Jump to content
Swirlygiver

Ftp With Ind5004 Bios

Recommended Posts

Simple switch back to the X2-5053 bios.

 

Cheers

SS Dave

 

Those that can Hard-Mod. Those that can't Soft-Mod.

Share this post


Link to post
Share on other sites
13 hours ago, Swirlygiver said:

I recently switched to ind5004 from x2-5035.  Seems like since I switched, I have a harder time when I ftp.  Is there settings I should look at?  If so, how?

What's it do different after switching the BIOS?

What error or errors are you seeing?

Do you have FileZilla or your FTP client set to upload only 1 file at a time?

Share this post


Link to post
Share on other sites

I use FileZilla, it’s set to 4 at a time, while the xbox was set to 5 (while using x2-5035.). I don’t know where to set anything in Ind5004.  I should take note of what I see in FileZilla, there are some errors, but it still works.  It seems to lose connection an re-connect a lot.  

Share this post


Link to post
Share on other sites
1 minute ago, Swirlygiver said:

Will both ind5004 and x2-5035 support 128 mb ram?  I plan to upgrade. 

I found this at some point: Please login or register to see this link.

It seems both do support it.. By looking at that list.

Share this post


Link to post
Share on other sites

Appreciate the info. Thanks. 
 

It says: “Easy configuration via .cfg file. Can also be edited or created with iND-BiOS Config App.”  Any idea where I find that?   Never mind.  Found it in another thread.

Edited by Swirlygiver

Share this post


Link to post
Share on other sites
16 minutes ago, Swirlygiver said:

Appreciate the info. Thanks. 
 

It says: “Easy configuration via .cfg file. Can also be edited or created with iND-BiOS Config App.”  Any idea where I find that?

I've not tested this myself.. As I've just flashed my TSOP for the first time.. Today.. ;) 

I found this post:

and here:

 

 

 

 

 

Share this post


Link to post
Share on other sites
12 hours ago, Swirlygiver said:

I use FileZilla, it’s set to 4 at a time, while the xbox was set to 5 (while using x2-5035.). I don’t know where to set anything in Ind5004.  I should take note of what I see in FileZilla, there are some errors, but it still works.  It seems to lose connection an re-connect a lot.  

The number of connections is set in the replacement dashboard.  Which BIOS you use should not have any affect.  There's no setting in the X2 5035 BIOS that changes the supported number of simultaneous connections.  

Did you change dashboards after the BIOS change?

In FileZilla, set the max number of simultaneous connections to 1 - eliminates any problems with FTPing to the Xbox.

Share this post


Link to post
Share on other sites
15 hours ago, KaosEngineer said:

Did you change dashboards after the BIOS change?

In FileZilla, set the max number of simultaneous connections to 1 - eliminates any problems with FTPing to the Xbox.

No, I I flashed the bios after changing dashboards. It didn’t seem to matter.  
 

The FTP problems were only the first time after changing bios.  And now, when I try the one directory in XBMC4gamers as I mention in the other thread.  But it’s only that directory. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By k0mpresd
      aladdin xt chips.
      flashed to support 1mb 49lf080a chips.
      currently programmed with x2 5035 512kb bios (2* banks with same bios). can be changed at buyer request.   $25 posted to usa. international available. Please login or register to see this attachment.
    • By Pasimys
      Hello,
      i change my hdd drive to bigger 1tb drive and after succesful cloning i tried to format the new drive with XBpartitioner 1.3 and it complained about "LBA48 info not found! etc..(pic bellow) i tried to flash new bios with hexen 2018 but then that complained about "flash not writeable". i wonderd that do i need to get somewhere the newest bios and put it directly to my modchip via usb cable. our am i missing some step in this setup?  
      Please login or register to see this attachment.
      Please login or register to see this attachment.
    • By Keith01
      Purchased a Xbox V 1.0 that has the Xecuter X3 mod chip, unit wouldn't even boot at time i received it ( sorry been otta this for like forever and just getting back into it ). After numerous trials and errors i finally got it to boot up, switch configuration on front. Anyways seems like its missing the backup that should be on the mod chip itself, doesn't seem to matter what i try cannot find it, other problem is it only stays on maybe 45 mins and shuts down, i think its a power supply issue, going to try another power supply this weekend since i do have a good replacement for this version. Other issues is cannot turn unit on with power button, only with the eject button, also another weird issue is when its first plugged in it comes on without touching any button on the front, lots of strange issues going on here, maybe someone may have a bit of insight to help resolve these problems. First thing i did was remove clock cap, had leaked a little but not bad at all, area around it got a very good cleaning and looks great

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.