Search the Community

I was wondering if anyone has had any luck mixing a debug bios with a Focus based motherboard. I tried recently doing a retail to debug xbox conversion and the unit that I tried it on has the Focus video encoder and I ran into video issues as soon as I used PBL to switch to a debug bios. I have tried with both the complex 4627 BFM and also with the 5388 stock one that comes with the dev files and they produced the same result, scrambled video.. I have tried this with an xbox that has the Conexant video encoder and it seems to work though unfortunately due to some screw ups with some DVD drive testing, I have fried the DVD control/power from the PIC meaning I have to power the drive from another xbox for it to work (leave it for another topic as to what I was doing). Anyways , I was wondering if anyone knows of any workarounds for getting the debug bios to work on the Focus video encoder. I have a feeling since there arent any since all debug units to my knowledge had the Conexant video encoder, but nonetheless worth a try. Thanks

Softmodded Xbox running Unleash X - 160gb HD (Unsure of model but can retrieve if needed.) Using Startech IDE2SAT2 Converter for cloning process set on Slave 2TB WD Blue Drive WD20EZRZ Once this is cloned successfully I planned on using the Kingwin Model ADP-06 I have swapped IDE cables to the converted sata drive with the Startech Adapter and loaded into Chimp successfully Don't care about games but would like to get saves if possible (The drive is also failing) In Chimp I am cloning out C and E partitions and then selecting "G Occupys Space Beyond 137GB" (New to this so not sure if this is the right option to use.) It completes it's process and I power down the system. But am getting an Error 13 when I plug up the hard drive into the master IDE port with both the startech set as "Master" and the Kingpin on both dip switch settings Am I missing something in this process? Do I need to update my dashboard on my original xbox to make chimp compatible?

So I was wondering if this was possible. I remember MANY years ago when I was a kid fucking up my xbox dash and fixing it by transferring a softmodded E/C by Xplorer360. Would this work on a virgin xbox? To be clear: hotswap virgin xbox hdd to PC, open in xplorer 360, transplant softmodded C/E, boot xbox (should boot into unleashx). I swear I remember doing this to an xbox with a broken disk drive too. Does anyone know for a fact? It seems 10x easier than Ndure and shit. Also if anyone has a tutorial for modding an xbox with only IDE PC please let me know. thanks also if someone could upload their softmodded E/C from a PAL xbox or if it doesnt matter either. excluding emulators/games etc etc of course

Another OG xbox softmod with 1.1 MoBo. Comes with one controller, composite cable, dvd dongle and remote. Has: Unleash X (main dash) XBMC Coinops Massive SNES box with all roms Surreal64 (all roms) $125 shipped anywhere in the US

I wasn't sure whether to post this here or in repair, but since it happened during a TSOP mod I though I'd try here first. Picked up a 1.4 version at a Salvation Army today, green model worked great but filthy inside. Cleaned it up, removed clock capacitor and did the two TSOP points. Reassembled and before I even load into Hexen my video signal has lines going across the screen. After messing around I find that the problem is only with component output (hd output) and standard def av works fine. Thing is, component worked fine before I disassembled so I'm convinced the problem must have been caused by something I did - but all I did was pull the clock cap and do the 2 tsop points... Tried another component cable.. same result. Tried another tv, got a glitched looking display or 'mode not supported'. I'm convinced it's now outputting some garbled attempt at an hd signal that neither of my tvs can process correctly. Have 2 other xboxes and both display hd perfect with the same cables and tvs. I guess I can just sell it with some standard cables but losing the hd kinda kills the awesomeness so I'd really like to fix this if possible. This is like the second weird obscure xbox mystery for me in like a week, sheesh:)

I recently received an original modded Xbox. I bought a Pelican brand arcade stick to use with the 1000+ arcade games that were included. The trouble I’m having is that the system freaks out when I plug the arcade stick in. Things either freeze or games/emulators don’t load at all. It will work for a little while with the Xbox games loaded on there before freezing and it will work perfectly fine on a non modded Xbox. My only guess is that it’s because it can’t do the same control actions like on a regular controller, so maybe the system gets confused. That’s kind of a wild guess though. Anyone have this problem or any idea on what’s causing it?

Hello All I have a x3 modded v1.2 xbox that i have upgraded with a 2tb drive. I am trying to ftp games to it but after a while it will stop and give me errors like file not found using flashfxp or filezilla. I have tried with static ip and dchp also with router and direct using (crossover cable) from my pc and a laptop. The process gets to a certain point then errors, i've been trying for days with no luck. any suggestions more than welcome. Thanks

I've actually seen a few people talking about this all ready here and on facebook but just wanted to share it for those who haven't. A full tutorial on how to install a custom LCD screen in your original Xbox (NON-X3) that has a temperature monitor so you can constantly see what temp your console is running at to help prolong the lifespan and keep things cool! You can see it on my website by clicking the link below: Tutorial on how to install an LCD screen in your original Xbox console

How would you go about replacing a hdd in a dead xbox? mod chips? I've been looking for a tutorial but I can't find anything. Also, everything on the xbox seems to work, so but the hdd is just freaking out with sound, so I assume its the hdd 1.0 btw.

