Search the Community

I have a xenium chip with led board for sale $100 dollars shipped I have to already not planning I using this one

https://www.ebay.com/itm/Prototype-Xbox-Development-Kit-With-Extras/143246533634?hash=item215a28a402:g:KHQAAOSw9kxcx5ms Prototype Xbox Development Kit XDK "DVT4"Console works, is in great condition especially given rarity and age, DVD drive functions and reads disc's.Never opened all asset tags intact. "Note: not all DVT4 units have the prototype tags just the early run models, which this unit is."

Looking for help with my modded Xbox. I had this done by someone (can’t remember who) back in 2005/2006 and I haven’t started it up in over 5 years. I have tried a lot of button combos and it won’t boot up. It won’t even boot up in regular mode either. No matter what I do it turns on then Immediately shuts back off. It is a Halo edition with the X3 and control panel like the one pictured above. Any help would be appreciated. Also looking for recommendations for someone that could repair it if necessary. 7253D5C9-ED2A-4D4D-A5B4-E6A12DBFF7CE.mov

Re-flashing bios on dead aladdin x2 Plus2. Im not sure what went wrong but i tried to update the aladdin x2 Plus2 to the ind 5003 via Xblast ( loaded oh hdd ) The flash appears to be successful but after a reboot i got the 3 boots and frag. Now it appears the chip is dead.? Thankfully i had another X2 Plus 2 and using that i can boot again I thought maybe i could hot-swap the chip and re-flash the bad one. However when i pull the chip the console appears to freeze and video goes to black. Im running off a Hexe 0.99b11-22 heimdalls xbox engineerind disc to try and re-flash 1.6 pal xbox Any ideas if this is possible?

I'm kinda new to this forum and was wondering if someone has managed to mod a cable to incorporate both HDMI and Optical SPDIF? I own a softmodded Xbox but would like to start improving it bit by bit, and what's first on my list is having both HDMI and Optical Audio (Coaxial would work too)

Hi Does anyone have some current eBay links to suitable cables? I have an 80 way cable but to get it to connect to the bits the cable is twisted all over the place and the orientation seems wrong compared to the original 40 way cable. So links to something that fits tidily and sensible orientation would be great, thanks.... (Global shipping, I'm in UK not USA!)

Hi guys, unfortunately I will have to sell my precious Xbox with X3, X3CP, etc. It's in great conditions and works well. It comes with; Xecuter 3 chip installed Xecuter 3 panel X3CP with LCD screen 160GB harddisk with XBMC en CoinOPS installed Component and composite video cable Controller and extension cord Xbox remote Please see pictures attached for details. Asking 350 euro excluding shipping from the Netherlands. Cheers!

Hi all, I just bought an OG Xbox v1.1 with Xbit modchip (Evox 3.6 bios is loaded). I still have to open it up for cleaning and checking if the clock capacitor is still in place. Up until now, I had only softmodded my other Xbox. So, what should I do to this one? Can I update the modchip's bios with Hexen Tools, or should I use the old updater tool for Xbit? I guess I could still update the dashboard using Hexen tools, right? I'd really appreciate your help!

I’m selling my ogx360 it’s the 4 player option I’m including the receiver and controller to USB adapter to so your all set to use i haven’t used but once there isn’t any issues it is a cool product shout out to Ryan for making it but i just really been only using my wire controller so I prefer some one to have it and use it instead of just sitting there I bought the receiver new paid 30 dollars for it it’s an official Xbox receiver I paid almost 100 dollars altogether I’m asking 80 shipped

Well if someone has asked this question, I can't find it. I have a V1.2, non-chipped XBOX. Was wondering if the EVOX M8+ bios found on Hexen 2018 disc will work for a 2 Terabyte drive? Anybody else got any more suggestions? Thanks

Selling on ebay to make it fair on UK buyers. I really want this to go to a good home, I am only selling as I am moving house and need the money towards fees otherwise I would have kept it eternally haha. Thanks for taking the time to look. https://www.ebay.co.uk/itm/Very-Rare-Team-Xecuter-Original-Xbox-With-TX-Faceplate-128mb-Ram-X3ce-Xapt3r/113716250636

