Search the Community

Hello, I have an original Xbox v1.6 with a xenium modchip in it. It's been sitting for years and I finally got it kinda working. When I installed the modchip, I unplugged the fan from the motherboard and ran power wires from the molex connector to get some more power out of it. It works fine, just loud and pretty sure it's not needed. I took it off the molex setup and plugged it back into the stock location on the motherboard but the fan never spins. I also noticed in my xecutor dashboard, the temps never change. Any ideas what could be causing the issue? Thanks in advance!

Just a theoretical pondering as I could not find any info on it. I know you can null a HDD key on a soft mod’d xbox so I was wondering if it was possible to null and lock a hdd using a tsopd xbox then transfer it into the soft mod’d xbox? Cheers

I have a v1.0 original modded Xbox, it had an old Aladdin mod chip, I wanted to upgrade the hard drive and after doing some research I found out I can brick it by flashing a new bios. The bios is unknown but after running bios checker it reads I have a lpc sst49lf020, it boots up xecuter2 into an evolution x dashboard. If I use the hexen 2019 disc, what steps can I take after I install a larger hdd? I don’t need to clone it, I backed up everything using ftp, and I want a fresh install. Here are some images that may help... Thanks for your time.

Hi all, I have an issue with my XBOX that doesn't power on anymore. Model: 1.2 TSOP: Yes, iND-2003 Mods: None other than removal of the clock capacitor Misc: Using the Chimeric Systems HDMI adapter (which is awesome) Yesterday I received a new modchip from eBay, the Xenium Gold with the 24K OS on it. I swapped out my old Aladdin chip and fired it up with no issues. I proceeded to add EvoxM8+, iND-2004, and XBlast on it. I tested all 3 BIOS and they all worked fine. From here I decided to do the 128mb RAM upgrade. I've successfully performed this upgrade once before. I'm using the same RAM that I purchased from eBay over a year ago that worked on my previous install on my other 1.3 XBOX: SAMSUNG 525 K4D263238F-QC50 I proceeded to solder in all the chips, but when I went to turn on the XBOX nothing happened. No light, no response, nothing. I don't ever recall hearing a pop or a snap. I double checked that I connected everything. Troubleshooting: - I thought it might be the PSU so I swapped in the working PSU from the 1.3 XBOX that I successfully did the RAM upgrade on and the same results. - The only thing I noticed was that when I pressed eject or power on either PSU, the Xenium chip LED lit up. If I held either button the LED just flashed. Other than that, no activity from the board whatsoever - One thing I noticed is that I soldered the final chip in backwards (chip 4 according to the XBlast diagram, the one closest to the ATX plug). I should have taken a break after 2 chips due to fatigue but I pushed through and I guess I wasn't paying attention. I used my hot rework station to pull the chip off and turn it around. Same results. - After this I decided to just pull the other 3 chips off to troubleshoot it from scratch, but no joy. - The repairs for power buttons I've seen after searching are mostly just the trace repairs on the 1.0/1.1. I'm not great at troubleshooting so I wouldn't know where to begin without a guide on the 1.2 XBOX. Did I fry the board somehow? Did putting the RAM in backwards just kill it? Did I ESD shock it? Did I get the iron next to something that I shouldn't have for too long and didn't notice? Here's some pics I uploaded to imgur since they're too big. I can take more photos or better photos of certain things if needed. Thanks in advance. https://imgur.com/a/iM2cj5y

I have 2 og xbox 1.6 version. A little while ago I tried mod them and a bad Chinese adaptor for the hdd upgrade got them malfunction. So I ordered some good Panasonic capacitors and the startech adapters. Now that I think of it after the circuit malfunction I got them dedusted and rubbed them with isopropyl and a toothbrush. A fishy smell came out while I did the cleaning which means I have an electronic problem. On the boards I have one busted capacitor and no leak traces. One is hardmoded one is softmoded. How do I check exactly the problem before I try again to upgrade my hdd's? The problem I get from both xbox is the same. Whenever I plugged the hdd molex the xbox would power down instantly. If however I left the molex unplugged they would power up properly with the 07 error though. So any thoughts? I have a way to check the capacitors but I don't know how. The resistance and the power they must emit.

Hey there, I have a chipped 1.6 and I'm using it on my LG 4K TV via component cable, I'm experiencing image drop out (see the video below). I've tried 3 different sets of cables, I've changed the Xbox to NTSC to enable HD video mode. Is there anything you people can recommend for me to try? I'm willing to try anything just so I can get this issue resolved. Thanks! Video link:

UPDATE: The seller is sending me a replacement board. No longer required. Got sent a board from an eBay seller that is FRAGGING out of the box. Many loose capacitors and I fear more underlying problems. I need a v1.0 or v1.1 board, as all I have lying around are single ATX power supplies. TSOP flashed preferred, but if not, then EEPROM extracted, if possible. Please PM.

