SS_Dave

What version Xbox? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Try asking google for TruHeXEn 2019. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Thanks I just weighing up he cost with the Dollar here I would not get much change from $200 Aud Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

I might me interested where are you located.? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Hello Anolithma You will need a Install disk to setup the new hard drive Download and burn a install disk to a DVD-r disk and set the writing speed as slow as possible, Then load the disk and power cycle the Xbox it will then prompt you from there. I use Slayers 2.7 as a preference but other using Hexen 2017,18,19 with the latest been TruHexen there is other's as well and some that are tailored to different languages. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Hello jimmysmalls And welcome to Ogxbox .com If you can get you money back on the pound cabe do it. I have one of the pound cables that resides in the JUNK box it's the biggest Piece Of Shite I have got for the Xbox the same goes for the one from Aliexpress. I really don't know how it got such a good review I can only assume that the unit sent to the reviewer was handmade and had better shielding maybe,and then the unit from aliexpress is a bigger POS that looks like it's a composite (yellow) signal to make HDMI where at least the pound unit uses component (R,G,B). I use in my own Xbox's a internal kit from Lukas(N64 freak) it's not a cheap kit but you get what you pay for and in some of the ones I do for other people I use the wii2hdmi internal kit. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

I started looking in to unlocking Xbox drives and this is as far as I got http://www.hddoracle.com/viewtopic.php?f=83&t=874 I also read that it maybe possible to remove all the security and totally wipe the drive with a command in Linux, If you don't care about the contents, you could just zero the drive with a Linux live boot, using your PC. You don't even need to wait for dd to finish. Just let it run for a bit. dd if=/dev/zero of=/dev/(your hard drive) I tried but nothing happened for me Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

It properly just as easy it fix the power supply. What version is the faulty Xbox? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Orange/Green flashing Problem: This is caused when the A/V pack is not connect or is broken, it could also be a bad solder joint on the AV port to the main board. And check that the pins are not bent in the hard drive/DVD drive sockets. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Hello Pascal This is one reason I don't softmod and a hardmod/tsop flashed Xbox can work with the hard drive unlocked You could try some of the Master codes and they are case sensitive. WESTERN DIGITAL "WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD” SEAGATE -> “Seagate” +25 spaces For xbox hdds try “XBOXSCENE” or “TEAMASSEMBLY” Other wise you have a paperweight I did read somewhere that Linux can maybe able wipe the entire drive and remove the locking at the same time. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

The key thing that you mentioned is PRACTICE. And a poor trades person blames their tools. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

The clock cap on a version 1.6 is the gold colored one near the 40 pin connector for the drives ansd in the pics you have posted it looks fine. Can you postost a pic of the whole board? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

is there any error codes on the screen or whats the leds in the eject ring doing what sort of flashes fan running? do you have a multi meter? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Hello wwaha Welcome to ogxbox? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

There is a forum member Ryzee119 working on this. https://www.retrorgb.com/true-xbox-hdmi-mod-announced.html Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Is there a reason for this wire ? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Hello eAkGBG It looks a like a trace has been cut Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

This may work combined with a small (under 4gig)USB thumb drive used as a memory card. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Just jump in the deep end and fit a modchip. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Just keep in mind when your trying to remove the heatsinks I found it best to warm them up 1st especially the GPU heatsink in a OG Xbox. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Check this out it's a amazon cable https://www.facebook.com/bobbensun/videos/10158104831388708/ Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Did the FRAG (flashing red and green) happen before or after you edited the eeprom? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

I have tested CPU temps on unopened Xbox's of all versions and not seen any real difference after changing the paste. If anything maybe 1 or 2 degrees cooler and I have tried Arctic Silver 5, Prolimatech PK2,a copper based paste, as well as liquid metal pads. And we are talking about a 733 Mhz CPU not a 3 or 4 Ghz in a similar size package, The biggest drop I got was a new heatsink and that was about 5 deg celsius. it was 4 for silver and 5 for the black paint. Put if you feel better after changing the thermal paste go for it. As for the speaker cable I did blind test with speakers that sold for $10k and a $5 k 2 channel amp and using cheap cable that most people use it sounded excellent to my wooden ears but when the cable was changed to $2k worth for 10 mtrs holly molly the music came alive. Rant Off. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Some software has problems with non genuine controllers.I would find a MS controller and you should be fine Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Did you test to see if the other xbox booted of the fresh drive? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.