Jump to content

Welcome to our site

Take a moment to join us. You can sign in with Facebook with a couple of clicks. No need for a lengthy registration. We also have Tapatalk support so you can use this forum on your phone the same way you use facebook. It will keep you notified.

MvZiC MaN

Internal Wireless (Wifi) Adapter

Recommended Posts

Alright guys. The time has come.

Here I'm gonna be adding an internal WiFi adapter to my OG Xbox because, lets face it, Wires are ugly, they get chewed by your dogs and people trip over them. and come on WiFi in an OG Xbox!!

Heres a list of Tools and Materials you'll need
Torx T20
Torx T10
Soldering Iron
Solder
Drill with assorted bits
Wire Cutters
Heatshrink or Electrical Tape
Multi-Meter
Dremel with cutting disc or small hand saw.
Assorted files or sand paper
Wireless bridge gaming adapter
RP-SMA Female to Male Pigtail
Rj45(Ethernet) Female to Male adapter
some Motherboard standoffs with matching screws


I got the idea from the youtube user "Thewheelman282"
Link to video Please login or register to see this link.


To start you'll need to pull apart your console.
I'm not gonna explain how to because there are Many sources for this elsewhere.

20294177_10211680523061089_969105844175535939_n.jpg.269da4e1926e5bea042bdeb2f872206f.jpg

 

Next you need to figure out where you want to mount the adapter.
again I'm doing what he did in the video and mounting it to the bottom of the DVD drive.
If doing the same you'll need to pull apart your DVD drive too.
Every drive is different, mine is a Samsung with 4 screws on the bottom.

20245914_10211680523341096_4516248363360487056_n.jpg.6f713a6155f26e65e0fb0fa02f350325.jpg

Once you have the bottom half of your drive,
You'll want to Pull apart your adapter and mark out your mounting holes.
Now use your drill to drill them out.
Start small, you can always make the hole bigger if you need to.

20258317_10211680523781107_3973575527071505028_n.jpg.21b15bf3ed4734e5a4b0bb165526c063.jpg

20374492_10211680523981112_1038319965064830311_n.jpg.a1810d290cae4172594746d88fdea76d.jpg

Time to add the MoBo standoffs, I used 6 of them and cut the screw part off the ones that go inside the drive.
Now you can mount your adapter and put your drive back together.

20246208_10211680524661129_5619566105965921818_n.jpg.0e4607663cb41bef403990824fc30c4e.jpg

20294304_10211680524901135_2137492539806838930_n.jpg.20aa93180177f04a6a1df8204609a5e4.jpg

Now its time to start cutting wires.
Get your multi-meter and determine what wires you need to splice into.
Since my adapter uses 5v I used Pin 01(Ground) and Pin 08(5V)
Heres the Pinout for the Drive side of the DVD plug

59768616dba67_DVDDrivePinout(DriveSide).jpg.e6fd0e72371f8563d2b79dd1e66d996b.jpg

20294306_10211680525381147_3643074857145248245_n.jpg.0aaadc1ee3d7b14e997a8a0691703198.jpg

Next your gonna need to figure out where you want your adapters Ethernet port to be.
I used the same location as in the video for simplicity.

Now your gonna want to get your RJ45(Ethernet) Male to Female converter/Extension and see if it will fit. (Mine did not so i had to trim it down)

20604688_10211776057249384_6491300041227420219_n.jpg.f80ee9895a36d866a2ee68e0538ff943.jpg

In the process of trimming it, I nicked a few wires so I had to pull it completely apart to trace each pin with a multi-meter and solder each wire back into place.

(Dont make the same mistake I did and take your time!!) I was impatient and rushing.

20621206_10211777404403062_6560620067509101316_n.jpg.eb582cadf26fa60e00f6bfed3e8e0abc.jpg

20638434_10211777406483114_8245350338590169626_n.jpg.3e21ae851fcf6a528fe3112fae7a76da.jpg


now you can Take your dremel and start cutting the hole for your RJ45 port,
Once cut it should look something like this.(Again I was rushing, So its not as clean as Id like it to be)
20597386_10211777407643143_833720592354235476_n.jpg.7286b9f42f343b8b1abd22d8cca44b63.jpg
you'll want to test fit the plug, then clean up the cuts with a file or sand paper.

Then mount your new port to the top of the existing one. I used a few drops of Super glue to accomplish this.

20637816_10211777586207607_7435391774966708525_n.jpg.40368c6941c2f175329519739096dd24.jpg\

20604735_10211777409043178_6409613225897860253_n.jpg.498f34a852cb4ea1171134805f718453.jpg

Now you'll need to drill a hole for your RP-SMA Pigtail. (Antenna extension wire)
I chose to put it beside the Ethernet ports.

20430102_10211680637543951_4219341986233259310_n.jpg.5a31b0bbd65370375ad40e7e81c3bcb9.jpg20413949_10211680649264244_3633331365338090745_o.thumb.jpg.86837cd1b625989af6cdd077b36c6bea.jpg20292856_10211680525941161_9049922206882304312_n.jpg.51a8ead3a9ecb1efd63c49d6f0e3d21d.jpgIgnore

ignore the hole by the Ethernet port. Thats for my USB ports.

