Search the Community

Original xbox with Xecuter 3 fitted, good condition and fully working. Comes with the following: 500GB Sata Hard Drive IDE TO SATA Adapter Upgraded IDE Cable Custom Made Component Cable for HD 2 Duke Style Controllers XBMC Dash installed Power Cable £125 and buyer pays postage. Will be sent via DPD delivery. UK only.

I messed up. Was fiddling around with configmagic trying to lock the HDD on my chipped Xbox 1.6 so I can transfer and use the HDD on my softmodded Xbox. I followed this guide here: https://www.biline.ca/xbox_uxe_hd2.htm I was able to update the EEPROM as stated and locked the HDD so it can be used on the softmodded Xbox. That worked fine. But now my chipped Xbox turns on but no picture or video whatsoever. I don't know what to do next...

I grabbed a Kernel file from this page and I flashed it with XBlastOS. Does the kernel have to match the original kernel? What is the kernel relative to the BIOS? Normally kernel and BIOS are two very different components of a computer. I shouldn't have been able to flash the TSOP with the kernel correct? How are those kernels meant to be used? I was looking for the default BIOS. Thanks

A friend gave this modded Xbox but didn't know much about it. I've had soft modded ones. but don't know much about the hard ones myself either. It has a larger hard drive. When you turn it on it gives the 09 error and ring flashes red and yellow. Someone told me that button should be held on the controller when you turn on the Xbox but isn't sure which ones. Would that cause the 09 error? Thanks for any help.

Newbie here! So glad to see some kind of OG Xbox community still exists! I'm not the most social bean but I will try! Hopefully I can bring a new level to the community with my tool I am working on to help build Xbox OG source code super easy, called Easy-Build Xbox EDIT: I am not sure on the rules yet of posting about and linking my tool, as the nature of it is source code, as long as there's no direct links on the forum is it okay? But for now I'm saying hi and learning about the forum!

hello, i received recently the xblast chip, was intended to use it mainly for ram upgrade but i have a xbox with tsop bad flash. so the xblast has ind bios on bank 512 and x2 on bank 256, i flashed via menu the bank 256 with c:\tsop_m7.bin, went ok. but when i load it from xblast os with a hexen dvd in drive, screen freeze at logo like no dvd was read... tested with samsung and thomson drive. what's going on ? thanks

My OG XBOX is a version 1.4 and has been TSOP modded and is running INDBIOS 5003 with F & G support. I am using Rocky5's ISO BIOS patcher as the first thing that runs at bootup (DASH1 in IND0BIOS.CFG) to get ISO loading working and that is fine (I used to run UnleashX and needed it, not sure I still need it with XBMC4Gamers but assumed so since I'm using INDBIOS 5003). I assembled the patcher.xbe (named it "XISO Loader.xbe") with it pointing to the dashloader.xbe at C:\DashLoader (renamed from C:\evoxdash.xbe) which, in turn, defaults to my XBMC4Gamers default.xbe at E:\XBMC4Gamers\ directory. I edited the "A" .cfg that resides within the C:\dashloader directory to point to the Enigmah PAL/NTSC app in my E:\Apps\ directory in case I want to switch video modes. All of that works great. I can boot to XBMC4Gamers by default or hold "A" and get to the Enigmah video switcher to select PAL or NTSC. Fantastic stuff! But, now, I am trying to get the dashloader configurator GUI to work for configuring the dashloader button settings and I can't get it to work. I installed the dashboard configurator from the URLDowloader within XBMC4Gamers into my E:\Apps\ directory and that seems to work fine as I am able to run the configurator which loads the settings from somewhere and will save settings somewhere BUT it does NOT really impact the A,B,X,Y, etc. .cfg files within the C:\cashloader\ directory. What am I missing? Thanks in advance for any assistance.

I've spent some time kicking around the forums, but appear to be running in circles, so hoping for an assist. Last month I grounded out the power supply on my 1.1 while doing a 2TB SATA upgrade. The SATA/IDE board touched the power supply as I was re-assempling the box (I left the power live like a bozo). I purchased a new power supply to find that the board was dead (non-stop frag). Purchased a previously soft modded 1.0 box, removed and cleaned up the clock cap and was able to boot to UnleashX. I'm now in day 4 of trying to install my old, previously fully functional, X3CE onto this new board. de-soldered d0, LAN, HDD wire no problem de-soldered pin header cleaned up solder in 1.0 header Installed old header back in 1.0 Connected everything up LAN/HDD lights on X3CP work great FRAG I'm running out of ideas. So far I've tried: Booting into flasbios via eject/power: FRAG Booting to softmod using power long press: works Re-soldering the pin header thrice using a continuity tester to check each header pin against this post from livefast1989: all but pin 7 check out (i think the point may be wrong) Tried booting into softmod and flashing w/ Hexen: Mfc ID 18 / Flash not writeable Booted xblastOS from softmod: Sees X3 as the chip, wont write to it via HDD or LAN I have loads of pictures of the install and all errors. Is there something I could be missing? Could I have nuked the chip when I murdered the power supply? Is there a tool to rebuilt the factory state of the x3CE?

