Search the Community

Hi all. Came across my old original modded Xbox in loft the other day and had a play and realised I’d missed it. Decided to get back into the scene and do some updates on it. Increase hard drive from 160gb to 2tb and a few other bits and pieces.. i have the old Aladdin Advanced mod chip which boots to evox on long power press and stock on short. Now as Xbox live is no longer a thing on original Xbox, I’ve no further need to keep booting to stock as default. Whats the best way to alter it to have it boot with the chip active all the time? Or is there still a benefit to dual boot? If so can I switch the long and short presses around? Been a long long time since I messed with these things. All help appreciated.

So here's my situation, My 1.6 burned out about two months ago now. Trusty system, but now it's doing the on/off three times frag thing. For 10 bucks I bought a 1.0 Xbox. It however, didn't have a hard drive in it. Error 7. The man gave me back my money and let me keep the Xbox because he didn't know it was lacking a hard drive. So, I have these two boxes. My 1.6 has an 80 gig drive. I received in the mail an Aladdin XT Plus 2. What can I use this chip for to get either of these boxes running? Can I simply plug the Aladdin chip onto the 1.0 board? Modding the 1.6 is a bit ridiculous, and I am not sure if the chip will repair the system anyway. I can't find any info on using the Aladdin chip on a 1.0 board, but with that unit NOT having a hard drive I cannot tsop flash it, so if I can boot it via the Aladdin chip and the then set it up I am PERFECTLY FINE with that as a solution. Looking for as little hogwash as possible. Thanks for your thoughts.

hey guys, i read somewhere that its possible to flash an aladdin modchip with xblast using a nand-x, i have all the parts for this but i need a pinout for the nand-x to the aladdin to flash the CPLD, can anyone help me out with this? i tried to use my old flashcatusb but i couldn't get the chip to show up.

Hey all! 1.6 crystal Xbox here with an aladdin chip. My Xbox fragged with error 7 so I assumed my HDD (softmod) was dead. So I got an aladdin, redid the LPC of course and got it to boot with the purple logo! Same thing though. Narrowed it down to the DVD drive. Whenever the disk drive is connect to both IDE and power, the XBOX with either FRAG with error 7 or if I just connect power it will just boot loop the blue xbox logo over and over. Samsung drive. Assuming its just a dead drive? Anyone hear of this? Any way to repair or do I just grab a drive from another xbox? Thanks!

I"m seeking advice on upgrading the Bios on my original Xbox due a larger hard drive installed which also needs a 32k cluster size. Therefore I'm after a better and known BIOS which has LBA48 (+137GB) and only enables partition6 (f:). Xbox info (Known) Console model: v1 (0a) Mod chip: Super Aladdin Live Hard drive WD 500GB (PATA) *NOS DVD: Thomson (yuck!) so little luck making it boot CD/DVDs Kernel Version: 1.0.4981.6 Current Bios: Unknown - possibility custom (Xecuter2 4981) Currently the xbox HD is formatted 16k cluster size and I am experiencing issues in relation to this and want it to be 32k. When I run XBPartitioner to correct this, it displays: Therefore I just need a more recent bios with LBA48 v2+ that also keeps other feature like In Game Reset (IGR) Which is why I'm asking this question to you. From my research I've learnt that for BIOS that enables partition #6 is labelled as x.06 for both partitions #6 and #7 is x.67. I've read that Aladdin (mod chips) will only take 256k (default). Inside the xbox is the Super Aladdin Live and know little about chip size or amount of banks as only I've found was on the knightdiscount website. Since my xbox possible has Xecuter2 4981, thought these would be go choice: Xecuter2 4983 however after looking at: I have been look a the All Retail Bios Information chart on this forum. All I know if I flash the wrong bios I'll have to re-flash it with hardware I just don't have. Thanks in advance!

How are y’all doing? I’m trying to install the Aladdin chip on my 1.4 motherboard and I need to know if I need to solder the LAN and the HD to the Aladdin chip?

https://imgur.com/a/P7rnmgZ Hi everyone Yesterday I ran into an issue with my install - I have a 1.6 Xbox so I picked up an Aladdin XT and a rebuild board to make the job easier. Should be easy right? - apparently not as I stuffed it up. Basically I made the mistake of following a video where the rebuild board had a much larger space around the pins which allowed for quite a bit of solder to be flowed onto them - I followed those instructions and when I went to put my board on it didn't sit flush. So for whatever reason I decided to solder it in and see what happened. Naturally, it didn't work so I with armed with a lot of patience and a desoldering wick I managed to remove it without destroying any pads or traces - but I have another problem. I didn't remove the unnecessary pin headers for my 1.6 - will the chip still work? and do I need to solder all of the pins to the rebuild board (I'm confused about the plating corresponding to each of the pins) as I'm not sure if I can remove them as you can see from the image the solder has gone directly into the through hole and I don't have the means of removing it. Sorry if this is stupid but I barely managed to get the header off of the board (thankfully I ordered extras) I don't want to have to desolder another one of these. Thanks!

