naits

For sure... Those are about to blow

This is now solved... I just didn't actually "write" to the partition when I tried to completely delete it.. After I did that and re enabled the partition and formated it again, it shows up as 469Gb.

It was first softmoded with Rocky5's xbox-softmodding-tool, and also now running BIOS ind 5004.67

Both F & G is enabled. Also XBpartition:

Hello, I've just upgraded my hard drive. Added a 80-wire 40 pin and with a pata to sata adapter. It cloned just fine. I selected selective partition (C,e,f and g) as it stated G would take the rest of the space. It's a 500Gb hard drive. But.. It says partition G is 0Gb available.. And F is at 120Gb. But XBpartitioner 1.3 sees G at around 300Gb. So why isn't it available for me to use? But really F can take it all correct? So no need for G..? Okay, I disabled partition G and filled partition F with all it can have(it said 400Gb ish) and I wrote that to the disk with XBpartitioner 1.3. And now it says it only has 246Gb... Where did the rest go... I'm lost UPDATE: okay... UnleashX shows me under storage menu that is "sees" 469Gb ish.. But only available 246Gb... But the partition is empty??? Anyone got a clue?

Thank you or the link It was already installed when I opened my old Xbox. So I am good Just finished removed clock cap and cleaned the mobo a bit. It fired up nice. Currently backing up its hard drive. It's most likely never been turned on in like 10 years or so... Its sad that all the info from that website is almost gone....

Hello guys! I just dug through every single corner of my parents basement.. With success I found my first ogXbox! That I remember my dad knew someone who modded those. I also remember it was of course. Tons of installed games But my question, what modchip is this? I can't really remember what it was... And I can't turn it on yet.... Have to remove clock cap, cleaning and so on. So now I've got my first OGXbox and my new OGXbox Some pictures: (https://photos.app.goo.gl/ouR38ZZmJor4v6PK6)

Works fine for me

Hello, whenever I try to manually scan the emulator mame with XBOX emustation I am getting this error. But I can't find "autload.xbe" anywhere.... Anyone have some info about this?

I've managed to get the Black Screen away, and some games worked at some point.. But now nothing(Haven't changed any settings since then) it just goes back to the home screen. And every rom is from "EWJ 212 Standalone" Here look:

Yea, it definitely will! Thank you. And yes I will

Ahh I see!! I changed DASH1 from: DASH1=\Device\Harddisk0\Partition2\evoxdash.xbe to: DASH1=\Device\Harddisk0\Partition1\Apps\XBMC\default.xbe In a file named ind-bios.cfg And it worked flawlessly! Thanks.

Np man, I am out of ideas for now.. I will post back if I find something related to this. Good luck!

Okay, this is defiantly weird.. I googled around a bit. I found this: https://www.xbmc4xbox.org.uk/forum/viewtopic.php?t=953 But I am unsure if that will help. But worth a look I guess. I am in the process of making XBMC my main dashboard too.. So I hope I don't run into any kind of issues like this..............

Ahh okay, well I guess I am making a slayers disk then But yea XMBC4Gamers, I have it as an app right now.. But I would like it to boot that as default, but I am not sure how to change that at the moment.. So I am looking into that And it's currently downloading MAME emulator, so I gotto wait for that...

Thank you And thank you for that link! Now it just became a lot easier -------------------------------------------Versions 1.2 to 1.5-------------------------------------------Mobo Caps:13x 25v 22uf Nichicon VR7x 25v 100uf Nichicon VR3x 6.3v 3300uf Nichicon HM2x 10v 3300uf Nichicon PW1x 16v 680uf Nichicon PW3x 6.3v 1500uf Nichicon HD (Solid)1x 1F 2.5v SuperStor!SMD Caps:1x 16v 47uf5x 16v 10uf(Delta) PSU Caps:1x 400v 150uf Rubycon USR3x 50v 0.22uf Taicon?2x 25v 100uf Taicon?1x 25v 47uf Taicon?3x 10v 2200uf Ltec (Blue/Green)1x 16v 1000uf Ltec (Blue/Green)RAM:SamsungK4D263238D-QC50 (v1.2-1.3)K4D263238F-QC50 (v1.4-1.5)-------------------------------------------Version 1.6-------------------------------------------Mobo Caps:11x 25v 22uf Nichicon VR3x 25v 100uf Nichicon VR3x 6.3v 1500uf Rubycon ZL (Wet)5x 6.3v 3300uf Rubycon MBZSMD Caps:1x 16v 47uf3x 16v 10uf(Delta) PSU Caps:3x 50v 1uf CapXon?1x 50v 0.47uf CapXon?1x 50v 10uf CapXon?1x 50v 22uf CapXon?1x 10v 2200uf CapXon?1x 25v 470uf CapXon?1x 10v 3300uf CapXon?2x 200v 330uf CapXon?

Hehe, yea after I used it the dashboard changed a bit.. But for now it's fine by me. But I've seen some nice ones here and there.. Do you recommend any specific ones?

Thank you I guess I could just look at the caps, the next time I have my Xbox open... To see the details of what they are.. So I/we can just get replacements that way. Just found this site: https://no.farnell.com/c/passive-components/capacitors

Are you using FTP while the Xbox is on the fatal error image? if so, try to run Rocky5s extra disc and then FTP into the Xbox.

Hehe, Heisann ja. Yes on the 1.6 it's a different story Ahh I haven't thought about doing that.. That might be something I could do to mine as well. I've got a 1.4 Xbox. Any possibility you might send me a link to the set of caps you bought?

Norway here as well! Just got hold on a xbox last week. So far I've softmoded and flashed my TSOP. Only waiting for 80-pin ribbon cable and a sata adapter. You going to replace the clock cap? It's okay to just remove it. If you plan to softmod it will receive the time from the internet anyway. I owned an og xbox when it first came out as well. But suddenly a couple of weeks ago, i got the urge to get one and turn it into a EMULATION box. And greetings to you!

I've not tested this myself.. As I've just flashed my TSOP for the first time.. Today.. I found this post: and here:

I found this at some point: https://www.reddit.com/r/originalxbox/wiki/bios/features It seems both do support it.. By looking at that list.

I've have now been successfully flashed! I ended up using Hexen 2018.. I didn't get xblast to boot for whatever reason. I chose the ind bios 5004.67 from the menu within hexen for the winbond tsop. And it worked. Thanks again.

Awesome! Thank you! I've downloaded those files now. And I will be doing the solder during today, and I will try to flash it Really, thanks!