GoTeamScotch Posted March 19, 2022 Report Share Posted March 19, 2022 13 hours ago, ShinGoutetsu said: Set up the hdd using fatxplorer, makes life so much easier Fatxplorer is such a useful piece of software. Really helps make Xbox modding more viable in modern days. 1 Quote Link to comment Share on other sites More sharing options...
MadMartigan Posted April 2, 2022 Report Share Posted April 2, 2022 Extremely interested in getting one of these for the right price. Let’s hope the retail cost doesn’t hurt our feelings. Quote Link to comment Share on other sites More sharing options...
ShinGoutetsu Posted June 29, 2022 Author Report Share Posted June 29, 2022 Ive revised the design of the original xbox mini (the one with the tinted acrylic top) to make it wasier to 3d print. It can now be printed in 3 parts which makes it structually stronger and looks much neater. Just about to test print, will update once completed 2 Quote Link to comment Share on other sites More sharing options...
big F Posted June 29, 2022 Report Share Posted June 29, 2022 This looks so good. Quote Link to comment Share on other sites More sharing options...
ShinGoutetsu Posted June 29, 2022 Author Report Share Posted June 29, 2022 (edited) Here is an explode animation Edited June 29, 2022 by ShinGoutetsu 2 Quote Link to comment Share on other sites More sharing options...
Hbomb Posted September 16, 2022 Report Share Posted September 16, 2022 Just stumbled across this looking for reference regarding original case mods; this looks great! Are you sharing any STL files yet for the case, or even the board mock up you made? Thanks. Quote Link to comment Share on other sites More sharing options...
ShinGoutetsu Posted September 17, 2022 Author Report Share Posted September 17, 2022 15 hours ago, Hbomb said: Just stumbled across this looking for reference regarding original case mods; this looks great! Are you sharing any STL files yet for the case, or even the board mock up you made? Thanks. I will share the case files once I'm completely happy with them, I won't be sharing any of the internal xbox part 3d models though Quote Link to comment Share on other sites More sharing options...
ShinGoutetsu Posted September 18, 2022 Author Report Share Posted September 18, 2022 printed the base in one piece (with lots of supports). Unfortunately the sides were very brittle with this filament and it didn't help printing at 20% infill. Will try again at higher infill and non silk petg filament 4 Quote Link to comment Share on other sites More sharing options...
Hbomb Posted September 19, 2022 Report Share Posted September 19, 2022 On 9/17/2022 at 6:37 AM, ShinGoutetsu said: I will share the case files once I'm completely happy with them, I won't be sharing any of the internal xbox part 3d models though Perfect Is the enemy of done! Maybe share the case on Thingiverse, so other people can collaborate and remix it. Quote Link to comment Share on other sites More sharing options...
ShinGoutetsu Posted January 7, 2023 Author Report Share Posted January 7, 2023 The completed xbox mini files are here: 2 2 Quote Link to comment Share on other sites More sharing options...
Meerjel01 Posted January 7, 2023 Report Share Posted January 7, 2023 Would want one running with Insignia play! But I need to talk more since I only made 1 post here. Quote Link to comment Share on other sites More sharing options...
ShinGoutetsu Posted January 7, 2023 Author Report Share Posted January 7, 2023 1 minute ago, Meerjel01 said: Would want one running with Insignia play! But I need to talk more since I only made 1 post here. Both versions external links here: Final Dec 22 2 part xbox mini (mediafire.com) Final Dec 22 2 OLED xbox mini (mediafire.com) 1 1 Quote Link to comment Share on other sites More sharing options...
Meerjel01 Posted January 7, 2023 Report Share Posted January 7, 2023 1 minute ago, ShinGoutetsu said: Both versions external links here: Final Dec 22 2 part xbox mini (mediafire.com) Final Dec 22 2 OLED xbox mini (mediafire.com) Nice! Is it possible making it transparent green like the original? Quote Link to comment Share on other sites More sharing options...
ShinGoutetsu Posted January 7, 2023 Author Report Share Posted January 7, 2023 Just now, Meerjel01 said: Nice! Is it possible making it transparent green like the original? maybe with a resin printer, I only have an FDM printer Quote Link to comment Share on other sites More sharing options...
ShinGoutetsu Posted January 7, 2023 Author Report Share Posted January 7, 2023 some images of the dual oled case which is printed in 2 main parts (top and base) with the IR eye holder and top back edge being much smaller parts. The one pictured also has a 3mm thick laser cut acrylic/perspex faceplate. The second design is printed in just 2 main parts with an IR eye or push button holder (either can be used) The button required is a round 10mm momentary pushbutton or you can use a Xerc2 to turn the xbox on/off via the official dvd remote control 1 Quote Link to comment Share on other sites More sharing options...