So hdd is upgraded to 500gb and i tried. To enable yhe hd with hexen disk once with out clearing c drive tsop flash and now ive reformated disk and cleaned and its not working right any one have advice still geting red as grayish green after all steps

So hdd is upgraded to 500gb and i tried. To enable yhe hd with hexen disk once with out clearing c drive tsop flash and now ive reformated disk and cleaned and its not working right any one have advice still geting red as grayish green after all steps

i have a used xbox that i bought just recently paid 10 dollars was softmodded with soft mod deluxe v3 and have a code 21 the sticker that says the year has been wiped clean and i cant make out anything on it if anyone can help i would appreciate it is their any way to put it back to original the xbox and the softmod it then tsop flash it back to the original xbox software

I wonder if anyone can help me with this. It seems the Xbox is crashing when accessing www.crusaders.no (which no longer exists). I've managed to turn off RSS feeds but it makes no difference. It's a real pain as I can't ftp into the xbox because it crashes before I can establish a connection. It works fine when ethernet is disconnected. Thanks for any help.

My brother has a few 3tb sata drives with some smart errors. I would like to use them in some xboxes. The drives work fine in the pc, but not for data centers anymore. How would a xbox react to these? As the are not running full days, will it go?

Ok here is the story. My brother just gave me his old xbox. It has been hard modded a while ago. It is a version 1.4 with a windbond TSOP. It is currently running Evolution x 3921. I have installed bios checker 5.0 and it says the bios is unknown. Also the MS dashboard can not be loaded. I would love to update this. What would be the order to do this. I read somewhere to run the krayzie one click soft mod installation, which would update the soft mod. Do I then just re-flash the tsop with the 256 EvoX M8+. I do have hexen 2017 disc. Thanks

Hello Folks, I try to intsall a XBIT 1.5 Chip in a 1.6b console. I was having a pretty bad time, since most of the information is gone due to forums and websites are not available in 2018 anymore... But thanks to the wayback machine, I managed to get some information about the installation process of the chip. Well, it looks like that the chip is/was only compatible to v1.0 to 1.5 and the 1.6 revision was not out when this chip was released (I've read somewhere, that there is a 1.6 adaptor board). Anyway, thanks to google, I found out that it should be possible to use that chip in a 1.6 console, but I'm unsure if they used the 1.6 adaptor. After rebuilding the LPC port, I installed the chip as usual (Double checked the pinouts from thechip and the LPC port), left d0 unconnected since I've read, that this is not necessary on 1.6 consoles and performed a LFRAME cut. I flashed evolution-x m8 1.6b bios to the chip with a virutal installation of windows xp (the softwate really sucks and won't work on WIN10...) Well, all I get is the christmas light (Console turning on and off 3 times and flashes red/green) without any video signal. If I bridge the LFRAME signal with tweezeers, the console boots as usual. This either means, that either the connection between the console and the chip is wrong or the chip is broken and I don't know how to find that out. I tried multiple thing, like reconnectnig the LFRAME, soldering in D0, used the 1.5 pinout for soldering, used the 1.6 soldering (but without the adaptor). At the time, I think the chip is broken, because flashing works, but validating the files gives me an error. As said before, I read on a german forum, that you can actually use any not 1.6 compatible chip with a 1.6 console by cutting the LFRAME and not connecting the d0 point. Won't work for me Has anyone some tips, help, suggestion for me? Thanks in advanve!

for sale is a boxed xbox which has been softmooded and had a 160gb hd put in,also have the original hd too,comes with power lead and tv lead and original controller "s" pad the xbox itself is in excellent working order and condition looking for £65 posted in uk

Bought.

