pejman1998

well I've done that and you are right OGXbox installer is great , way more options , but I got same results , i desoldered 4 wires that came form piggy back memories and I dont get error 16 , I dont know! all of my 8 rams are Samsung and I have checked connections , it appears that rams are making trouble ,I will check rams again to see if there is something I am missing.

yes sire , and although it passed the test ,due to freezing on boot, I find out that one of chips was loose and I have redone the soldering the freezing is gone but this is my new problem

well first of all thanks for reply , replacement dashboard is installed on E:/Dash/main/Xbmc4gamers I just flashed cerbios without using .ini file , I used cerbios utility and I specified the dash I want to boot first to keep things simple let say I want to remove modchip and get into stock ms dash , and yes ms dash is installed by hexen on drive c , when I remove modchip, I get Error 21, that isn't normal is it? and BTW the bios I used before upgrade was m8+ and it boots successfully randomly ,but as I said when I turn on console by eject button I get error 16 and I cant boot into dash no more for hours , what would you do?

Hi friends! as title says I get error 16 every time I boot with Cerbios , and i get that error with m8+ too when i turn on Xbox with eject tray ,everything were fine before I decided to give 128mb ram upgrade a shot on my 1.6 OGxbox , I have deleted and formatted all the partitions and installed everything from scratch still i am getting that error , I dont know that if it is hardware related or not please help me I am out of patience by trial and error

Sorry guys now that I look over my posts i don't know that here was the right place to post them ,but anyways one of memory chips wasn't 100% attach to memory beneath it ,my friend has done the first one to show me how to do but the other 3 were my own soldering I didn't suspect my friend's job but surprisingly not one but many of pins were not soldered correctly by my friend and there wasn't continuity between same pins , so I think that "Xblast os" thing is rubbish since it can't confirm if all pins are soldered correctly , after redoing soldering I get xbox to boot but it gives error 16 on Cerbios and it says something about clock I have no idea what it means but I think its not hardware related may be by reflashing another bios it will get fixed I don't know, if there is something to tell me about it to get it fixed tell me please , thank you guys you are awesome

xblast says they are successful , but im starting to doubt my installation, if i find spare time i will check , btw all rams ar samsung

well Thanks for your help , but the problem still persists and i get a black screen , i will watch my soldering and i will disconnect pin28 from motherboard to see if it helps

the reason is because I thought thats straight forward and hassle free ,but I will give what you said a try , I want 128mb udma4 supported bios for my 1.6 xbox , is it ok to help me find it ?

is there any other record for my problem? am I first person?

Yes , I did as soon as i read your reply there is no difference keep in mind that i am getting output TV recognizes that there is some sort of input but the out put is pure black! everything looks fine on set except it isnt !

Hi friends, I have done 128mb ram upgrade on my 1.6 OG xbox , every chip I installed, I checked with Xblast os on Aladdin mod chip and it gave me success for all 4 banks but when i reflashed the modchip with m8plus1.6 either untouched or modified for 128mb ram or titan and etc , it just boots blackscreen, meaning that no frag or whatever, steady green light with hdd spinning but no picture at all ! I read somewhere there is a short somewhere but I'm confident that I don't have any shorts on circuit since there would be frag , any thought would be appreciated !