Hey guys, Due to the current situation in the world I have decided to finally install my mod chip. I do have a few questions regarding the install. I have read many guides and watched several videos on how to install these chip(aladdin xt plus2) and I rather not cut the trace on the motherboard. I found this video and I do like the idea of having the chip not light up while the xbox is off and not cutting the trace, Now that being said I know the internet is filled with people who find ways to do things differently but are not the right way to do them(I am not bad mouthing this gentleman) . Now my questions are 1- will installing the chip this way damage my xbox(short/Long term) 2-Is there any guides that you know of that are better(please link if possible) 3-is it possible to have the chip setup/installs so I can still boot into ms dash.(I read it is possible to set it up so a long power press will start the chip) I do not plan to use a lpc rebuild, I can just do it with wire. Thanks in advance

Not done a chip install before but decided to take the plunge and have just received an Aladdin XT PLUS2 including pin-header. Thing is I have two options: install on a v1.0 or a v1.6. I've started by bridging the BT to adjacent GND point so when fitted the chip will be always be on. A bit fiddly and I overcooked the solder on one end but it looks clean enough. The question is what to do now: there are plenty of guides for the the v1.6 but that involves rebuilding the LPC which with my soldering skills I'm not 100% confident about. There is also contradictory information about the pin-header set up too. Some guides remove just one pin others like this very clear YT guide recommends removing four pins. The v1.6 LPC hassle made me tend towards using the v1.0 instead but the guides I've found for that are limited and seem unclear in comparison. Nothing at all about using the pin header, if there are any differences, and the pins that need removing or even what needs to be connected to what. Available pictures are particular poor. It also appears that to use the pin header I'm going to have to remove the existing solder from the LPC holes too. Is the info in the v1.6 YT tutorial about using 5v from the right transistor leg to make the LED only switch on when the Xbox is powered up applicable to the v1.0? Advice/info please.

Hi everyone, I'm a new user,have xbox I don't know what version it is, modchip is Aladdin XT with bios M8plus, but a strange thing happens when I turn on the console by holding down the power button 2 seconds it turns on but when I start any game via the evox 3935 dashboard gets stuck on the loading screen,the chip appears to be deactivated....the power button turns green..after 5 seconds it is power on.

Hello you all, I had an idea, that involved getting an Aladdin XT 4032, and replacing the Lattice chip with an LC4064V one. I was wondering, that after flashing the chip with a JTAG programmer, that the chip would function similarly to an Aladdin Xt 4064, or not. I don't want to go into this, and end up wasting a few dollars, because I didn't ask for help before doing this.

Hello, I have an original Xbox (can't determine which version, looks like 1.4 or 1.5) modded with Aladdin Advance. It worked well until today - I decided to update the bios with EvoX D.6 EjectFix (checksum 74c6235497f474bf88b54b3fc52a20b2). Bin file with it was placed on my HDD so I presumed that it's ok to flash it. After flashing, my Xbox turned off and when I turned it on, it startet to FRAG (two green flashes, then green/red flash with no video). What have I done? How I can undone it?

Hi all, I'm talking about 1 of the 2 XBOXes I bought used. I am in the process of cleaning them as best as possible. One was sold as modded and is clearly modchipped/TSOPed, as it displays "Xecuter2" on boot just by pressing the power button once. So I disassembled the other one, sold without any mention about modchip. Because I didn't know it was modchipped I was going to clean dust and remove clock capacitor but when I tore it apart I did see this chip installed on board: After a good cleaning and putting it back I tried to power it on by pushing power button for 2-3 seconds and I get a bootscreen with "Xecuter2" mark instead of "Microsoft", but I have the same (stock) dashboard as before. I did read that before removing the clock capacitor, having a modchip installed, I must use a suitable (kinda new) BIOS in order to avoid "clock loop" problem. Now that I'm there, what can I do to update this modchip? I have TruHexen2019 dvd iso downloaded from somewhere, if could be useful. I'm kinda familiar with tweaking things in general, as well as other consoles, but I'm just a noob about Xbox modding, so please be kind and patient

Hi there! Got a crystal Xbox for my son and it was already modded with the Aladdin advance chip. As this was done in 2005 it’s soldered in such a way that you can change boot from chip to onboard. This is causing problems when using a HDD without ms dashboard installed. My question is if I can desolder the extra wires on the picture and ground the bt as well as shorting the Lframe like you would with a new plus install?