Will pay good money for one let me know ok thanks

Hello OGX Users, i am am an old Xbox Classic User. I am from Germany, i have a passion for Xbox gaming and Software modding. I play around with some Raspberrys and Betocera, Nintendo Switch and Retroarch. These days i found a Post with Rocky5`s Emustation and the Xbox Fever is back Hope to have good Days in this Forum.

Hello! So after some suggestions from people here on the forum, I decided to attempt TSOPing my 1.0 xbox. Now, I haven't soldered for 4-5 years, and haven't touched an xbox since I moved abroad (have now moved back), so I don't remember much about the whole process. Didn't want to wait for flux because it wouldn't arrive for another 3 days, so I did the bridging without it. (Success btw) Now, for the flashing part, I'm wondering what bios you guys would suggest as the chip has a 1mb bank, and which CD you would recommend for setting the whole thing up (Hexen, Slayer etc). I know this is a bunch of NoOb questions, but I haven't been in the scene for a couple years. Looking forward to your replies! - Fixified

EDIT BY ADMIN: It's not a 1.5. No 1.5 has ever been found because it was a hoax and could not actually exist. Well... Yesterday i got the old XBOX Crystal ( i spammed already in a other topc) and i was thought it's an v1.4 but it isn't (damit). It's an v1.5 Crystal which should be not realy exsist or at least it's a rar one? Anyway, it's missing at least 1 point on the LPC port. Since i never had a 1.5 I'm not realy sure if my plan, adding a Xenium and a Ram upgrade (the pads are still there on the 1.5 so i assume it would work?), will work on those. Do i need some sort of LPC fix like in the 1.6? And out of curiosity, would a TOSOP flash be possible with the 1.5? My final question, are the cases still the same like the 1.3/1.4 or are they already different like the 1.6? Below are some quick and dirty made pics. If someone whan't some in a better quality, let me know from what and i make some better pics for you.

I bought a new OLED65B9PTA tv but am having issues connecting the XBOX to it. I can hear audio but don't see any video. The tv has a 3.5mm socket labeled 'AV1' and an adapter cable that goes from white/red/yellow TCA sockets to a 3.5mm plug and that's what I've connected to. When digging for info I found https://www.cnet.com/reviews/lg-oled65b9pua-review/ which says 'Unlike many of Samsung's sets, this one actually has an analog video input for legacy (non-HDMI) devices, although it no longer supports analog component video.' I'm not very clued up on exactly what the different outputs are. Is the xbox output analog component video and that's why I'm not seeing anything? I double checked plugging into my old TV and the XBox itself definitely still works. I'll appreciate any tips you might have. Cheers, Pete

Hi, thought I'd share a quick story about picking up a faulty xbox I got it to work easily by replacing the 5 x 1500uf capacitors (common fix) I was surprised to find a different modchip than the good old aladdin. It is an Apple-X VI which is supposed to have 2 x 512kb banks according to https://www.ogxbox.com/forums/index.php?/topic/17-modchips-generation-3b-from-xbox-scenecom/ However I could not flash a bios any bigger than 256kb on each of the bank. Not a biggie as the onboard tsop can support 1mb. Booting from the onboard tsop by pressing the eject button and from the modchip by pressing the power button.

Hey all - I'm getting consistent freezes/stuttering on my hard modded Xbox. You can see and hear the stutters interrupt the scrolling in XBMC in the video below (turn up volume to hear it) and some of the stats change to "Busy" at the same time. This occurs everywhere, in-game and in dashboards like UnleashX, but this was the easiest way to capture it. I upgraded this Xbox a month ago and have been playing a lot without problems until now; copied ~600GB of data to it so far. I'm afraid I've just worn out the CPU/PSU. I even plugged the Xbox into my UPS to make sure it gets clean power, but it still happens. Specs: Hard Modded Xbox 1.1 with Xecuter Pro 1.2 chip. Flashed banks 1+2 (512k) with X2 5035 BIOS. Banks 2 & 3 (256k+256k) are unused. Upgraded 2TB SSHD with 80 conductor IDE cable and SATA to IDE adapter. Disk space split evenly between F:\ & G:\ partitions, formatted with 64k clusters. Thermal paste has been replaced on CPU & GPU with AS5. Clock capacitor removed. Tried swapping in and configuring a different 2TB SATA HDD with the same result. Currently testing the HDD, IDE-Cable, and SATA-to-IDE-Adapter in a different Softmodded Xbox to isolate the problem and determine if the issue carries over with the upgrade cable/adapter. Any advice is appreciated!

