ShinGoutetsu

They're extruded 1mm into the surface to give a 3d effect

I've done a few versions now. One that uses the original jewel, a Halo one and a Steel Battalion one

Will do at the weekend

I've made a new top part that adds back the original xbox identity, will upload it here soon

Files here:

Slim Case parts list: 1. 4 x controller port cables https://www.ebay.co.uk/itm/202267811844 2. 8 x 4mm x 1mm magnets https://www.ebay.co.uk/itm/204195070562?var=504873089626 3. 3mm led x 2 (for HDD and LAN activity led's) 4. 3mm bi colour common cathode x 1 (for power/eject led) 5. 50mm 12v fan https://www.amazon.co.uk/Gelid-Silent-Hydro-Dynamic-Bearing/dp/B008S1DN66/ref=sr_1_17?crid=3ETPMTKXY2BFF&keywords=50mm%2Bx%2B50mm%2Bx%2B20mm%2Bfan%2B12v&qid=1707643302&sprefix=50mm%2Bx%2B50mm%2Bx%2B20mm%2Bfan%2B12v%2Caps%2C82&sr=8-17&th=1 6. IDE to SATA adapter https://www.startech.com/en-gb/hdd/ide2sat25 7. Short SATA cable https://www.ebay.co.uk/itm/322901628155 8. USB panel mount cable https://www.ebay.co.uk/itm/232202769908 9. 10mm Round Momentary Push Button (for power switch) https://www.ebay.co.uk/itm/124500698456 10. (Optional) Newhaven OLED display https://www.digikey.co.uk/en/products/detail/newhaven-display-intl/NHD-0420CW-AB3/5022951 11. (optional) OLED compatible OpenXenium Modchip 12. 2.5" HDD/SSD sata storage device 13. Brass M3 x 6mm heat set inserts https://www.amazon.co.uk/Printing-Knurled-Threaded-Embedment-Injection/dp/B0C1RRBGC7/ref=sr_1_29?crid=2Z28ESWASWL71&keywords=brass+inserts+m3&qid=1707733782&sprefix=brass+inserts%2Caps%2C88&sr=8-29

There are tools to edit the bios and inject a .x file in place of the text for the x2 bios, I don't know about the x3 bios though. The .x files were created in 3dsmax.

I used to mess with x2 bios's but only changing the xbox text, been a while since I've done it though. All in bios, x2 4981 so no config files

Hi, the link is working for me..

Well everything fits so far

My print bed is 33cm square, yes. The case is 30cm at its widest

Actual print on my Qidi XMax 3, took 10.5 hours (still removing the supports at the moment).

Yeah that's far too much, i guess its due to the mold costs. At that price I'll give it a miss too

No, the mini has been out for a few months. I'm almost ready to release the slim case too

It's in the downloads section

It's not up to me to release it, I did it for Element18592.

The first print is in progress. It's for an alignment check though. The full case will be printed after I'm happy that everything lines up. Them the case files will be released.

Haha thanks. Here's some pics of the case with inserts and magnets that hold the lid in place instead of screws.

made some adjustments, this is an alignment print which will take 11 hours. The case will now use threaded inserts for mounting the xbox board and psu. I've added ribs to strengthen the case.

Awesome work!

Made a start, first the faceplate then I'll work on the rest

Very nice work!

Those xeniums wont have the code required for an OLED unfortunately, Nemesis's are pretty much direct clones of the original xenium ICE. You'll need an enclosure due to the temps required to print these materials. That x3cp is there as I am recreating it in CAD

i think you can get large format printers that are reasonably priced now, maybe not with an enclosure though (which you would need). The oled is a Newhaven NHD-0420 series. You will need an oled capable openxenium modchip for this.