I’m still getting to grips with using the og Xbox in 2020, well setting it up.
I’ve got a USB powered WiFi bridge that plugs into the Ethernet port, and is powered directly from the console.
But the console starts up quicker than the the bridge can connect.
Is there an option I’m missing that will force XBMC4Gamers to check the network again and then it’ll get an IP address?
So I got Slayer 2.7 properly running on a DVD-R, but I don't know where to start from .
I know some options can ruin the HDD or the XBox so I would need to know what is the correct installation procedure. I have a 120Gb HDD (a compatible Maxtor, according to this list Please login or register to see this link. that is connected instead of the previous one (that works fine with Evox already running), but I literally don't know what to do once the functions list of the installer appears on screen. For example, I don't know about Kernel compatibility, if the HDD is to be considered as RETAIL or UPGRADE/BIG HD, etc.
I'm not completely sure, but I think my consolle is Hard Modded, because I've read somewhere that if the seals have holes around the screws or if the screen flickers a bit then it means it's a hard mode, but again I'm not sure. I don't really want to touch the internal part of the console more than the necessary to check it out (I've been told the modchip is visible somewhere), honestly.
Any suggestion from somebody who already installed it?
Board Life Status
Board startup date: April 23, 2017 12:45:48