Search the Community

Selling x3 chips and xlcd brand new mod chips are used

Re-listed due to time waster. https://www.ebay.co.uk/itm/Xecuter-3-CE-Modchip/223547347458?hash=item340c75d202:g:8hwAAOSwCLxc8~oE

Hello everyone and thank you for taking the time to read my post,requesting urgent help with regards my.Xecuter X2.6CE modchip. As you can see in the photo i've uploaded.The red 5v socket is damaged (it was like this when i was given the chip,many years ago with the front switch board and chip to switch board cable BUT their wasn't the red 5v wire included).The socket's plastic has been damaged and it's missing it's 2 tiny pins.The 2 solder pads are still there though and i have tried soldering on a peice of wire to go from the solder pad on the chip to the 5v point on my V1.6 Xbox. No luck what so ever,even though i have tried the wire on both pads (one by one and not bridged together of course) When i power up my console,it will quickly power on then switch off,then again quickly switch on,then switch off.It does this 3 times then it'll stay on with a black screen and the front RF boards LED's flashing from red to green,red to green (Fragging i think it's known as) Please can anyone help me as to where i need to solder the piece of wire on the chip so i can use the chip in my V1.6 Xbox ? Thanks so much guys,any help from you would be truely apprieciated indeed.

https://www.ebay.co.uk/itm/Xecuter-3-CE-Modchip/223538636713?hash=item340bf0e7a9:g:8hwAAOSwCLxc8~oE

Hellow OG Xbox community, creating this topic as a place to discuss installation, operation and modding of an Xecuter 3 CE Red-backed modchip with LCD, for help and questions, I am in no way an expert, but a very knowledgeable technician who is interested in helping others to use, repair or mod their systems. Lets share knowledge!!

Hi, I upgraded my xbox to a 1TB sata drive but I can only see 123gb. I understand I need to update the bios on the modchip I have which I believe is an Xecuter 2.3 lite. I tried using Hexen to upgrade to x2.4981 but I get the message !!Flash Not Writeable!! This happens if I have the switch set to protect or unprotect, Bank 1 or Bank 2. I downloaded a copy of x2.5035 so I could go with that version outside of Hexen, but I don't know how to do that. Please could someone assist me. Thank you.

Ok guys got an issue that is getting on my wick. Slapped a 2.3b Lite into a 1.6, used a clone LPC Rebuild Kit and proceeded to boot the console. D0 was connected to the board and ground was connected to the screw hole as usual. As soon as you put power to the console it will boot up then reset 2 times before FRAGGING. Only when D0 is connected and chip is off. With chip on with M8 1.6 Bios I can get a boot with Evo shield but it hangs after that and still turns on as soon as a power cord is plugged in. Front panel doesn't work at all. Remove the chip or D0, and it'll boot fine to the original softmod it came from. I've reworked it with my iron, even given it a hot air rework. Which point is most likely the culprit? Apologies on the lead free solder. Was using a friends over my own.

Hi guys I have an xbox with xecuter 3 and pro switch.. If anyone would like to make an offer

Hi, I've got an xecuter X3IR installed and its all working but I have got a problem I cant seem to figure out? When X3IR is enabled the light around the power button changes colour, one side is red and one side is green? How do I get it to go back to just be green? Ive connect it up to X3 IR manager but there isn't a setting for changing the power button LED colour or am I missing something? Or is this just a feature to tell you X3IR is enabled? If I unplug the X3IR the light goes back to green both sides so it defiantly something to do with the X3IR. Any help would be much appriciated Cheers

EDIT: Never mind the chip wire on the bank came loss . lol All sorted

I’m looking for a halo green pro switch

Selling on ebay to make it fair on UK buyers. I really want this to go to a good home, I am only selling as I am moving house and need the money towards fees otherwise I would have kept it eternally haha. Thanks for taking the time to look. https://www.ebay.co.uk/itm/Very-Rare-Team-Xecuter-Original-Xbox-With-TX-Faceplate-128mb-Ram-X3ce-Xapt3r/113716250636

Hi guys hope it helps those who have a broken/missing usb ports on the x3cp v1.0 needed a few minor dimensional changes to fit snugly in the stock x3cp usb board slide slots i had to shave off 1-2mm from the sides of the pcb for it to seat properly and not damage the housing. these files are v1.1 and the required changes have been made i recommend 1.00mm-1.6mm board thickness any questions feel free to ask https://mega.nz/#!LkNAFYSJ!SDPPguhC64fcmEvT2RkIuT_xdSYkedqKGIfJJlUAJQA

Looking for a black x3 control switch or any color

This may sound weird and maybe it is but can I softmod or better should I softmod with the xecuter hardmod installed? I heard modern softmods are better.

