Search the Community

Hi All What would a unopened Xbox meaning the carton is unopened so New In Box be worth ?

I had some time inbetwen jobs and thought I would have a go at one of my cheap pickup's. I got 3 for $20 from the local recycle center with the real reason for buying them was 2 of them had Duo X2 mod chips. But anyway can you have too many XBOX"S ? I think not. As you can see it's in poor condition. So after opening it up. And removal of the PCB and Faraday cage. Looks like it's been swimming or at least stored out side. Even the DVD drive got stripped the lazer pickup was covered in a brown film that took several goes to clean off add a new load belt with some lube on the moving part's it's now as good as new. I am suprised the fan could spin. I washed the mother board and power supply in a ultrasonic bath then a scrub with isoprenol alcohol and a brush then I hot air dryed them. And the cases when't in the dish washer on a heavy duty cycle wash. The faraday cage got washed sanded and then a coat of black paint Now a reasemble with new heat sink compound It's up and running now lets fit one of N64's HDMI kits. For the time been the DuoX2 chip is staying but I will flash the TSOP in the near future as well as thinking a RAM upgrade is in order. It's back together for now with a 500gig hard disk. And yes it is the same XBOX all up about 2 1/2 hours work not including the dish washer taking 1.5 hours. I still have another one just as bad plus at least 6 more that are in better condition for when I get time. Cheers all SS Dave The 500gig hard drive has gone and now a 1tb drive in it's place.

Just a simple dark theme take on Rocky5's XST theme, since it was my favorite theme aside from the fact that it burned my retinas at night. Obviously huge props to R5 since this is his theme, just with dark colors and tweaked panels to suit my console (you may have to go in and change them if they're not working/to your liking, obviously). Rocky5 XST but wait, now dark

I'm after a little help with this. Do you folks have a GOOD link to a Video on exactly how to install a 2TB drive reliably? I'm struggling to figure out the best reliable method on how to do this... Setting up partitions, with what apps etc.. I installed a 500GB IDE in my xbox but it's been nothing but trouble. so I obviously didnt do it the correct way Any help, advice, links or even better for the forum, a post with details, application downloads and images for a walk through. Thanks very much in advance!!

Hope all are well, Appreciate finding this forum as i recently found my V1.0 original Xbox and have quickly descended into a rabbit hole. I will be here for a while, just got 3 more OGs from coworkers. What a project! Thanks to the mods for setting this up!

Hello, I recently decided to mess with my recently purchase Xbox 360 development kit and i am having some trouble. I would like to get it set up to Xbox neighborhood and play debug games on it but Xbox neighborhood cant seem to find my system. If possible, could some one walk me through how to set up Xbox neighborhood, how to use it, and finally how to load debug games to it. just to clarify, my system is not a JTAG or RGH, it is an official dev kit so i dont know if the process between the two is much different. Any help will be greatly appreciated. Thanks Aidan

I have some OG Xbox DLC I want to install through FTP, where exactly would I put it? I am thinking opening the file for the game and dumping it in there, but that doesn't seem like it would work. Much appreciated!

Hi I have a PAL 1.6 xbox that I've recently rebuilt the LPC, added a Aladdin xt+2 modchip to and upgraded the hard drive with a larger 2tb. the system runs fine in SD via the standard AV cable (RED/WHITE/YELLOW lead) once I switch the console over to NTSC video settings and reboot the console with a component lead it switches to 1080i or 720p fine but will randomly reboot. Has anybody come across this before and know a fix? Thanks in advance

i am trying to figure out how do i change the models and stages in soulcalibur 2 xbox if anyone knows how to do it please help me Example: https://www.youtube.com/watch?v=1UAFxYAU5-Y

Hello everybody , I just tsop my first Xbox works great but its 8 gig Any tips on how to format my 500 gig drive that came from a old hard modded system, If I just drop it in I get a error code 7. so I dropped in hexen 2019 and turned off the system and rebooted got evox and then it just stayed there and did nothing any tips or video you know about? Thanks K9

please help me i have an error 13 on my xbox and i was wondering if can use a halo 2 iso burnt on a DVD to fix it

Hi! Is there an app for windows that allows extracting multiple ISO redumps for og Xbox? Note that I mean ISO, not xiso, regular extracting apps doesn't work bc those ISO files have more than one layer. I've only managed to extract single file at once, I have a lot of those redumps and it takes a lot of time to extract them.

Hi all, when moving house I found my old pride and joy modded xbox. Big hdd, xecuter 3 chip and lcd screen. I fired it up and after blowing of the cobwebs it still looks great.

