Search the Community

I cant see anything in the file explorer and FTP doesn't work either. I tried to load a Bios from a usb but it file explorer is still empty.

Hi I've got another dead xbox the mobo is corroded by the clock cap. The previous owner tried to repair but components flaked off. I'm hoping I can add the missing components and get it working again with some help here. It's bad. It looks like 5 SMD transistors and 5 resistor or diodes are missing. serial and gfx chip (focus) suggest board is v1.4 according to https://www.informit.com/articles/article.aspx?p=367210&seqNum=2 The same area on v1.6 is very different so it would be a big help if anyone can photo the components on a v1.0 to 1.4 board thanks

I have been lurking for a while and I am not sure what mod chip to get. I have looked at the spreadsheet and while it shows features of each I am not sure which one I should try and find. I also have been reading where it is hard to find some of these and there are some who are getting clones from Ali express. goals for my build would be install make mhz hdmi mod minimum 2TB drive for games 128MB upgrade I saw on the make mhz site there is an open xenium mod chip that is back ordered till Octoberish. Is that something people on here would recommend or should I look at something else? Are certain mod chips better with certain revisions of Xbox? Are certain other mods(LCD, 1.4Ghz CPU upgrade) better with other mod chips?

Greetings Everyone, I'm about to install an Xecuter 3CE into a 1.6 Xbox. Does anyone know or have an opinion on whether or not I should cut the LFRAME trace? Thanks, RogueOgre

So I received this in the post today, to me it looks like a re-design of the Aladding XT. 1mb chip with X2 512k bios, xblas & IND 256k bios each. I've seen several posts and links here before to other forums about re-programming the IC on Aladding XT but no exact step by step guide. And recently someone else did it on discord and I reaced out to them but they never shared how they did it. I got a faulty Aladding XT which was working fine and had the chip on it flashed with Xblast bios for testing while doing ram upgrades until one day it went bad after an attempt and since then it just frags whenever its installed on any board. I know its not the ST chip as I re-programmed it and tried different ones but it just does the same which could only mean the IC gone bad or curruept on it. I've got several devices that could program the xsv files format like NAND-X, Glitch360 Spi & Matrix NAND programmer. anyone used or has idea how any of these can be used to program the IC on Aladdin XT or read the IC on this new Jafar chip?

Just thought I would start this thread as a kinda fun thing. Given most of us have modded Xboxes, got me wondering what people are doing thats technically not modding, or using it in a way the thing supposed to be. To this end I bring you The OGXbox door stop This is a limited edition, they only made one in clear as far as I know. Seriously when we have the doors and windows open in the house in the summer the near constant breeze always finds the doors and slams them shut. Doorstops are not great in our house as between pets and children they just disappear. So what better than a heavy old OGXbox to stop the door open. Yes in the UK we have so many Clear boxes we are tripping over them.

No bugs in here, just questions.

I’m attempting to fix a friends unmodded 1.0 Xbox with a dead HDD (error 7). I’ve successfully extracted the EEPROM using PiPROM and prepared a new IDE HDD with FATXplorer. However I’m having trouble locking the replacement Seagate ST3320620A IDE HDD which according the Xbox Hard Drive Compatibility Chart supports locking. Initially I used an IDE to USB adapter but XboxHDM23USB Beta 3 and 4 complained about an unknown USB chipset. I then tried a StarTech PATA2SATA3 IDE to SATA adapter which progressed a little further but still fails with “ATA SECURITY SETPASS failed: scsi error aborted command”. The output from XboxHDM23USB Beta 4 shows that the HDD is in the frozen state which I believe prevents unlocking/locking. If this is causing the failure, how can I unfreeze the HDD? Can I use some other utility such as hdparm to lock the HDD?

