Search the Community

Hey guys, new member...but not new to the scene. I have been a member over at XBMC4XBOX for years. I initially modded this box in 2010/2011-ish. I had run XBMC on it for my daughter for a number of years, with the help of the fine folks over at X4X, have updated it several times...added some SNES ROMS and had quite a bit of fun messing around with it and the scene. As it got to be a little longer in the tooth for HD streaming, and several devices that are smaller and much more powerful that can do much more, I packed it away. My son is now 15, and loves all things gaming. I would like to get this back up and running with more ROMS that he and his friends can enjoy. Several months ago, I updated the dash with Rocky5 1.17 disc, but could never get anything to boot off of it. I only got Rocky5's gray dash, and the downloader working. XBMC would boot to a red error screen, and XBMC Emustation/XBMC4Gamers would not do anything...no matter how much I tried. I posted over at XBMC4XBOX several times to get some help, but really received no answers. In the last few weeks I have found this site, and have been reading as much as I can. I got the box out today, and had forgotten that in a fit of desperation, I tried HEXEN 2018 to try to wipe the mod and start over. It still had UnleashX as the main dash, and booted right up to it. XBMC 3.5 was still in the E: folder, but still booted to the red printed error screen. When I tried to switch to it as a dashboard I couldn't get UnleashX back. I put HEXEN back in and ran through some tools and kept getting more errors. Just dug Rocky5 out again, and ran through the softmod updater. It is a stock (other than the softmod) 1.4 that I believe was warranty repaired by Microsoft at one time. I purchased it from a friend at work, and it had previously been opened up, but no mods had been done. Booted fine to stock dash with all his game saves. I had done the original mod with the Replay card and 007 with Krayzie's, I believe. It worked great, and I was constantly reading and messing with updates and dashboard appearance for it when it was in my daughter's room. I would really like to clean this thing up. Rocky5 is now updated, and I installed the XBMC4Gamers, and booted to the dash...it worked! Now that I am a little more encouraged, I want to get this as clean as possible before adding ROMS, etc... I feel all of my attempts have left junk behind, and I want it gone...Is there a utility or anything that will get my softmod to a point that it has only what it needs to run? Then I can begin again. Like a "fresh install" or "refresh"? I have old XBMC builds, and who knows what else cluttering up the disk. Or possibly a folder structure diagram that I can follow, and clean up manually? I had incorrectly assumed that the softmod updater or HEXEN would wipe everything for me, but that was not the case. I've poured through both discs and have not seen anything like this in any menus. Thanks in advance...love the site Kevin

I am disappointed with the fan mods for the Original Xbox. I tried a 60mm Noctua Fan and then an 80MM Noctua, but no matter what i do. I cannot increase the speed of the fan. The fan just stays at the same speed settings even during gameplay. And was wondering if i can increase the speed of the Noctua since they are better,quieter fans capable of pushing out more air. I tried increasing the speed through the settings and through the config settings. But it still doesn’t make a difference. My Xbox has an Open Xenium modchip with Unleash X. Did i miss something? Do i need a special adapter?

I chip modded my Xbox 20 years ago when I was in college. Not sure the type of chip but I can find out if need be. Evolution X executor rox my box load screen. Fast forward and now I have 4 kids who have resurrected the Xbox, ages 4-11. I suspect one of the kids messed up the bios but I really don't know. One day, the kids can't get into system utilities anymore and load games. Here is the screen it boots to. Not sure where to go from here to get the machine working but I can follow directions and my 11YO is as nerdy as I used to be, so I'm hoping all is not lost. Any guidance appreciated.

After 10 years of brake I bought 2 Xbox So like in the title One I bought already chip moded Xbox Xecutor2 3b pro and Avalaunch when I turn off chip I don’t know why I’m was extra softmoded Xbox when I was trying change size of the partition by mistake I formatted hard drive ( I have back up eproom) first he show me error 16 I was using second softmoded Xbox and chimp program to fix error 16 in unlock disk with original eproom copy all partition c and later lock the hardrive now I have error 21 and I was trying everything and can fix this ;( it’s any change to fix this Xbox he don’t wanna boot Hexen was trying 2018 and 2019

