Dtomcat18 Posted September 16 Report Share Posted September 16 I don’t know then. Sorry Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted September 16 Report Share Posted September 16 19 minutes ago, pejman1998 said: Yes , I did as soon as i read your reply there is no difference keep in mind that i am getting output TV recognizes that there is some sort of input but the out put is pure black! everything looks fine on set except it isnt ! Why are you using M8? Flash Cerbios dude. Lol Quote Link to comment Share on other sites More sharing options...
pejman1998 Posted September 16 Report Share Posted September 16 (edited) is there any other record for my problem? am I first person? Edited September 16 by pejman1998 Quote Link to comment Share on other sites More sharing options...
pejman1998 Posted September 16 Report Share Posted September 16 30 minutes ago, Bowlsnapper said: Why are you using M8? Flash Cerbios dude. Lol the reason is because I thought thats straight forward and hassle free ,but I will give what you said a try , I want 128mb udma4 supported bios for my 1.6 xbox , is it ok to help me find it ? Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted September 16 Report Share Posted September 16 8 hours ago, pejman1998 said: the reason is because I thought thats straight forward and hassle free ,but I will give what you said a try , I want 128mb udma4 supported bios for my 1.6 xbox , is it ok to help me find it ? Cerbios uses the same bios for all motherboard revisions, supports 128MB and has the ability to go up to UDMA-6. The Cerbios pack. https://drive.google.com/drive/folders/1mLG7-wDvXTxwU29e0et2StN7F1pVef1s UDMA-6 version, if you want it: https://drive.google.com/file/d/1Acg0EjnwAJUiatkRm7qSO3wRQYj_bY9X/view?usp=drivesdk 2 Quote Link to comment Share on other sites More sharing options...
pejman1998 Posted September 17 Report Share Posted September 17 13 hours ago, Bowlsnapper said: Cerbios uses the same bios for all motherboard revisions, supports 128MB and has the ability to go up to UDMA-6. The Cerbios pack. https://drive.google.com/drive/folders/1mLG7-wDvXTxwU29e0et2StN7F1pVef1s UDMA-6 version, if you want it: https://drive.google.com/file/d/1Acg0EjnwAJUiatkRm7qSO3wRQYj_bY9X/view?usp=drivesdk well Thanks for your help , but the problem still persists and i get a black screen , i will watch my soldering and i will disconnect pin28 from motherboard to see if it helps 1 Quote Link to comment Share on other sites More sharing options...
Marty Posted September 17 Report Share Posted September 17 18 hours ago, pejman1998 said: I'm confident that I don't have any shorts on circuit since there would be frag A bad RAM install doesn't necessarily "FRAG" (flashing red and green). A common symptom is just a boot loop and endless shutdown and reboot. Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted September 17 Report Share Posted September 17 6 hours ago, pejman1998 said: well Thanks for your help , but the problem still persists and i get a black screen , i will watch my soldering and i will disconnect pin28 from motherboard to see if it helps Is XBlast reporting a successful install for you? Quote Link to comment Share on other sites More sharing options...
Donnie-Burger Posted September 17 Report Share Posted September 17 Not sure if I mentioned this in here before. For anyone trying this: Samsung on samsung is the easiest option. Samsung on hynix or hynix on samsung is a little tougher. I believe I said that right. Ps: xblast can report 128MB and all 4 banks success and you can still have a messed up install. You have to go back in and find either the bridge(s) or pin that didnt get soldered down. I've done about 100 of these 1.6 ram upgrades. 1 Quote Link to comment Share on other sites More sharing options...
pejman1998 Posted September 17 Report Share Posted September 17 2 hours ago, Bowlsnapper said: Is XBlast reporting a successful install for you? xblast says they are successful , but im starting to doubt my installation, if i find spare time i will check , btw all rams ar samsung 1 Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted September 17 Report Share Posted September 17 11 minutes ago, pejman1998 said: xblast says they are successful , but im starting to doubt my installation, if i find spare time i will check , btw all rams ar samsung I think it's possible depending on which pins they are, for them to pass the ram check but to not actually enable a boot. When my 128 was having issues after overheating, It would ping pong back and forth between showing 128 and 64 in Xblast, even though it always failed the ram check and in fact would freeze XBlast when testing the 4th chip... however, in both instances it would boot the MS Bios, even though it turned out that legs were loose and it was all hell in XBlast until the legs were reattached. 2 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.926686e935310eae9234f93588b0e1f4.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.