Meerjel01 Posted January 7, 2023 Report Share Posted January 7, 2023 Okay. But how do controllers work with it? It doesn't look like it can support OG controllers. Was awhile since I last was here so I don't know if the tech in it is purchased here. How to build it and what does it need? Quote Link to comment Share on other sites More sharing options...
ShinGoutetsu Posted January 7, 2023 Author Report Share Posted January 7, 2023 10 minutes ago, Meerjel01 said: Okay. But how do controllers work with it? It doesn't look like it can support OG controllers. Was awhile since I last was here so I don't know if the tech in it is purchased here. How to build it and what does it need? - The breakaway part of the controller cord is used for controller ports 2 and 3, it also has an internal 2 player ogx360. - A Star-tech ide2sata adapter and a 2.5" HDD - a short SATA cable - a Xerc2 for power on/off (or) a round momentary push button (2 pole) for power on/off - an OLED compatible xenium based modchip - 1 or 2 Newhaven NHD-0420-AX3 OLED displays depending on case version (the X denotes the oled colour, i.e: AB3 is blue, AG3 is green etc.) - a 160-xt PicoPSU and AC adapter - an Atx2xbox adapter (search for it on dirtypcbs.com, version 1.6 is not supported) - 2 x TITAN VGA heatsinks and fans (although i am working on a better cooling solution) - installation of a second fan header if not already present - a 3mm bicolour led for power status, 2 x 3mm led for LAN and HDD activity LED's - optional rear 40mm fan for the single OLED version case design - I recommend a small heatsink for the MPCX and potential removal of some of the start up capacitors depending on motherboard revision - Of course a 3D printer capable of printing this (case dimensions 210mm x 240mm x 50mm) I recommend at very least PETG but ABS is better for printing this, i printed at 100% infill but you could reduce this a bit 2 1 Quote Link to comment Share on other sites More sharing options...
Meerjel01 Posted January 7, 2023 Report Share Posted January 7, 2023 I need to give the instructions to my brother. I talked with him about this but he thought it would be too much for a smaller-sized Xbox. (He don't really understand a lot about this) Quote Link to comment Share on other sites More sharing options...
ShinGoutetsu Posted January 7, 2023 Author Report Share Posted January 7, 2023 2 minutes ago, Meerjel01 said: I need to give the instructions to my brother. I talked with him about this but he thought it would be too much for a smaller-sized Xbox. (He don't really understand a lot about this) It is quite a lot of cost and work, soldering will be required too. This will likely put a lot of people off Quote Link to comment Share on other sites More sharing options...
Meerjel01 Posted January 7, 2023 Report Share Posted January 7, 2023 Unless you/someone can sell a pre-built one for me? That would be real generous. Quote Link to comment Share on other sites More sharing options...
ShinGoutetsu Posted January 7, 2023 Author Report Share Posted January 7, 2023 1 hour ago, Meerjel01 said: Unless you/someone can sell a pre-built one for me? That would be real generous. Sorry I just don't have the time to build them for others Quote Link to comment Share on other sites More sharing options...
Meerjel01 Posted January 7, 2023 Report Share Posted January 7, 2023 27 minutes ago, ShinGoutetsu said: Sorry I just don't have the time to build them for others It's okay. Maybe the case could be used for raspberry pi console devices? Always wanted to make my own gaming console. Quote Link to comment Share on other sites More sharing options...
ShinGoutetsu Posted January 8, 2023 Author Report Share Posted January 8, 2023 18 hours ago, Meerjel01 said: It's okay. Maybe the case could be used for raspberry pi console devices? Always wanted to make my own gaming console. well the cut outs are specifically designed for an xbox mainboard, you would need to change quite a lot for a Pi, including internal mounting points. You may as well design your own case that suits your exact needs to be honest 2 Quote Link to comment Share on other sites More sharing options...
Hbomb Posted March 10, 2023 Report Share Posted March 10, 2023 On 1/7/2023 at 4:25 AM, ShinGoutetsu said: The completed xbox mini files are here: This is beyond great; thanks for sharing! 1 Quote Link to comment Share on other sites More sharing options...
matador Posted March 11, 2023 Report Share Posted March 11, 2023 On 1/7/2023 at 7:45 AM, ShinGoutetsu said: Both versions external links here: Final Dec 22 2 part xbox mini (mediafire.com) Final Dec 22 2 OLED xbox mini (mediafire.com) Thanks man. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.