Im looking for some ideas to try before I look for a replacement xbox. Im not sure if i can do anything else at this point. My xbox was soft modded for some time, but I wanted to do a tsop to unlock the drive and then put in a 2.5 inch 500 gb sata drive. I did the tsop (i have a v1.5) soldered the 2 point and flashed the tsop with hexen 2021 disc. Put in my sata driver with adpater and 80 pin cable and everything was great. I started uploaded the library that i have. I also removed the supercap. I was down to my really scrached discs and was trying to see i could get good copies from them, but gave up. I picked up some new titles and went to install them and the xbox wouldnt boot. I get the evo/xbox splash screen to a blank screen with the orange led. Tried booting hexen or soft mod or game disc and nothing. I tried cleaning out the dvd drive, that didnt help. The last thing i did with the drive was watch it with the cover off. It doesnt appear to be trying to focus nor does it appear to be emitting a laser. It does move the laser head unit on the rails. But i dont think this should stop a boot to harddrive? I went back to the ide drive and the 40 pin cable and no change. I tried combinations of hooking up pc cdrom to the ide and dvd on the power. Thought maybe the dvd drive was corrupting the ide bus. Ive checked my caps and board multiple times. The only thing i was suspicious of was a pin point spot on the nvidia chip, i hope it didnt melt itself inside. So thats where im at, i think my dvd is toast and maybe the ide on the motherboard is broken.

I have Xbox moded with Aladdin XT Plus2 (I bought it moded few years ago). ODD started failing a while back (had much trouble to recognize disc and even if it did, it had trouble reading it to rip it to HDD). I eventually ignored it and started to upload games through FTP. But recently HDD started failing, it does clicking noise at startup, sometimes it doesn't start and displays error page "service required...", if it eventually starts then sometimes it works ok and sometimes it crashes during operation with HDD making those clicking noise. So, i opened my Xbox, connected HDD to one of my PC I use for older games (Core 2 Duo, WinXP, ATA connector on motherboard) and it started ok, it was seen in device manager, but disk management didn't see it. I googled around and it seems drives are ATA locked on Xbox and that is why I didn't see any partitions. So I run SMART Extended test using smartmontools and it didn't detect any errors, also SMART attributes didn't show anything unusual (I'm familiar with this since I do computer repairs). So I googled some more and it seems I could just insert another ATA HDD to Xbox and use recovery disc to prepare HDD. I had some spare Samsung 40GB so I inserted it in Xbox and I have disc labeled as "XBOX Master Installer v2 (recovery)" but I couldn't get it to work because ODD have trouble reading it. So I'm really in a pickle. Is there some alternative way to do this without replacing ODD?

$550CAD plus shipping Payment through PayPal. Selling a unique system to a new owner, I put together a great console with unique installed custom parts with a stealth switch to choose between empowering a lighted display or a dark environment while gaming. This console is carrying an Xecuter 3 signature mixed with XCM's fitted 3x hard drive bay module which allows you to switch between 3 different hard drives which contains three different dashboards. On the primary dashboard running UnleashX is themed with my signature advanced new age dynamic themes that I personally created and only available to valued supporters. In the inside of the console has dual custom LED heat sinks on the GPU and CPU branded by Vantec's rare out-of-production IceBerq 4 Pros. HardWare: v1.2 Xbox Dashboard TSOP X2 Bios Samsung DVD Drive (Rare)Xecuter 3 Jewel (Mad Modders Edition) - only one I have... (Rare)x2 Vantec IceBerq 4 Pro (CPU & GPU) - re-pasted with Arctic MX4 (Rare)Xecuter 3 (Christmas Edition) Chip - Includes bank selector on front (Rare) Xecuter solderless Xapt3r V1.0-1.5 Custom LED Rocker Switch (Powers LEDs On/Off) (Rare)XCM Xtender - Extends the Xbox hard drive capacity to 3 drives total. Custom Blue LED PCB face plate under glow bars - hooked up to rocker switch Custom Blue/Red front eject/power LED Custom Blue LED jewel PCB - hooked up to rocker switch Custom Blue LED controller ports x3 Stock 8GB Seagate Hard Drives. Software: Drive 1: UnleashX Dashboard Emulators Homebrew Applications Drive 2: User Interface Dashboard Emulators Homebrew Applications Drive 3: XDK Lancher Dashboard Console Applications Pros: Has rare hardware Custom colored boot animation Config Live 3294 with recovery (flashed to work with v1.6 xbox as well) Ability to boot 3 different drives on the same Xbox Turn LEDs on and off with a switch Cons: Some scratches or nicks on the console Xapt3r has a wire soldered to the D0 (pin broke off) - works better than before. XCM IDE cable cannot be removed from Hard Drives(will result in damage to the IDE cable) IceBerq 4 Pros are fans noisy (due to age) FYI: If console fails to boot on arrival means the pin from the Xapt3r has fallen out, the bank select button was switched in transfer or chip has come loose (you can still access the inside). Keep in mind when taking the console apart or modifying it by any means do not remove IDE cables from the hard drives, they're basically plugged in permanently. I like to keep customers up to date to know what they are buying if you have any questions please ask. Selling as is.