By soundtracks I mean the ability to have games play the music using the custom soundtrack feature a lot of games have. I'm sure we all know how to put music on. I had this issue since I can't burn CDs. I figured there would be a way to FTP but, it isnt as simple as FTPing to the correct directory in the proper format. The information on how to do this is out there, but it did take a little while to get a working method. A lot of the programs don't work on windows 10 etc etc. Well this method using Xbox Soundtrack Editor 0.97 works great, and is easy/fast. So I just made a quick video on how to do it. Mainly just so it is easier for people to stumble across the existing information. Xbox Soundtrack Editor v0.97.zip

Here is how to unlock an Xbox hard drive with a program called Hdat2. Software link: https://www.hdat2.com/ Software is in attachment also. It is a Boot able iso. Instructions: I've done a YouTube video showing how to unlock an Xbox hard disk with HDAT2 link here for the program http://www.hdat2.com/This is a WIP, there may be some errors I will try to update the videos and instructions over time 6th April edited YouTube video9th May 2017 v60b4, new YouTube Video and updated instructionsSet up your PC with the Xbox hard disk as Master and the DVD drive as Slave.Set the BIOS to boot from DVD/CD first.When the program loads, be patient it takes a little while Type "HDAT2" at the command prompt.Select the hard disk by using the cursor keys and pressing enter.Scroll down to "Security" press enter.Scroll down to "Unlock device" press enter.Then press "I" to change from User to Master.Pressing "K" will scroll through a list of built in passwords, if you're lucky it'll be one in the list.Xboxes are usually "XBOXSCENE" or "TEAMASSEMBLY" which are near the end of the built in password list.Press "S" to set and then "Y" to confirm.NOTE: You will only get 5 attempts, and then you will have to re-boot, and start again You can also enter a password manually by pressing "P"Passwords can be entered in User mode, but you don't get the "K" option for the built in password list.If you have "zeroed" your hard drive password then 30 HEX is DECIMAL 0.Hopefully the video will show what I mean https://youtu.be/ZnvqxgTJsfoHDAT2 also has other useful hard drive tools to repair bad sectors, erase etc...Have a look at some of the other YouTube videos by other users Video Below: hdat2cd_60b5.iso

I'm not sure if this is the correct forum but here goes... What's the best way to clone a 2TB SATA Xbox HDD to another 2TB drive? I have an Inateck FD2002 that is a dual SATA USB 3.0 dock, that has an offline cloning feature, but every time I try to clone my 2TB Xbox SATA HDD using the offline cloning feature, I initiate the clone function, then it briefly starts the process, but the dock restarts itself. The USB cable is not plugged into it. Any help is appreciated. Thanks! Sent from my SM-G955U using Tapatalk

I came across this skin a little while ago and I really like the look of it, but I was hoping someone could help me with the video previews. I have them working, if you move over and click on the game preview, but in the thread below there is come code that enables you to view the previews by just pressing down on the dpad. However I have absolutely no idea where the provided code goes. Can anyone help me out please? https://www.xbmc4xbox.org.uk/forum/viewtopic.php?f=15&t=3039&start=20

Hello everyone, I just acquired a XBox with 128Mb and 1.4GHz (thanks to N64Freak in passing for his great work and availability). I am very satisfied but being used to NDure and NKPatcher to play the game in ISO format, Having a first XBox (softmod) with 2Tb and all games / homebrews in XISO format (faster FTP transfer, take less space on the hard drive ...), I will obviously want the same thing on this new console. Apparently, the bios is "x2_4983.67.bin" but I do not have a file "x2config" on C. According to your answers, I have to flash my bios with the "ind-bios 5003.67" and then put the file configuration "ind-bios.cfg" at the root of C like this: 480P=1 ; Default=0 USEUSEALLMEMORY=1 ;Use 128mb of Ram if Available Default=0 IGRLOADSDASH=1 ;Load Dashboard on IGR Default=0 IGRMODE=1 ;IGR Mode 0=off 1=compatible 2=quick Default=2 DEFAULTXBE=\Device\CDrom0\default.xbe DASH1=\Device\CdRom0\default.xbe DASH2=\Device\Harddisk0\Partition1\Apps\Patcher\Patcher.xbe DASH3=\Device\Harddisk0\Partition1\dashboard\default.xbe That's OK? Then where to find the patch? I saw in "CDROM modchip.rar" a folder "Kernel Patcher", it is this file? Where should I create it with "make_with_listing.bat"? Thank you in advance for your answers.

Hi, I have put this on the Facebook group also. I have an X2.6 chip in an old v1.0 Xbox and I was going to pull it out and put it in a different one however the PCB with the bank switches has gone missing. No idea where it is. What are my options? Ideally would like to have the full functionality and flash it again. Anyone have the switch PCB and want to part with it has anyone done their own switches for it? The ribbon cable to the non existent switch PCB is intact.

I TSOP'd one of my Xbox's (it also has a new 250 GB disk I installed) and I was "playing" with HeXEn and can't boot to a dashboard any more. My question is given good hardware and a bootable HeXEn disk, how can I do a full reset of the hard drive with a fresh install? I am new to this and would like to get to the level that what an "Out of Box" Xbox that is TSOP'd would boot up to that is comparable to a fresh install of Windows on a PC. Thanks!