Hi, I’m new to anything to do with mod chips on the original Xbox so my apologies if I sound like a complete noobie. I recently purchased a Xbox of Facebook market place that has a DuoX2 (blue) mod chip installed. When the console boots is has like a green logo in the top left and Slayers 2.7 underneath the Xbox logo at the bottom of the screen (I’ll add a photo to explain what I’m talking about). Then it boots into evolutionX dashboard I believe. I’ve dabbled with soft modded Xboxes before and wanted to take a crack at a mod chipped one but I’m worried I’ll brick the console if I just try and re flash bios and install a new dashboard. So long story short, is it possible to update the bios on the mod chip to someone a little more recent like EvoX M8 or something? The Xbox is 1.4 console. I opened it and cleaned the console of dust and re did the thermal paste and fixed the DVD belt prior to wanting to update the dashboard and mod chips Bios. any help is much appreciated. Kind Regards, Karl

I put together a package with all the software needed. I also included the SVF file generated by ISE's impact. This is now the easiest method for programming OpenXenium's CPLD chip. After setup, it's just one click. Merry Christmas and enjoy! https://sites.google.com/view/xc9500xl-with-openocd-ft232r/home

Hi all I was playing Black earlier (great game) and left it for a while, came back and it was frozen. Not too surprised. So a couple of restarts later and it's just getting worse. To the point where I can only get into XBMC for a minute or two, but can't launch a game without it freezing. At this point I can still hold the white button and get into the X3 boot menu. The power supply looks in a bad way, and I have an identical model lying around, so I swap it out and - no dice, pretty much the same thing as before. Try changing the hard drive: Acts up a lot, get one or two boots out of it before i'm back to square one again. Notice I can still boot into that blue screen where you can flash stuff, I figured maybe my BIOS had gone bad with all the freezes and restarts. Drop a new bios into a folder named C:/BIOS. Load back into the blue screen and manage to start flashing, gets about 3/4s of the way through and it just freezes again. At this point it's completely fucked, just fragging, occasionally it gets to the "X" BIOS screen. Absolutely heartbroken at this, it belonged to a friend of a friend who died in 2005 in a motorcycle accident. If anyone has any idea what could be up with it i'm all open to ideas or paying for repairs (UK) if someone really knows what they're doing. I really don't get it, I pretty much ruled out the HDD, i don't THINK it's the PSU since i replaced it and same again. Just don't know what's up with it. Won't boot into a Hexen 2019 disc I made either. Please help!!!!

Hi all I was playing Black earlier (great game) and left it for a while, came back and it was frozen. Not too surprised. So a couple of restarts later and it's just getting worse. To the point where I can only get into XBMC for a minute or two, but can't launch a game without it freezing. At this point I can still hold the white button and get into the X3 boot menu. The power supply looks in a bad way, and I have an identical model lying around, so I swap it out and - no dice, pretty much the same thing as before. Try changing the hard drive: Acts up a lot, get one or two boots out of it before i'm back to square one again. Notice I can still boot into that blue screen where you can flash stuff, I figured maybe my BIOS had gone bad with all the freezes and restarts. Drop a new bios into a folder named C:/BIOS. Load back into the blue screen and manage to start flashing, gets about 3/4s of the way through and it just freezes again. At this point it's completely fucked, just fragging, occasionally it gets to the "X" BIOS screen. Absolutely heartbroken at this, it belonged to a friend of a friend who died in 2005 in a motorcycle accident. If anyone has any idea what could be up with it i'm all open to ideas or paying for repairs (UK) if someone really knows what they're doing. I really don't get it, I pretty much ruled out the HDD, i don't THINK it's the PSU since i replaced it and same again. Just don't know what's up with it. Won't boot into a Hexen 2019 disc I made either. Please help!!!!

as the title says, i have a fuckton of xboxes i modded with 2tb drives that i wanna get rid of. for more info, dm me, thanks.

so I got a new Samsung SDG-605 drive and wanted to replaced the aging Philips on my 1.1 machine with it. except I'm having this weird problem with it. sometimes the Xbox hangs on the "xecuter rox my box" screen for a few seconds before booting. when that happens, the Samsung drive shows "init" rather than "empty" and won't read any discs. checking the system's settings tells me it's not recognizing the drive at all. I can get it to boot normally sometimes though, the drive works fine then. I've tried several things already, a different ide cable (even the stock one), power supply and cord, with and without the top case. formatting didn't help, either. I'm guessing it's either the ide to sata adapter (it's a startech) or maybe the cable needs to be in the correct orientation (blue on the board)? or did I get a dud drive?