Hey all. i hope you can help. My 'Project Xbox' (V1.4) which i generally tinker with has an Aladdin X2 running IND bios. All my other Xbox's are either soft modded or have Xceuter 2 installed. I've never tsop'd a console and was thinking that i should give it a go and move the Aladdin X2 off too one of my 1.6's that has been soft modded. Can i boot to dash, pull the chip and then flash the tsop? Assume i have already bridged the 1.4 mobo ready for a tsop flash? ( This box, like all my others has a failed DVD that doesn't read discs. so need to do all this from the xbox itself) And... what software should i flash with? Thanks heaps

I have a v1 xbox that I softmodded with the unleash , ummmmm , dash or mod.....ok I'm a noob give me a break. I already successfully modded my own v1 xbox with unleash , i even upgraded the hard drive then to a 300gb one and ripped some of my dvd games onto it. so at this point I felt invincible. I then tried to mod my friends v1 xbox doing the exact same thing. Removed clock capacitor and cleaned installed unleash copied drive to a larger one started loading dvd games However I also tried downloading an emulator. I got it installed , sucessfully played an old diddy kong SNES game , but within the emulator there was a "reboot" option that I selected. The second It rebooted the console now is now in FRAG mode. there is no video output , it attempts to boot twice power cycling every second until the frag. It frags regardless of what drives are connected or unplugged. I ASUME the board has a problem with the firmware or bios and that it's my fault for trying the reboot feature in whatever emulator it was. (i should have just stuck with xbox games) So now i'm in a pickle , I asume the board will need some sort of bios flash or perhaps even a chip installed to fix the bios which is beyond my skill level. AND OR...... if i could unlock either of the two drives that console has I could save the game saves and music the console had on it..... and just buy a new xbox. Basically i need to solve the frag , or rescue the data. any ideas?

$550CAD plus shipping Payment through PayPal. Selling a unique system to a new owner, I put together a great console with unique installed custom parts with a stealth switch to choose between empowering a lighted display or a dark environment while gaming. This console is carrying an Xecuter 3 signature mixed with XCM's fitted 3x hard drive bay module which allows you to switch between 3 different hard drives which contains three different dashboards. On the primary dashboard running UnleashX is themed with my signature advanced new age dynamic themes that I personally created and only available to valued supporters. In the inside of the console has dual custom LED heat sinks on the GPU and CPU branded by Vantec's rare out-of-production IceBerq 4 Pros. HardWare: v1.2 Xbox Dashboard TSOP X2 Bios Samsung DVD Drive (Rare)Xecuter 3 Jewel (Mad Modders Edition) - only one I have... (Rare)x2 Vantec IceBerq 4 Pro (CPU & GPU) - re-pasted with Arctic MX4 (Rare)Xecuter 3 (Christmas Edition) Chip - Includes bank selector on front (Rare) Xecuter solderless Xapt3r V1.0-1.5 Custom LED Rocker Switch (Powers LEDs On/Off) (Rare)XCM Xtender - Extends the Xbox hard drive capacity to 3 drives total. Custom Blue LED PCB face plate under glow bars - hooked up to rocker switch Custom Blue/Red front eject/power LED Custom Blue LED jewel PCB - hooked up to rocker switch Custom Blue LED controller ports x3 Stock 8GB Seagate Hard Drives. Software: Drive 1: UnleashX Dashboard Emulators Homebrew Applications Drive 2: User Interface Dashboard Emulators Homebrew Applications Drive 3: XDK Lancher Dashboard Console Applications Pros: Has rare hardware Custom colored boot animation Config Live 3294 with recovery (flashed to work with v1.6 xbox as well) Ability to boot 3 different drives on the same Xbox Turn LEDs on and off with a switch Cons: Some scratches or nicks on the console Xapt3r has a wire soldered to the D0 (pin broke off) - works better than before. XCM IDE cable cannot be removed from Hard Drives(will result in damage to the IDE cable) IceBerq 4 Pros are fans noisy (due to age) FYI: If console fails to boot on arrival means the pin from the Xapt3r has fallen out, the bank select button was switched in transfer or chip has come loose (you can still access the inside). Keep in mind when taking the console apart or modifying it by any means do not remove IDE cables from the hard drives, they're basically plugged in permanently. I like to keep customers up to date to know what they are buying if you have any questions please ask. Selling as is.