FOR SALE! $35 +shipping from USA. Most in very good condition, except where noted. All NTSC List of games with original jewel case and manual booklet included, except where noted: Arena Football Call of Duty Finest Hour The Chronicles of Riddick Escape from Butcher Bay Crimson Skies *Water damage to jewel cover and insert* Conflict; Desert Storm Conflict; Desert Storm (Platinum Hits) Deus Ex Invisible War Dead of Alive 3 Enter the Matrix (Platinum Hits) Goldeneye Rogue Agent Halo Hitman 2 Madden 2008 Mercenaries *Jewel plastic slightly warped* Medal of Honor Frontline Midnight Club 3 Dub Edition *Jewel plastic is very warped* Midtown Madness 3 NBA Live 2002 NCAA Football 2005 / Top Spin NCAA Football 2008 NFL Fever 2002 Project Gotham Racing *Missing booklet* Project Gotham Racing Project Gotham Racing 2 Return to Castle Wolfenstein Tides of War Splashdown *Missing booklet* Spider-Man Unreal Championship Discs only, come in Xbox disc holder: 007 Agent Under Fire Amped Arctic Thunder Circus Maximums Chariot Wars Dave Mirra Freestyle BMX Enter the Matrix ESPN Basketball Ghost Recon Hulk Lord of the Kings Return of the King Myst III Exile Oddworld Munch’s Oddysee Project Gotham Racing Project Gotham Racing Rallisport Challenge (Platinum Hits) Splinter Cell SWAT Global Strike Team Tony Hawk Pro Skater 3 Wreckless The Yakuza Missions Other: Halo 2 case and booklet with no disc Top Spin case, booklet, and disc, but disc is scratched and having issues

i have a prototype game that i want to run on my modded xbox. how do i turn it into a file that will run on it?

Are there any issues/conflicts I need to be aware of when tsoping my xbox? Ive been running a soft mod for a week or so and have a sata 500gb HDD locked with apps, games and of course a dash, XBMC4gamers. If so I can always put the original HDD in to tsop it that way but then am I good to go with putting the 500gb back and just straight booting? OR, do I need to reinstall everything? Any specific bios reccomendations? I will be using the drive as well as the HDD and on 1.4 I think. Certainly not 1.6

Hello, I recently bought a used OG that was modified by its pervious owner. It appears to be a soft mod. The Xbox first boots into the stock MS dash, but with the "Xbox Live" tab replaced with "Phoenix" Selecting it boots into the UnleashX dash. I like this setup since I think the stock dash is cool, and has a better game saves system than any of the dash big replacements. However, when I first tested it out it was fragging, and the HDD (which was replaced at some point via chimp with a 128gb one) seems to be in poor shape based on the sounds it was making. I am considering on giving it a tsop flash for the sake of keeping it alive, but It would be cool if I could keep the dash replacement. Any info on this "Phoenix" softmod and its viability as a hardmod dash replacement would be great.

https://www.amazon.com/dp/B06XFT1TPJ/?coliid=I34W0053FX96LE&colid=3BP1APT3T9SB8&psc=1&ref_=lv_ov_lig_dp_it

Hi can you bypass the DVD, I keep getting error 12. I have a DVD which is causing system to not boot. I swapped a DVD with my only working one and I was able to softmod. Can i use the faulty drive for the check.

Hey all, This might be a foolish thought, but would it be possible to create an av cable that does both component out and vga out at the same time? I ask because if it were possible, it would be a very cheap an effective way to capture gameplay from an original xbox while playing. I was looking at this diagram for av pinouts and saw how similar they already were: https://imgur.com/odRIA8b I guess the only potential issue is that pins 9 and 10 are shorted for when its VGA and are not shorted when its component? Would be curious to hear from people more knowledgeable than myself.

