fully working. The power supply is 220volt Picture gallery with images of the Xbox running: https://jiggmaster.synology.me:5008/mo/sharing/5a0ZhM9jY Item located in Sweden, shipping worldwide Price = €100 excl. shipping

Hey so I have a 1.0 and the main fan header isn't working. Can I just replace the mosfet or is there a greater issue?

Which Xbox dvd drive uses top-60 laser? I found a lot of eBay and Ali express listings for the top-60 laser but without specifying which disc drive is compatible. What are your experiences buying refurb/new optical lasers for the Xbox?

Hi, managed to get my hands on an X3 / X3CP xbox console, just playing around with it at the moment but needing a bit of advice for my next steps. ive put a 160gb ide in and used AID to format and install a dash (unleashx for now), ive also used the white button on boot to bring up the x3 config live and have a little mess with the settings. (a) firstly its installed on a 1.0 board with fan on GPU, im not a big fan of that board so was thinking of uninstalling and re-installing on a 1.4, worth the hassle? (b) the faraday cage is rusty so need to take it all apart anyway however the chip is sticky-padded onto the cage, best way to remove? possibly sharp knife down the back of it? also the front control panel will need removing to get to the cage, do they clip on / off as easy as the original? ive noticed some original faceplates are more brittle than others, the last thing i want to do is crack it trying to remove it! (c) the lcd display, all ive managed to get out of it so far is 2 lines of text, ive seen people running temperature displays etc, how is this done?, does this depend on the dash / xml files associated with the lcd? (d) I have a 500gb xbox running a nice build of xbmc4gamers but console is soft modded so what dashboard files need to change for the dash to boot on a hard modded console, ie the EVOXDASH.XBE etc

Hello guys, I just upgraded my softmodded Xbox to a 500gb sata drive. Everything works great but.. it takes like 30 seconds to boot up which is kind of annoying. Could this be because of the sata adapter I'm using? I'm using an 80-wire ide cable so I know that's not the issue. Or are slower boot times normal? I haven't modded one of these for years. Just wondering, thanks.

Hi everyone! I have a 1.4 with trace issues, upon plugging in the power it starts automatically and when it's off, will occasionally boot at random. I managed to repair one trace as a preventative but not the 3 needed to ensure it's not an issue anymore, I found them too hard to work on https://imgur.com/gallery/ExATwa6 (not my pictures, just as an example!) I did the equivalent of the white wire and blue, is there another place to solder the other green/purple equivalent connections? It would be on the other side of the board I assume.

Hey guys, Wyverino here I am fairly new to the xbox modding scene. My gf just gifted me an old premodded 1.1 for christmas and I love it so far. I just want to tweak it a little more to make it my hopefully favorite console! Wish all of you guys a happy new year!

Hey there everyone. I watched a video on YouTube on a Modded Xbox. During the initial startup of the Xbox, it shows an animation and a custom dashboard. Does anyone know how to add the animation before the menu shows up and how to customize the menu?? I have never seen this before except for this video. Any help would be most appreciated. Thank you. Here is a Link to the Video: https://www.youtube.com/watch?v=uw91sVm2fkI&t=1s Starts at 8:03 minutes Thanks Again!!

Hi everyone. Recently I've been watching some ModernVintageGamer videos on YouTube and really wanted to get out of the drawer my old modchipped Xbox. It wasn t booting anymore because of a dvd reader failure(error 11 and 12) so I got a used xbox for spare parts off eBay,got the dvd player out of it and put it in my Xbox. The Xbox boots but it won't read even original disks. My question is how do I understand what modchip is installed? Can I run any sort of homebrew via USB and upgrade my HDD ? Thanks in advance.

So i have got an xbox revision 1.0 for parts. Inside the motherboard was pretty much immaculate with non-leaked clock cap. Sadly the xbox just FRAGged. I did lots of troubleshooting including dumping the eeprom with raspberry pi, testing it with different psu or trying the TSOP bank split trick for coma console. I thought, that the TSOP must be faulty so i ordered aladdin xt. However the holes on 1.0 are filled with solder and hard to clean up. In the end, i soldered each leg of the pinheader individually. It looks ugly, but there are at least pretty wet solder joints and modchips do fit in it. Sadly it still frags. Images: I have: 1. Grounded the bottom d0 point 2. Grounded BT on the aladdin 3. Tested the aladdin in my 1.6 and then reflashing it with indbios 4. Replaced a R7D4 resistor i accidentally desoldered I also remember, there was possibly a short at Q7R1 part. I fixed it, but two pins next to each other are still shorted according to multimeter. The two pins are those closest to the Q in the Q7R1 marking (left down side on the bottom side picture)

^ Only sellers from within the EU please.

Looking to sell my X3CP xbox. It's a 1.6 with a 2tb hdd and startech sata to IDE adapter with 80 wire IDE cable. The hdd isn't a fully loaded one, it allows you to put the content on that you want but does have xbmc4gamers front end and a few games/emulators on there. The Xerc 2 XE allows you to turn the console on/off via the official dvd remote and also fades the eject button LED's on and off when in standby. No controllers included, but I can include a dvd remote if required (albeit with out battery cover) Video of the actual xbox here: £350 plus postage from the UK. Postage will depend where you are obviously. PM for more info

How can I safely remove the round green Xbox emblem from case? Thx in advance...

After 15 years ive pulled my xbox out the box. Still running clean. Its a 1.6 running xecuter 3. Clock keeps resetting and wont store in memory which i (let me no if there is a fix for it) Hard drive has been upgraded to a 320gb ide hd but i might swap it for a 1tb