XxWeLLeR

Resolved-ish Attempted to mod another console, did the rocky 5 softmod, opened console and removed the clock cap, soldered tsop points, and swapped in another dvd drive since the stock drive way having disk read issues. boom error 16, combed over everything and still had error 16. tried reinstalling clock cap. no change. swapped the thompson dvd drive out back to the original and no more error 16. the thompson drive was in the other system i was having issues with as well. so i swapped in the drive from the new system and i was able to boot past error 16 (there were other issues) but NO MORE ERROR 16 anyone have any ide why a dvd drive would be causing this?

F***ed up my mod chip screwing around and waiting on another to come in the mail so it may be a while before I get back to trying to repair my console

sorry just double checked and it appears to be a 1.0, single row mother board power connector, heatsink fan, serial and dates, all align to a 1.0. Im attempting the suggestions above and will report back with my results. Thanks again.

Chip is soldered to always on

Not 100% on the version but updated with hexen 2018

I've tried both the stock "rebuilt" drive and the new 500gb drive blank and formatted using another chipped Xbox.

Running Evo x bios

SS_Dave and HDShadow thanks for the reply but I Have tried that as well. It will not boot a disc just goes to the error screen

I've got an Xbox v1.1 that's giving me error 16. I have little history on it besides that it was softmodded and worked before the clock cap was removed. I've used xboxhdm to rebuild the C and the whole harddrive with several stock and modded file sets. Used the error 12 hotswap method and was able to view the dashboard files on the drive. I've even installed a Aladdin xt2 chip that still showed error 16 I've even built an brand new unlocked drive on another system. Power cycled/unplugged/waited in built console with no issues. Then installed into chipped Xbox that still results in error 16? Swapping in another locked harddrive showed error 06 as predicted. Anyone have any idea what I could be doing wrong or anything to try?