Hello All, I recently put a Seagate 3TB HDD in an original xbox Rev. 1.6 with Xecuter 2.6 modchip. I split the F and G drives evenly and everything installed and worked fine. I just tried the same with an identical hard drive in a xbox Rev. 1.4 with Xecuter 3 CE modchip (X3 3294 Bios) and the G-drive size doesn't display correctly. I used TruHeXEn 2021 DVD-R to format the new drive. I then used XB Partitioner on that same DVD-R to format the F and G again. I pressed "A" until the F and G were even and made sure they were 64k clusters. Formats in XB Partitioner fine and then when I check the hard disk settings while still in TruHeXEn, they both display and show the same expected size. But when I eject the DVD-R and boot off the HDD and check hard disks in dashboards, the G-Drive shows as 0MB and sometimes doesn't display at all. The F works fine though. I tried formating them @ 10 times, same thing. If I FTP in, the F-Drive shows and is writable, but the G-Drive doesn't even display as an option. Any ideas why the G-Drive is not displaying the correct size? Thank you!!!

I bought this at a Goodwill years ago and there's something unusual wrong with it. It doesn't have any scratches or paint chips. Whenever I insert it it says "You need to connect the DVD Playback Kit receiver to a controller port to watch movies. Remove the disc to continue." So I went to my local pawn shop to get the DVD Playback kit. I get a message that says. "This is an Xbox game disc. Please put it in your Xbox to start playing." I'm confused!! How do I fix this?!

Good morning friends, I installed the rocky softmod and by mistake using a partition software I deleted the x, y and z partitions, after doing that when I turn on my xbox I only get a black screen, but if it reads the original disks, try to put the xploit disk and reinstall but the screen freezes when wanting to enter the softmod, any recommendations to be able to reinstall the softmod?

HI all, I am new to mochips but I recently decided to take the plunge. I found an OpneXenium which I bought reasonably cheap on eBay (including LPC rebuild). Since I am not so good at soldering, I also bought a spare 1.6 to try my skills. To my surprise I found that it had been modded. A disconnected Duo X2 was hanging loose inside it (a white model with AMD chip). As is, the xbox boots without problem into MS dash. When the duo is connected and I start the xbox via the eject button, everrything works as intended (MS mode) When the duo is connected and I start the xbox via the on/off button, a red light flashes and the xbox enters a quick on/off cycle (drives starting then stopping). My guess is that the Duo is defective. It probably was installed to read exports (since the HDD is a 10GB model), then fried and disconnected in order to sell the xbox. But that could be good news If I can make use of the already fixed LPC. Can it be done, as the nubers of pins differ (+2 for the openxenium)? And what would I be supposed to do with the white wire (D0) that is connected to the duo? Please help! Serge

Sorry for opening another topic so soon, with the other one un-replied, I just needed to know how to properly manage the upload of roms and emulators on a hard-modded Xbox with Slayers 2.7 as default dashboard. Basically, I got a lot of roms and some good new emulators (alongside the ones which were already installed with the dashboard). Where do I put each roms (they're a lot of stuff)? Do I need to make folders like "Nintendo 64", "Nes", etc.. asking you this because there's a "Roms" folder in "F:" drive but many of the files can have the same name (as they're usually in .zip format). Do I have to place the roms in specific folder of the emulator or there's a specific setting to follow ? Should emulators be uploaded in "Emulators" or "Games" folders ? thanks

after a very very long absence from the xbox i would like to bring it back to life and hope to find some support and news here about how things are going in the xbox scene right now. Marco

I'm thinking the Ind Bios 5003-5004 as they also have support for 128mb ram

What is the average temperature of a modded Xbox (at boot and after playing for 1 hour, just an example ) ? Does the temperature get higher if games are played from HD or discs ? What to do if it's too high / how to change the fan settings to reduce the temperature (in Slayers 1.7 or other dashboards like XMBC or Unleash, etc...) ? Is there any other setting to check in order to keep the temperature stable or lowest as possible?