Hello all, I have a spare XBox, chip and HDD selling as a mod "kit" I just don't have the time or need for it now... This is a 1.6 XBox in working condition. The case has 2 very small marks on it - pictures of all this can be provided based on interest. I have an LPC rebuild board, an XBlast Aladdin2 chip originally bought from Retrogamerstuff and a WD 500GB HDD that has been unlocked and was previously used in another modded console - it still has EMUS, APPS and ROMS and stuff already installed. I can include a composite cable too, but no power cord. The consoles seem to sell between £30 and £50 the chips at £16 and the drives around £15 although I'm sure I paid a bit more as I bought NOS, anyway that would be £61 - £71. Selling here for £55 not including postage within the UK. Fire a message or reply if you are interested or have any questions, I can provide pictures too. Cheers!

I mean, played FIFA and it's like... ultra-complex campaign mode... very limited number of national teams (lots of useless clubs)... NO EDITOR (really? that's the funniest part, to build your own team!)... complex commands (some sort of mix between PES and older FIFA titles... switching player makes my mind stun...)... isn't there something really simple like older ISS games or even Virtua Striker series? Asking here instead of usual "top 10 soccer games" pages because those pages only talk about PES and FIFA. Of course, I'm not looking for excellent games... even "decent" are ok to me.

Hello, As any new member should do, I introduce myself. I am a 45 year old Frenchman who discovered the xbox when it was officially released in 2001. At that time I write hardware tutorials on its modifications for certain French sites which have sadly gone now. It was the good time of xbox scene and xbins. I left the Xbox world in 2010 following a difficult personal situation. It was in 2021 that I decided to get back into it. the French scene being almost dead the desire to revive it a little came to me by recreating a series of videos and tutorials in French. While searching on the net I went to this forum and reading this one I was very pleasantly surprised. I very quickly understood that I was on a forum of enthusiasts with very great technical skills. So I decided to join you. Thank you all for reviving the passion I had for modifying this superb console. P.s: Sorry if there are any mistakes, I use google trad. I understand English quite well but I find it difficult to write in this language.

Hi new to all this , managed to softmod and tsop flash my1.0 xbox and i have a IDE from a old xbox. I have been trying to use that but wheni put it in and try boot hexen it wont boot and just goes into the call support screen. I have made sure jumpers are the same but it wont boot into hexen. Could someone maybe point out what i am missing ? I have tried the hexen disc in before and it works fine and in my other xbox and it works fine.

Building a few OX and OGX360s any pointers? Do’s/don’t s? I already have everything minus the j1 conn on the OpenXenium thanks

I have downloaded all the DLC I could find for games( crimson skies, mechassault etc) I am wondering if it is possible to install this dlc with iso images of these games or do they have to be the HDD ready version of the game.

So had 4 xbox's sat in my room off ebay that I wanted to do ram upgrade on, booted one which greeted me with blue xbox logo and xecutor 2 at the bottom of the screen before loading what seemed be original dash. Opened it up and found a SST49LF002A chip hard wired onto the LPC port using enamled/magnet wire.

Shoot offers tested and working selling as bundle xenium ice chip along with xenium sp ice solderless adapter.

Trying to rescue a 1.6 box. The unit booted to microsoft dash but dvd rom drive has failed, tried cleaning and pot adjustment, no luck. Next obvious option was installing a modchip.Installed an Aladdin XT plus I had working in another 1.6 as was already flashed. On boot I get the unit cycle on and off until the third attempt where it flashes Green and red really fast. I removed the lpc wiring and modchip, even pinheader, checked for damage, the header is perfect and the xbox boots normally. I have never had an issue like this before. Do I just keep trying to install again or am i missing something. Does the 3 boot attempts mean something? I am unsure to the sequence of events from pressing the power button. Any pointers, help would be appreciated. Just dont want to throw it out. Update, the green / red fragging is not modchip related and happens intermittently when running the box without a modchip. Progressively worse the more boot resets.