Hi all, I have a v 1.4 Xbox that was modded with the Xenium ice modchip about 15 years ago. It was in storage for several years and I just went back to using it again. It booted up just fine after all these years after I changed some bad caps and the clock capacitor. I was messing around with the various apps I had installed on it several years ago, and when using the XBMP (Xbox Media Player) app, I changed the resolution in the settings menu and when I rebooted, there was no video output - only a black screen with the "no signal" message on the TV. It looks like the XBox boots up normally (except for the black screen) because the Xenium chip's LED lights up indicating that it has loaded a custom BIOS, and I am able to FTP into the box. My suspicion is that the XBMP app changed a configuration (?.ini) file causing it to output a video signal that the TV (a Samsung flat screen TV with a 720p resolution, I think) cannot display. Can some one tell me what I need to do to get the display back? Thanks in advance for your responses.

Hi, i have space only for to put the og xbox vertical. Is it possible? the dvd drive will not be used. Or is that a problem?

Does anyone know the jack size for the 6V 1A power adapter used for this thing? All the ebay sellers that have the power supply blur out the model number and overcharge.

I got an xbox cheap as the drive didn't open - easy fix I thought and was delighted to find it was indeed an easy fix and that the drive worked. I turned it off and came back 6 hours later to find it was quite warm on the side where the power supply is located inside the xbox. Is this normal or something to worry about? Thanks in advance.

Hi, I'm struggling to read the eeprom of a Crystal 1.6 xbox. Was sold as faulty, hard drive clicking, decided was worth the gamle so bought it as I wanted to replace the hard drive anyway. I have some Alladin XTs coming in the post to longterm this will be hard modded, however I'd really like to find out/change the HDD key from the eeprom and start building a new drive for it. I'm using https://github.com/Ryzee119/ArduinoProm in ordre to read the eeprom.bin file. I've read multiple people talking about how on the 1.6 there is some sort of protection which makes it harder to perform a read operation, but can someone explain exactly that this is and how to bypass it? I'm able to scan the I2C bus using my cable + Arduoino Nano, so I'm pretty confident the issue is the I2C protection for the eeprom.

Not done a chip install before but decided to take the plunge and have just received an Aladdin XT PLUS2 including pin-header. Thing is I have two options: install on a v1.0 or a v1.6. I've started by bridging the BT to adjacent GND point so when fitted the chip will be always be on. A bit fiddly and I overcooked the solder on one end but it looks clean enough. The question is what to do now: there are plenty of guides for the the v1.6 but that involves rebuilding the LPC which with my soldering skills I'm not 100% confident about. There is also contradictory information about the pin-header set up too. Some guides remove just one pin others like this very clear YT guide recommends removing four pins. The v1.6 LPC hassle made me tend towards using the v1.0 instead but the guides I've found for that are limited and seem unclear in comparison. Nothing at all about using the pin header, if there are any differences, and the pins that need removing or even what needs to be connected to what. Available pictures are particular poor. It also appears that to use the pin header I'm going to have to remove the existing solder from the LPC holes too. Is the info in the v1.6 YT tutorial about using 5v from the right transistor leg to make the LED only switch on when the Xbox is powered up applicable to the v1.0? Advice/info please.

Hi I’m new here, just signed up. I’m hoping I can get my Xbox fixed. the problem is my Xbox doesn’t turn on all the way when I have my component OR composite cables plugged in, it turns on, briefly shows orange, then shuts off but when I unplug the video and turn it on the Xbox seems fine? (But no video of course) I’ve looked at the model date and it’s a 1.6b. I have a picture of the clock capacitor and to me it seems fine though I’m kinda new to this sorta thing. Can my Xbox be fixed? Is there some other issue with it? (It IS softmodded with UnleashX installed) Thank you

Hello i have all the xbox iso classes of 7,641.760gb I tried to extract them with quix and c-xbox tool but it does not extract them, I can extract the iso only with the xbox image browser, but it does extract one at a time, is there any program that extracts multiple iso at the same time? thank you

Hi everyone I've found that one of my old xbox is not working anymore when i try to boot it is making a weird sound and goes off, anyone know what could be the problem? maybe a power supply issue? The xbox should be a 1.1 with softmod not sure as was in a box for years I leave a video attached of the problem Thanks xbox_mpeg4_mpeg4.avi

Was pretty fun once I got control of the soldering

Have a couple modded xboxes from back in the day that ive been messin around with. my skills are rusty as hell. Im trying to start fresh with a splinter cell exploit but cant seem to find the game save anywhere. Can i copy the game save from an already modded box?