I put a piece of heatshrink around the metal antenna connector so it doesnt cause any shorts or problems once its put back together

20663979_10211777587487639_1195651969378438060_n.jpg.6d788b0243a387a15884e46d00181d7c.jpg

20664066_10211777587127630_5917163896970069990_n.jpg.1e9ef91bf4c85d03439de7775c2c0e16.jpg\

Its a tight sqeez but everything fits inside nicely, just be patient while your putting things back where they go.

Now you can put it all back together so you can Admire all your hard work and enjoy your now Wireless Xbox.

20622137_10211777411763246_8139397157872045417_n.jpg.c64a381b6e8a2ba88289315b0274b07b.jpg

 

20622269_10211777630608717_4647669236904031249_n.jpg.782787c33ebad5ccbec5c42fb7e53613.jpg

Let me know what you guys think. This is my FIRST Tutorial/Write up.
Tried to give clear info, If you need any additional info ill be glad to help out.

 

 

 

 

 

 

Edited by MvZiC MaN
  • Like 5
  • Thanks 2

Share this post


Link to post
Share on other sites

waiting on parts to do this one too.  realized i need a disc to install the adapter.  anyone have the image of the wireless adapter setup disc?

Share this post


Link to post
Share on other sites
20 minutes ago, mooshue said:

waiting on parts to do this one too.  realized i need a disc to install the adapter.  anyone have the image of the wireless adapter setup disc?

i didnt have a disc. i just signed into the adapter using its IP address and set it up that way.

 

Share this post


Link to post
Share on other sites

You need to sign into your Router and go to "connected devices" then find your adapter by its Mac Address. once you find it, click on it and write down its ip address. The you type its IP address into your address(Search) bar and you should be able to set it up there.

Capturre.png

Share this post


Link to post
Share on other sites

I just realized I have the original microsoft wireless g gaming adapter on the way, not the 2wire adapter you used.

That is the installation disc i'm looking for.  I'll have to try the same method for it and hope the xbox doesn't need any drivers.

Edited by mooshue

Share this post


Link to post
Share on other sites

These kind of adapters don't have, use, or need drivers. everything is self contained pretty much. You just need to log in to it from a web browser to connect to its OS and set your wireless key all done through the network. Once all setup you can unplug everything from the router and install it the way you like in the xbox.

Edited by CptKlink
  • Like 1

Share this post


Link to post
Share on other sites

Not likely, The 360 wireless adapter requires drivers that the 360 has built into its operating System.

 

Just now, JAY TEE said:

Nice mod,just wondering if it's possible to hack the Xbox 360 wifi adaptor to this?

 

Share this post


Link to post
Share on other sites

sorry delete me, accidentally posted just a quote of another post!!!

Edited by mooshue
double post delete me

Share this post


Link to post
Share on other sites

Configured the 2wire adapter but it appears to only support WPA-PSK [TKIP] not AES encryption which is no longer best practice.

Are there any ffirmware hacks or updates that allow the 2wire adapter accept TKIP or am I really stuck getting yet another bridge to output legacy security models?  Any adapters that accept modern security profiles?

Edited by mooshue

Share this post


Link to post
Share on other sites

There aren't any firmware updates/hacks that i know of, My network was already setup for to WPA2/TKIP when i bought my router/modem.
I'm sure there are other adapters that support the newer security encryption, Though i don't know any off the top of my head.

 

Share this post


Link to post
Share on other sites
55 minutes ago, linuxfanatic said:

Very cool mod!

Would it not be possible though, to add wires to the pins of the Xbox ethernet port and then route that to the WiFi adapter?

i wouldn't say it would be impossible, but it'd be difficult. it would render the Original port useless unless you used an inline relay which was more work than i wanted to do. and this way i can use the original Ethernet port and also plug my adapter into my router if i need to in the future. without pulling everything apart

  • Like 1

Share this post


Link to post
Share on other sites
Does this work with the official xbox wifi box as well?
 
I don't see why it wouldn't. But the old ones like the official Xbox one and the one used in this tutorial use a different encryption so they are not compatible with modern wireless routers anymore...

Sent from my SAMSUNG-SM-J327A using Tapatalk

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By OGXbox Admin
       
      Results Below!  I compare load times while controlling all variables of the startech ide2sat2 adapter vs the cheap adapter that most people recommend. There are significant differences in both price and performance.
      cheapo
          ux bootup 2:28 - 3:09 = 41 seconds
      halo 2 load   4:11 - 4:56 = 45 seconds
      coinops dd3   5:42 - 6:25 = 43 seconds
      startech
          ux bootup 8:00 - 8:20 = 20 seconds
      halo2 load    10:05 - 10:25 = 20 seconds
      coinops dd3   10:57 - 10:40 = 43 seconds
      CoinOps was 43 seconds for both tests. This implies that the wait isn't due to throughput of the storage device but rather the zip extraction of the cpu.
    • By Dave C.
      Has anyone tried this?
      Please login or register to see this link.
    • By N64 freak
      Finally found the time to test the Adapter PCBs i built to use an ATX Psu to power an Xbox.

      They are plug and play to easily switch between the original psu and an atx-psu.Might be usable for casemods or laptop builds.

      The adapter is built around the following basic schematic.




       
      It properly convert the Standby voltage from 5v to 3,3v and also shifts the power_ok and power_good signals to the correct levels.

      Also built a small version that can be used to build an extension cord style adapter to save some more space.
      Just let me know if you have any questions about them




×

Important Information

By using this site, you agree to our Terms of Use.