Hello ! I really tried looking everywhere but I can't seem to find anything regarding my problem. I have a softmodded box with UnleashX, normal stuff. I have downloaded the Rocky5 Mod, I have the Xbox Softmodding Tool Extras Disc.iso put in the Xbox Softmodding Tool Extras Disc folder, which is next to the Detacher folder. Both folders are in the apps folder on disk F, they show up in the Applications menu. So I start up the Xbox Softmodding Tool Extras Disc app, I get a black screen, and after a couple of seconds it just gives me the UnleashX logo and boots in the normal dashboard with nothing changed. I can't seem to find anyone else having this problem, don't know what to do.

Not sure what happened but on startup the screen froze on the boot menu with evo x insignia. now It tries to start twice and either dies or flashes red green with no screen output. Machine is hardmod with alldin xt plus chip using lpc board ver 1.6 stock hd Is this a dead hd or something else? I thought it was a bad dvd drive ( sometimes it wouldn't eject) but am not sure. I was planning on a 2Tb upgrade but was enjoying learning FTP into xbox of games I wanted to play first knowing I was going to need more space. I hope I don't have to start from scratch .

I've got 4 Xboxes I've softmodded for my family using Rocky's softmod tool, and I nulled the keys as well during that process (all zeros, but will soon upgrade to all ones to be compatible with Insignia - hopefully its an easy process to upgrade the softmod dashboard/tool). I currently have a larger drive in one of them that has the dashboard, emulators, and games set up just the way I want it. I want to put larger hard drives in the other three and have all four be the exact same setup. Rather than cloning the stock hard drive to a larger drive during the upgrade process and then spending the lengthy time FTPing over the hundreds of MB's of data with the data rate transmission limitations and drop outs inherent with FTP, since all the XBOX's have nulled keys I was planning on just taking the larger drive I've already set up and cloning it 3 times - and then putting those cloned drives into the other 3 xboxes. Much simpler and quicker. However, with Insignia needing the Serial Number, HDD Key, and Online Key for each Xbox would cloning a hard drive from one xbox and putting that newly created hard drive into another xbox change the way the serial number or online key is read in the "newly upgraded" Xbox and make it incompatible with Insignia? Or does it not matter as it will just pull the serial number and online key from the mobo and doing what I described above will still be compatible with Insignia? Thanks all!

So I bought a cheapmod from ebay to try something different on a 1.6. Soldered in the rebuild board and installed the chip, adding the one wire from the lower LFRAM via to pin 3 on the LPC header. Won't boot from chip, and on top of that, installing the chip causes the LFRAM cut I made to then have continuity thus booting the stock TSOP chip. I would think I screwed something up but I slapped my openxenium chip I have in my parts drawer and it works fine. I've been looking at diagrams for 2 days now and can't figure it out. Does Pin 4 need removed from the pin header I soldered in? I've seen some guides that say Pin 4 can't be installed for this.

Happy hump day

i'm using the official xbox HD adapter and high quality component cables but i always get interference. anybody know why and a way to fix it?

for some unknown reason, xbmcegamers can't see the halo 2 update. it works fine with unleashx but not xbmc4gamers. anyone know of a fix?

i have a shipment of capacitors arriving friday. i'm wanting to try an experiment where i fill all the cap spots(instead of just the 3 spots) in front of the processors with 3300uf caps to see if the extra power being available to the gpu/cpu help the xbox's performance. my question is, is there any chance that this will damage the xbox? also, has anyone ever tried this before?

I recently bought a Xbox Crystal edition with 1.6 revision board. I’m told the HDD has been upgraded to a 7200RPM 160gb seagate drive and it has an aladdin XT mod chip. It worked fairly well for a couple of days, crashing once or twice and showing error code 07 or 21 a couple of times. I have some tolerance for this kind of thing from old hardware. This morning, however, it was a nightmare to get working. Error codes 07 and 21 came up (mainly 07). It booted up a couple of times operating very slowly and not recognising the HDD. The times I have got it working, games have crashed after about 20 minutes claiming that the disc is damaged even though running from HDD. Any ideas!?!

Hello All, I have a xbox that i picked up used, and it has a xecuter pro 2.1 (i believe) but it does not have the front or rear rs232 or DIP switch plates. When i boot i get an error of an unlocked drive, so I assume it is trying to boot to factory BIOS and it has a WD 120GB IDE drive in it. I tried to jump the D0 wire to ground as I read that would force it to use the xecuter's bios, and when I do that I get a greyscale screen that "xbox Linux Clean BIOS 1.22dev" screen that tells me to put in a disc. is this something i can do with Hexen? Thank you for any help

I recently upgraded my HDD successfully to a 1TB HDD. Set everything up with Hexen. Made sure my F partition was setup with 64k cluster size. Yet now almost halfway through my F drive being full, i can no longer copy files successfully to that partition. Whether it be via FTP or the file manager on the console itself. I get no errors via FTP, all i see is that it changes to passive mode, but nothing actually copies. I do get an error with the file manager, its just an error number. Doing some research it seems that it would be the cluster size of the partition. But i checked with xboxparitioner 1.3 and it is indeed 64k. I am going to copy off my data, and reformat the partition, verify all my settings again, but curious if anyone has any idea to what the issue can be? I hope its not a faulty drive as it is brand new. Thanks in advance!