Hello everybody. I am just returning to the original xbox ecosystem after quite a long hiatus. I originally joined and frequented Xbox-scene (with the same username I've chosen here) back in 03/04 and eventually fell off somewhere in the early days of the Xbox 360 and sometime before the site disappeared. Recently, I've been seeing a lot of videos on Youtube about people sort of bringing these old systems back into the spotlight, and decided it was time to pull mine out of storage and show them some long overdue love. I started with a v1.2 that I soon TSOP flashed with the Splinter Cell buffer overrun exploit, but soon caught the itch, promptly installed an Xecuter 2.3b lite and began diving in to all of the cool case mods including the clear LED backlit case jewels, a DVD drive window cut and LCD installs that were so popular at the time. After a while I reverted back to plain cases and less flashiness, and fast forward to today, I still have two v1.2s, one in an original case still rocking the X2.3b lite, and another TSOP flashed, in a green Halo style case. I really wish I still had all of my old pictures from those days of the mods I performed. I would love to look over them once again, and re-examine how well or poor of a job I had done as a young tool-inexperienced teenager lmao. So many memories of good days gone by. As for what's next, I've ordered a couple capacitor kits to refit both boards, as I'd like to keep them around another 20 years if possible. I also ordered a set of ram chips to do the 128mb RAM upgrade I always wanted to do back then, but was nowhere near handy enough with soldering, nor had the proper tools to do it. From there, we'll see. I'd be lying if I said I wasn't keen to get back into case modding, bringing with me a couple more decades worth well-needed know-how. Anyway, it's nice to be back. I don't have near as much free time these days, to stay eyes glued to the forums as I did back then, but I hope to stick around and maybe try to relive the magic once more!

I have an Xbox with a 2.6 but it’s missing the bank dip switch board and cable. Does anyone have one for sale?

Hello everyone. I just finished TSOPing an Xbox model 1.1 and decided I wanted to flash Cerbios 2.01 Retail, and after flashing I have a red/green flashing light with no picture. The system is hooked up via composite (yellow, red and white) video cables and now I have no picture. I cannot access FTP, either. I was also sure to FTP over the Cerbios.ini and boot animations to the root of C ahead of flashing. Can anyone help or point me in the right direction? Thank you.

Hello All, I'm about to get my mod on with one of my old 1.6 Xboxs. I've done a little bit of this, but I'm very intimidated by the "micro soldering" needed for the video ribbon cable. Does anyone out there know what type of soldering hardware I'll need to make that an easier step to accomplish? Tman

I made some homemade og xbox component cables using og xbox av cables and xbox 360 component cables. At first the homemade cables didn't work as I had read the diagram backward. Eventually it worked with what I assumed was fine colors until I took some comparison photos. Once going into xbmc, I noticed that colors were missing, specifically green and red. I've checked all the connections with a multimeter to make sure they go to the correct output. I also checked with a multimeter to make sure nothing was bridged. Everything appears "fine". https://drive.google.com/drive/folders/1p4oX9jJtl0ok6f0cWt4hHe7HL04pc1k8?usp=sharing That's some photos showing a comparison photo of my pound hdmi vs my homemade component cables and the connector itself for the component cables. Any advice on what could be happening would be appreciated. edit: Everything is ntsc, incase that's relevant information

I was given a broken Xbox version 1.0 and I want to take that mod chip and put in in my 1.3 . the chip is explained in more detail in this post I’ve found on the forum It was previously installed SOLDERLESS with a spring pin head system you just line up and screw down. When I took it out of the Xbox I noticed a random wire that was stabbed into the board? dose anyone know if this has a purpose or if it’s a necessity ? many thanks in advance

Xbox original controller modded communicator shell with power button and USB port.... This requires modifications to be done to the console for this to function with the power button. USB port works as is. make sure you Google what this is before you ask me any questions. $20 USA Shipped. Cash App or PayPal goods and services only

Xbox Original Modded Console. Custom Painted with Case Window and LEDs. Controller Custom Painted. RGB AV Cable. Power Cord. $160 USA Shipped Cashapp or PayPal goods and services.