NokSueCow

I forget where I saw it, but I read that to avoid the issues with power saving drives, you need to disable the head parking feature. Not sure if this is a permanent fix, or it just helps reduce the chance of issues. I saw someone on reddit say that they used Autosol for the shielding. I've never tried anything myself. I've seen some caps between the board and fan bulge, but I don't know if any others fail at a more extreme rate.

You've read all the rules and faq, and did whatever it said to request an invite? Is this the Coinops or Backups discord?

V1.0, ST-3944, Thomson, Startech, 80 wire, and WD20EZRZ, udma 5. It also double resets on a bone stock v1.0, though. 10GB Seagate, Philips, Hynix-4034, stock udma. Both tsop, no chip.

Are you tsop or chip? If tsop, what did you use? What bios version, udma speed, default paths? What's your Cerbios.ini look like?

I got around to working on this one again, and I can't figure it out. I completely wiped the stock hdd, installed only Hazeno's C and E (with apps), and it still double resets IGRFull, however IGRDash and IGRShutdown work fine. I then long formatted a new 2TB hdd in FatX, installed Hazeno's C and E with apps, same thing. I only have P/Q while in 4Gamers, UnleashX doesn't show them. Can you verify if you have 4Gamers, that P/Q aren't present in File Manager? There's no possible way for me to have softmod files still present. Would my Cerbios bios be the culprit somehow? I just noticed something in UnleashX Patched. When I loaded into it, the IP was static, so I set it to DHCP like normal, reset to 4Gamers, and now my 4Gamers IP changed to the Static IP of UX Patched, but 4Gamers network settings still shows Default Dash. What's the difference between UnleashX and UnleashX Patched? Some apps aren't named default.xbe, I have to change multiple, if that matters. Unleashx.xbe, XblastOS.xbe, etc.

No error code? 50% Red, 50% Green? If you can get the 1.4 going again, I'd swap the chip to the 1.6 and tsop the 1.4. You'll need to rebuild the lpc on the 1.6. Can you upload some pics of the artifacting? No bulging caps?

Before giving up, I would try removing the dvd power cable to see if it forces an error 12, instead of 06. If so, it's now unlocked until the hdd loses power. While keeping the molex power connected to the hdd, swap ribbon cables from the xbox to a pc and use FatX to copy your u/data folder. If you initially power the hdd via an external source, the xbox is no longer needed after the swap, and can be turned off. The hdd will lock itself back when powered down.

The points don't look bridged, and the lpc looks untouched, I'd say softmod. Did the previous owner say it was indeed modded? No error code at the top left?

I completely forgot about Hazenos guide until you said that. I'm so used to softmods, I forgot. The disc instructions said to repair C and E with my dash of choice, and that's all I remember doing. I then backed up C and E, formatted the hdd in FatX, installed the backups, and here we are. Would this fix Dashloader not working or did I install it wrong?

Yeah. I went from Rocky's v1.2.1 and burned the OGXbox Cerbios Disc v2.3.2 Build 05. Booted it and read the instructions and went good. I deleted the nkpatcher settings folder, I figured I didn't need it anymore. Also flashed the bios to increase the fan and delete the bootanim. Selecting xboxdash.xbe boots to the msdash like normal, either from UX or Gamers. If I do still have softmod files on there, I don't know how to determine which ones to delete, besides the nkpatcher settings.

I did my first tsop last night and flashed Cerbios to it. It all works good, but my IGR double boots as well. Selecting restart/reboot in XBMC operates as expected, only IGR. I've tried disabling AV Check in Cerbios Tool, changing back to UDMA 2, and modifying Cerbios.ini. Heres a video of it, and contents of C. I also noticed that when in UnleashX, selecting 'load ms dash', it says its missing xb0xdash.xbe, I only have xboxdash.xbe. I deleted the bootanim folder for faster boots as well. I downloaded Dashloader Customizer off 4Gamers downloader and ran it, but I feel I need to do something else, it's not working. It created a dashloader folder in C, with the buttons I created, but nothing happens.

Not sure if you saw my comment, but my issue had already been documented to the Cerbios team. Are you BFM or hardmod?

It's best to play a game once to generate a save folder, and then download the dlc and updates. I don't think the downloader TU's will fix broken games.

Yes, all of the ones I've been working on just happen to be v1.6. I already have the circuitscribe pen ready to go for the others. I rebuilt a trace on a garage door opener with the pen a few weeks ago, and its still working. So I feel pretty good about it.

The wiki is the only art I've came across. Just a green X with XCAT logo, and a few screenshots.