I'm running into an issue where just the following 4 NTSC USA games won't load on original firmware from retail disc (get stuck at the Xbox logo + Microsoft text after putting in the disc), or from hard disk via ISO or extracted files (just go to a black screen where even IGR won't work): Chicken Little Shellshock: Nam '67 Without Warning The Suffering: Ties That Bind I'm positive that these are good discs (used for the tests I've run on original firmware) and ISOs that I've ripped / converted myself and validated against Redump hashes (for the ISO loading failures). Full details on the setup and things I've tested follow: I've got an NTSC 1.2 Xbox, upgraded to a 2TB drive, using the recommended ~937 GB F/G configuration with 64 KB clusters on those partitions, on a StarTech adapter. The drive has been locked, so I can still use stock firmware. Clock capacitor has been removed (and clock time set), and the 5 largest capacitors (3 for CPU / GPU and the two large ones on the lower left / right of the board) have been replaced. An original Xenium chip is installed on firmware 2.3.1, with banks flashed for both EvoX M8+ (modded with EvoTool to add LBA48 support), and iND 5003 (the recent modified version with re-enabled XBL and reboot fix). Using 480i composite video out. The Language is set correctly in the MS dashboard to English, which should work with these 4 games. I've got the proper files in place to allow ISO mounting, and all my games are installed via this process: Dump disc with a Kreon firmware SH-D163B drive to full ISO Validate the CRC matches the Redump CRC (so I'm sure I have a known good dump and the disc isn't the problem) Extract the files from the Redump format ISO with Xbox Image Browser 2.9 build 0350 Use Qwix to turn the extracted files back into an XISO compatible for hard drive loading Split the XISO, if over 4GB, at 4292870144 bytes into two pieces, and name them gamename.1.iso / gamename.2.iso Throw the ISO into F or G, and run the XBMC4Gamers ISO prep script to put them into a unique subfolder, as well as extract the thumbnail and game name and put them into the launcher XBE that actually mounts the disc files and plays them. This gives me 2 ways to launch my games: I can either launch the ISO from XBMC4Gamers, or I can boot into the Xenium menu with the eject button, choose to launch the stock TSOP, boot into the original dashboard, then put the original disc in and play without any mods whatsoever. I have hundreds of games working perfectly this way, but those 4 games won't boot on this Xbox, no matter what I do. If I try to launch them through the ISO loading method from XBMC4Gamers the screen just goes black, then stays black indefinitely. IGR no longer works, and I have to hard power down the Xbox. (The same thing is true if I extract the files to F:\games and try to run the default.xbe.) If I try to launch them by booting into the original firmware on TSOP, waiting for the original dashboard to load, then putting the original disc in the tray, the Xbox changes to the Xbox logo screen, with "Microsoft" below the Xbox logo (aka "I've recognized a legit game and I'm loading it"), and then just stays on that screen forever, without actually starting the game. The only thing that will break out of that is ejecting the disc, which takes me back to the dashboard, or powering off. I've tried clearing the cache drives before loading these. I've also tried deleting the TDATA and UDATA for those games (as well as backing up all of E and wiping it clean). This has me stumped, because: I know the discs are good (dumping with a Kreon matches 100% to the Redump ISO as validated by hashes, plus 3 of the 4 look factory new) I know the disc drive can read games fine, as it can load any other original disc I throw at This doesn't appear to be a copy protection thing, because it happens equally when running EvoX M8+ / iND 5003 and loading an ISO or with stock firmware and loading the original disc, and when loading the original disc, we don't even get past the point where the Xbox logo / Microsoft text beneath it leave the screen to hand control over to the game. I know the Xbox is reading the disc, because if I boot into modded, rename E:\TDATA and E:\UDATA to E:\TDATAold and E:\UDATAold, clear cache drives, then shutdown, boot into stock firmware, put the disc in, let the system hang at the Xbox / Microsoft logo, eject the disc to return to the MS dashboard, and then check the Memory tab, the only entry there (as expected) is the one entry for the game I tried to boot, with its correct picture. I can't find any reports on the restored xboxscene forums, here, or reddit claiming that those games had issues booting for anyone else (though they're niche titles, so maybe no one has tried and bothered to post they don't work?), or any sort of Wikipedia article or the like talking about the games with a section mentioning they have issues loading on certain versions of Xboxes, etc. So in lack of that, it makes me think they should work and there's something else I'm missing. Any thoughts as to why these and just these 4 games don't work, either through ISO loading, extraction to hard disk, or known good retail disk on retail firmware would be really appreciated - I'm stumped!

Hi peeps, I have just uploaded what i think is a complete pack of OG Xbox dlc and tu's to back-ups.me. It was the only place i could upload to without having to wait ages for an initial upload. Th whole pack is just over 3 gigs rar'd Hopefully someone can grab it and upload elsewhere so non members can grab it too. Its currently being seeded from my seedbox so speed should be good

It was a long time ago that I played this game (when I was around 7) so sorry if I can't recall the details or much of the information I'm about to give. Basically there's this 3rd person shooter for the OG Xbox that is very similar to Conker: live and reloaded or Fur Fighters but it's a bit more brighter and colorful. The characters were chibi-like and the gameplay was a team deathmatch and you could play in various maps; the couple I can remember were in a bathroom and the players were very small, another one was in like a circus but for this one I'm not very sure. Thanks for helping and I'm looking forward to the responses.