Dear All, I want to use xbmc4gamers as my main dashboard, problem is that I can't ftp with it, I'm using direct connection with a crossover cable, using same settings as UX, but on Filezilla it always says "ER connection refused" something, enable static IP on xbmc, put default IP adress and geatway, user: xbox pass:xbox, everything the same as UX but always ending with an error, what am I doing wrong? Thanks

Hiya, just TSOPed my 1.2v Oxbox and put in a 160gb hdd. I split the F & G partitions 74ish gb each. The F partition show 74ish gb but G partion is 0gb. Used HeXEn 18 and the evox M8+ bios F+G, Both F & G values showed in XBpartitioner 1.3.

Would someone explain where to FTP Chimp 26812 to. I have watched all three video files and am still confused. I am having trouble understanding the accent. The E Partition folder has three files in it. 2 Folders name Chimp and XPB Table Writer and install instructions.. I take it I am supposed to put these files on the root of E Partition? But what about all the other stuff. Most of it looks unnecessary except maybe the Source File folder. Am I supposed to put it in a chimp folder in Applications? Tearing what little hair i have left out. Thanks

Has x3 chip installed and 750gb hard drive 1 blue controller works great also has a crystal control switch it’s a blue halo limited edition Xbox asking 450 for it

Hiya, I have been lucky enough to pick up a Xbox with a X3 chip. Planning to add a 2TB HDD and LCD screen. If anyone can point me to any good tutorials that would be great. Thanks

UP 4 SALE: 2x 2TB V1.1 Consoles up for sale. Tsop flash with X2 5035 BIOS, Both are running my XBMC4Gamers Custom build. Both Consoles come with Controllerport LEDS (1xBlue/1xRed) Both Consoles inlcuding 1x Logitech Wireless Controller, Chinese Component Cable and Schuko-Powerplug. Shipping to Europe only but preferably to german speaking countries as there are some games/titles german only. If youre from a non german speaking country and youre familiar with swapping those i´m more than happy to send it your way. Please PM for more info 1.bmp 2.bmp 3.bmp 4.bmp 5.bmp 9.bmp 100.bmp 107.bmp screenshot004.bmp screenshot006.bmp

I dont know if this has been put up on here before, but i came across this during my quest to fix a v1.2 xbox that wont boot. I have at some point managed to bork the hard drive during this quest Any how this webpage shows how to read an eeprom from an xbox using a Pi and a pin header normally used for mounting modchips in an xbox.. I have installed the program on my pi and got everything ready, just waiting for my header wires to arrive and then im goin to give it a go. My thinking is if i can read the xeeprom i can then use xboxhdm2.3usb to rebuild the hard drive and install a softmod. Then hopefully this bastard will boot again Heres the link .... http://icode4.coffee/?p=22

SOLD - For sale is my X3CP equipped xbox with a 250Gb HD. It of course has the X3 chip installed and is also fitted with the X3IR module for remote power on/off Comes with official power cable, 1 S type controller, component lead and DVD remote/receiver Looking for £260 including UK postage.

hi guys long time lurker first time poster snagged this the other day seller wanted $100aud but ended up swaping a spare xbox one i had laying around so he could play fortnite lol kids these days i added it to my top og collection shelf stared and admired it for 2 days with a semi and got my x3 lcd fix lol. the problem is i have no idea what to do with it now and how to get it up to date

