Bgsmods59

When I re-soldered mine it didn't change anything either. I think it was the fact of replacing the Plcc32 support with a new one that it worked. My hypothesis is that the Plcc32 supports installed on these cheap adapters do not come into contact correctly with the legs of the read/write chip.

Is your tsop original or was it reflashed? If it is original the CD will not work, even if the component is defective. If it has already been reflashed but is corrupted there is a good chance that it will work.

yes I just kept the pcb and rebuilt everything. They may not be the same but the connections remain the same

I do it like this because I like the toolbox side of Xblast. And as I like to modify and test bios modifications (colors, etc.), it's more practical in the event of a problem.

For me the best is to flash the Tsop with the Xblast056 bios and use a chip containing Cerbios for daily use.

Hi, I had the same problem with a Tl866ii and an adapter purchased separately After trying everything on the software side I redid the soldering but it didn't change anything. I decided to be radical, I unsoldered the plcc32 support and the pin connectors then I resoldered new pin connectors and a new plcc32 support. After testing everything works now. This is my experience if it helps.

I use 49lf080a for xblast mods

an EL panel acting as an activity indicator of the hdd can be nice and much cheaper

I have about twenty like that. I wanted to make xblast and my lcd modules based on the explanations of ryzee119 but nothing works. I use a tl866ii and an altera programming cable. program all good but nothing works. thats why i think there is a problem on these pcbs.

after some research I found a post about the flash of this modchip. the method with xblast works without doing anything extra. I think the best thing to do is to identify the component model using xblast for example and find the corresponding diagram. then you have to identify the pin corresponding to the write function and check if it is not cut somewhere. a false contact on a weld that has aged badly is also possible.

indeed I was wrong between duox1 and duox2. Sorry

the bank selector is missing on the pcb. The little eproom looks swollen in the photo. it is the case or not?

Hello everyone. It is recognized that the Chinese version of the AlladinXT has problems with the flash of the 49lf020A because this one is actually a 49lf002. Do you know if the problem comes only from this chip or if the design of the pcb is also in question or even a blockage at the code level in the cpld? I wonder if putting a real 49lf020 in the chinese pcb would solve the flash problem.

to connect your wired xbox 360 controller to your xbox og you need an ogx360

hello, does your console start normally or does it make an error? If you have pics it might help.