I have this chip on my xbox, works great. However i am unable to "see" all the space on my HDD (F Drive) What bios should i install on it ? And please someone guide me on the procedure? Thanks

aladdin xt chips. flashed to support 1mb 49lf080a chips. currently programmed with x2 5035 512kb bios (2* banks with same bios). can be changed at buyer request. $25 posted to usa. international available.

Good evening, guys, I need help. Xbox Crystal with aladdin modchip I have a 640 gb wd blue hdd. By inserting the dvd to prepare the hdd and install everything, the partitions are always at zero (see photo). In another xbox always modchip, the partitions are seen, but if I insert or copy some files, at restart they disappear as in the xbox crystal. Partition C 0, Partition F:0, Partirion E:0 HELP!

Can anyone help me so I have this much chip installed I will post pictures if it helps, I didn't do the installation but I have no video out any ideas it sounds like it's working fine but I just don't have any video out if anyone has any ideas please let me know

hi fitting this chip in 1.4, header is installed xbox boots normally with no chip installed. but where is do on 1.4?, and do i ground it or solder it to D0 on the chip?. all info ive found is or 1.6 its so confusing. thanks.

Hi guys, I recently attempted an Aladdin XT plus modchip install on my xbox V1.0. Other then trying to suck out the solder from the LPC ports, the process was relatively smooth. When I first went to boot the box, the Aladdin instantly smoked hard so I it off. At the moment I'm trying to figure out whether it was my install error or a faulty chip. When I remove the chip and boot the xbox, it boots fine and normal. As soon as I add the chip back on, which doesn't smoke anymore, the xbox FRAGS. I tested the LPC pins and didnt get any continuity between ones I shouldnt have. I then tested to make sure the 5 and 3,3 voltages were still good and they were. I was gonna test each individual pin and see if maybe Im seeing 5V/3.3V where I shouldnt, but other then that I'm not sure if it was the install, but instead just a faulty chip. I bought it from Modchipcentral and I've gotten good stuff from them before. Any input would be appreciated. Thanks

hi, does anyone know a uk seller for aladdin xt chips(prepared to pay more to a british seller)?. ebay had 3 or 4 last week, but now only china and hong kong, the one i had saved was 5 quid post free, but now says listing ended, so i thought i'd ask. thanks

Hello all. Just recently got into making my own Aladdin xblast chips. I've noticed a few people around here have been looking for them. Currently have 4 Aladdin chips in stock. The CPLD will be flashed with xblast by this weekend. Please bare with me, if I am out of stock, as my current job only pay's minimum wage, and it is quite difficult for me to purchase materials to make the Xblast chips. I am working to make some more soon. In the mean time, if you need one I'm selling.

I accidentally bridged the two pads below the bt pad to the bt pad will the chip still work?

So i got everything installed and i get the xbox trying to boot 3x (i can see the fan on the gpu spinning) then it flashes red/green and no more fan spinning on gpu but it sounds like my hdd is still going. No picture at any point. I had alot of issues with soldering the D0 point and if im being honest i dont know if its soldered to a proper ground or not i put it to one of the bigger square pads on the motherboard. Also when soldering the D0 point i coudnt get any solder to stay and i couldn't really even see the point anymore so i went above it to another point and scraped off some of the solder mask that was on it and soldered there instead, i was hoping that since it was on the same trace it would work the same but i doubt it works like that. This is the exact chip i used and its a version 1.0 xbox. https://www.amazon.com/gp/product/B07GWQXP62/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

So I have reprogrammed the cpld of the aladdin xt ready for xblasting, I have tried booting the console off an x2 duo lite modchip hotswapping and flashing xblast however Evox Gives me "flash not writable" error. I am using sst49lf080a chips and all of them say the same. I have tried flashing the 1mb bank 1mb dual and 256k. The 256k works with the original 49lf020a and I can flash it however after reprogramming the cpld and fitting the 49lf080a chip the flash is not writable. I have no wires on the modchip and grounded d0 on the board. I am completely stumped and dont want to fork out for a programmer for the 49lf080a chips especially if they could be bad. What the hell can I do or could the chips I have be bad? Serious Thanks in advanced!