I have (purchased from a friend) a x3ce modded Xbox that boots into XBMC and it has a 2tb HDD installed. He has about 330 Xbox games in folders on the G partition, and it's running out of room. I have another 300+ games that I would like to install to F and just wanted to see what needed to be done to get all the games from F and G to show when I click the "Games" tab. Is the a CFG file I need to edit in XMBC or am I stuck with 2 separate sources (Games and Games 2)? I hope I explained that well enough. Thanks in adavance.

Hi Found this site thank goodness .Just purchased a newly modded box am looking obviously for info regarding the loading of games onto drive via ftp

I have a 3 original xbox consoles. They all work and I love my xbox consoles. The issue that I have is one of them says it is modded with the SmartXX mod chip via a sticker on the outside of the xbox. When I attempt to turn on the xbox, I see what I believe to be a linux version of software installed on it and this doesn't have a lcd or anything else installed on it. I could open it up to see what version of the mod chip is installed on it. But prior to doing that, I have a few questions. Is this xbox no longer usable as a regular xbox? Is there a way to enable the standard mode for the xbox. Without a keyboard that can plug into this, how am I even supposed to use this xbox? Where do you find a keyboard that can plug into the modded xbox, as the controller port is different than usb, etc. Does anyone have the documentation for one of these mod chips? That could help me understand what this does?

Evening, guys. Xbox 1.0 chipmod. I was transferring ninja missives via ftp. Once the transfer is complete the console is restarted, instead of the Dashboard Unleashx well set by me, I find the same dash but as if it had just been installed (no hd, all the menu in English etc etc). The strange thing is that all applications and programs and emulators are not displayed, despite being in their respective partitions and folders. Another thing that happens now is that using XBMC4GAMERS, when I log in to my account, trying to load the games hangs in the loading. Loading evolutionx, the same thing, I don't see any more programs and emulators. Hdd 1tb Dash unleashx in f: Shortly before I had no problem. Help

Good evening, guys, I need help. Xbox Crystal with aladdin modchip I have a 640 gb wd blue hdd. By inserting the dvd to prepare the hdd and install everything, the partitions are always at zero (see photo). In another xbox always modchip, the partitions are seen, but if I insert or copy some files, at restart they disappear as in the xbox crystal. Partition C 0, Partition F:0, Partirion E:0 HELP!

Hi i'd like to know if there's a way to play virtual cop or house of the dead 1 with my saturn emulator i can't find any way to convert my iso files and even download a.mdf and .mds fils that doesnt work when i make a FTP transfert. I've got a softmodded xbox with unleash

Hi everyone, I am new, and I was searching a forum of xbox modders. I was wandering if I could put two hard disks in my xbox, and I found an adapter that I buyed long time ago, called xdhddxx. Does anyone knows how it works and how I should connect it? I can barely find information on google. I only discovered that it is an ide doubler, and that if you turn on the xbox with the dvd button it boots the first drive, if you turn the xbox with the power button it boots with the other. Sorry for my English and thanks for any info Here are the photos

Glad to see that there are still active modding communities. I was given an Xbox many years ago and finally decided to see what it's capable of. In the past couple days, I was able to find out what revision board I have, what points to solder to make the TSOP writable, common issues to look out for, and how to softmod with only an IDE cable and computer. I have never experienced an Xbox before this week, but it seems quite capable. I also made my own component cables with advice I found here. I'm very impressed with the community and the xbox. I have not been able to work for a couple months so this has given me something that i can do to occupy time. Please let me know if anyone has suggestions for other ways I can mod the console for cheap or free.

I have a 1.0 and a 1.6 version XBox, both of which were acquired for free. I have started to dip into modding them to do some emulation after watching an excellent video on the Rocky5 softmod from Modern Vintage Gamer. Gonna slap some bigger hard drives in them and have some fun!

hi all, i just finished painting this xbox so thought i would share the pics, the colour is tangerine the jewel is white with black letters, i like how its turned out but i'm not happy with the jewel it may end up black with tangerine letters. sorry about the potato i took the pics with.

Wanting to buy a 128mb Xbox motherboard, I would prefer it to be a 1.2 or any revision that doesn't have the single row PSU connector Also I'm only really looking for people in Australia to save on postage cost @SS_Dave would you be interested in selling me a 128mb board since your in Australia?

xbox controller keeps disconnecting i tried another new controller and is disconnecting again i tried with ps2 converter adaptor controller still the same problem the controller work fine the xbox ports are fine where is the problem plz help me