Bbsan

Considering the distortions are really only related to the ripple in the 5V - is each 5V on the Mainboard equally bad? For example I guess the 5V of the Controller board should be more or less ripple-free, right?

Also, are there maybe other 5V points on the mainboard that are more stable? it seems that next to the ETH connector there is a resistor labeled 6R2 which also has 5V

Would using some capacitors for filtering resolve this? I‘ve seen other systems were exactly this was done to resolve this kind of issues....

I‘m currently trying to resolve the same issues - regarding vertical/diagonal lines on an internal install. It seems that @Zpidelius got around this somehow with this MS9288A chip - so I‘m curious how exactly you managed to do so... Did you remove the 75k resistors on the Wii2HDMI board? I removed the AV port completely and directly soldered to the socket of it...

Anyone beside me experiencing issues when installing the Fanart pack? Each time I try, the download takes forever and once finished freezes while extracting... One time extraction started successful but I needed to shutdown the Xbox, so maybe this messed sth up?

Hey guys, just to make sure I‘m not heading into the wrong direction: Is the purpose of this adapter to use the 8164B without a FW flash or only to provide an all in one PCB for the generic wiring mod?

Hey Guys, Awesome project! I just ordered the PCBs from JLC and now I'm trying to get the parts... Any idea if there's another socket that can be used instead of SM10B-SRSS-TB (J1)? Even on AliExpress they are as expensive as the CPLD itself. Also - which Programmer to get best that is not too expensive?

Any update on this topic? @N64 freak This install and the PCB itself looks so clean, its‘s gorgeous!!! Do you have any kind of documentation or schematics for this? Unfortunately I‘m not good enough with SMD soldering, but it would be so great to put together a batch order in China or anywhere else. On reddit some people do the same for UltraHdMI. any thoughts on this?