Hello World So I've finally found a Xblast Modchip but... broken one, before buying it, would be happy to hear any advices from the techy folks regarding this situation and what can be done. So seems like the guy who sells it, somehow succeded to crack that U4 chip, and cut a few legs on the Xilinx CPLD, which looks like - they can not be repopulated. The questions are: 1, What chip is U4? 2. Will the new replacement Xilinx XC9572XL CPLD need any firmware? (did not found anything on the xblast repository) 3. Will the SVF from Aladdin Xblast Mod work in this case? (as I know, to launch XBlast bios on Aladdin Modchip, the PLCC32 must have the bios itself, then CPLD also should be written with something) This is how the SVF for Aladdin CPLD LC4032V-XXT44 starts: ! Lattice Semiconductor Corp. ! Serial Vector Format (.SVF) File. ! User information: ! File name: C:\dev\perso\aladdin_xt_mods\1MB_LPCmod_banks\1mb_lpcmod_banks_epv.svf ! CREATED BY: Universal File Writer V2.48 ! CREATION DATE: Tue Dec 23 20:45:48 2014 ! Device: LC4032V(B) Erase,Program,Verify 1mb_lpcmod_banks.jed ! LATTICE_NOTE "Device" "LC4032V-XXT44" ! LATTICE_NOTE "Checksum/CRC" "B6F5" ! SVF Revision: D Format ! ABEL MACH432S30 ! NOTE ispLEVER Classic 1.7.00.05.28.13JEDEC Compatible Fuse File. ! NOTE Copyright (C), 1992-2014, Lattice Semiconductor Corporation. ! NOTE All Rights Reserved. : ! NOTE DESIGN NAME :1mb_lpcmod_banks ! NOTE DATE CREATED :Tue Dec 23 20:45:43 2014 ! NOTE DEVICE NAME :LC4032V-10T44I ! NOTE DEVICE TEMPLATE :M4S_32_30 ! NOTE PIN ASSIGNMENTS ! NOTE PINS portLCLK : 39 : in ! NOTE PINS portPWR : 26 : in ! NOTE PINS portHD : 9 : in ! NOTE PINS nportLRST : 2 : in ! NOTE PINS xportLAD_3_ : 21 : inout ! NOTE PINS fportLAD_3_ : 41 : inout ! NOTE PINS portLFRAME : 40 : out ! NOTE PINS portD0 : 31 : out ! NOTE PINS portX : 30 : out ! NOTE PINS portL1 : 29 : out ! NOTE PINS xportLAD_2_ : 22 : inout ! NOTE PINS xportLAD_1_ : 37 : inout ! NOTE PINS xportLAD_0_ : 38 : inout ! NOTE PINS fportLAD_2_ : 42 : inout ! NOTE PINS fportLAD_1_ : 43 : inout ! NOTE PINS fportLAD_0_ : 44 : inout ! NOTE NODES cnt1_0_ : A_M12 ! NOTE NODES cnt1_1_ : A_M14 ! NOTE NODES cnt1_2_ : A_M13 ! NOTE NODES inst_OSbnkctrl : B_M2 ! NOTE NODES OSbnkSW_1_ : B_M12 ! NOTE NODES inst_OSKill : B_M7 ! NOTE NODES inst_init : B_M13 ! NOTE NODES inst_direction : A_M5 ! NOTE NODES inst_OSdisable : B_M14 ! NOTE NODES inst_IOcyc : A_M6 ! NOTE NODES iportMCUreg_0_ : A_M8 ! NOTE NODES iportMCUreg_1_ : B_M11 ! NOTE NODES iportMCUreg_2_ : A_M9 ! NOTE NODES iportMCUreg_3_ : A_M15 ! NOTE NODES OSbnkSW_0_ : B_M15 ! NOTE NODES signaltypeLpc_0_ : A_M10 ! NOTE NODES signaltypeLpc_1_ : A_M7 ! NOTE NODES N_81_i : B_M5 ! NOTE NODES N_24_i : B_M6 ! NOTE NODES portL1_0 : A_M11

Today I worked on taking apart controllers and cleaning them up. I figured while I was at it I would go ahead and take apart and clean up my remote power button and USB adapter mod too. I made this probably about 12 years ago. I took an Xbox Live communicator apart and replaced the circuit board with a simple breadboard from Radio Shack. I put a USB port where the volume knob used to be and a switch under the mute button. I modded my Xbox with the yellow wire remote power button mod so I wired up the switch as the remote power button. The nice thing about modding this communicator is that I can plug it into any controller and have a remote power button without modding the controller itself. It is also great for softmodding systems by plugging a USB drive directly into the communicator instead of making a USB adapter cable that I would have to search for whenever I work on modding a system.