Custom Red LED controller Ports with matching Red LED Power/Eject Board. Comes with lifetime warranty. If one ever fails I will replace it for free minus the shipping cost. These are very bright and match 100% although the picture kinda takes away from how deep red these really are. $24.99 Shipped anywhere in the lower 48. Can ship worldwide. Other colors available: Blue, Green, White, Purple, Orange, Red Any questions, simply shoot me a message! Thanks guys!

A friend gave me back the xbox I made for him years ago. I want to update it for my grankids. It is chipped with an xecuter 2, is a version 1.6, and currently has an ancient 150GB hdd. Primarily, I want to put in a new HDD, planning on a 500GB, and use a Startech SATA/IDE adapter with an 80 wire cable. Then I want to add Coinops, and XBMC; the XBMC primarily for karaoke. Also a decent dash, thinking probably the last UnleashX. I have copied all the contents onto a drive via ftp. I am confused as to how to 1) install the new hdd and 2) how to install the dash/apps. From what I read on the wiki and elsewhere, supposedly, I can just install the drive, boot, and the xecuter wizard should walk me through formatting the drive. I assume that then I can put in the Hexen disk and it will install the dash's. Is this right? My xbox modding days are long behind me (even the 360 mod days, lol). Any help is appreciated.

Is anyone interested in helping us modders out I contacted xecuter about the xecuter 3 mod chip and they said they could sell the mod chip again if somone wanted to buy 5,000 or more mod chips they said the project would cost 30,000 dollars at least but at least we know we can still get them if anyone would want to help out on this project just send a message to me.

I have a board I wanted to get out there in the scene but right now I’m getting out of the Xbox scene so I’m just dumping all my board deigns - OXControllr is a baord that slips into the controller port and gives you full usb and a power button if you have done the power button mod OXControllr v2.zip 31BDF9E9-7C05-471B-AC92-47031FF3A7F3.MOV

Hello everyone! I recently picked up a box with Xkiller Xecuter 2 and while trying to make a USB cord for it, I somehow fried the circuitry for port 2. I had another box for spare parts and tried swapping the headers, no luck. My real questions are A: Do they make controller hubs (like a 2 or 4 way splitter) that I can just plug into port 1 so that I can still have a 2nd controller detected? I've searched everywhere and couldn't find one and if not B: Can I just splice the wires (on the internal plug) that go to port 2 on to the wires for port 1 and still have it see the second controller when plugged? I'm thinking so since it is just a USB interface... But I would love some input before I try.

Hello hi I'm looking to buy a 4 by 20 executor 3 LCD screen just the screen and bezel only. I have the chip already installed in my main go to Xbox and is running excellent. I'm just looking for a working screen that is known working .. with the connection that will connect directly into the chip without soldering. I am well aware that the screens are a little difficult to get your hards on... but I did find some on eBay they just did not have the specific end that plugs into the mod chip. If all else fails I will have to buy one of these and solder them directly to the chip. But by doing that I am seriously lowering the value of the chip in the future. I would like to purchase or trade for this X3 lcd screen with bezel and connection to the original X3 chip.. If you have an extra screen and you would like it to go to a good home I'm your guy. I live in Canada I am PayPal ready and I also have a lot of cool stuff for trade Xbox related.. Please contact me through this site. and we can discuss where we are going from here.. Thank you very much for reading this I hope somebody has this part for me. Attached is a picture of the Xbox I would love to add the screen to.. Thanks again Frank

Looking for a X3 LCD front panel. What's out there? Message me if you have one available. I do have some trades available and paypal. Located in New Hampshire, United States.

Limited Edition Mountain Dew Xbox [1 of 5000] Never been opened or modded. 100% unmolested. Stickers still intact. Overall in great condition. Includes 1 power cable and one A/V Cable. Located in New Hampshire . Asking: $229.99 + Shipping to the lower 48. Will ship to Canada and Europe just message me.

xbox blue ghostcase blue x3 control panel xecuter 3ce 320gb harddrive coinops ninja massive 71 xbox games 2 controllers in perfect condition inc all kabels books dont now what to ask, i am from the netherlands. but shipping is possible after i searched what the costs are.

Team Xecuter _ Xecuter 2.3B Lite Plus Install.pdf