fritzelmaster

Posted on Offerup because ebay is dumb. Will also post on Etsy after they verify my bank account https://offerup.com/item/detail/d8854ea9-79df-3f3d-9706-bc30627539b7?_branch_match_id=1300906436386433827&_branch_referrer=H4sIAAAAAAAAA8soKSkottLXz09LSy0qLdBLztcv9DCtKjP3yKzwTAIAsgp4sx4AAAA%3D

Might as well paste my description here since ebay won't have it This is an Original Xbox version 1.0 with a 1.266GHz CPU & 128MB of RAM. It has been professionally cleaned and is in great working condition. It has a 2 TB HDD as well. Pictures are of actual item. Services Performed: CPU upgraded to Tualatin Intel Pentium III SL5QL 1.266 GHz CPU voltage changed to accommodate Pentium III. Overclocking software installed for operation up to 1.42 GHz (tested and works!). Fan speed increased to ensure CPU and GPU remain cool and last New thermal paste applied to CPU and GPU 128 MB Samsung (not chinese clone) RAM installed Custom Heatsink Bracket added to support CPU and GPU heatsink\ HDD and DVD caddies cut to ensure a good fit in the original case. Pinheader 2 TB HDD included OpenXenium Modchip Please let me know if you have any questions.

SL5QL

ebay took it down already so I guess just message me if interested.

I have this listed on ebay for $850 but would sell on Paypal or Venmo for $750 since I wouldn't have to pay fees. The CPU is upgraded to a 1.26 GHz Tualatin, but it overclocks to 1.42 GHz without issue. See ebay listing here: https://www.ebay.com/itm/335333381339

I am trying to program the CPLD of a Xblast Lite that I built. Got the PCB from a friend. I flashed the tsop on the chip successfully. The cpld seems to be programming, but the xbox still frags when I try to boot with the chip. I am using the Flashcat USB programmer and software. The file I am flashing is XblastLiteV1.xsvf: https://github.com/Kekule-OXC/xblast_lite_cpld/tree/master/xilinx_ise I am not 100% sure that this is the right file, but flashcat seems to not work with jed files, so it is my only option at the moment. The output log of flashcat says that I flashed successfully, but first it says "SVF Player: Failed sending XSDRTDO command (line index: 20)" so I am wondering if that has anything to do with the fragging. Does anyone have experience with this? Here is the log from flashcat: Disconnected from FlashcatUSB Classic device Connected to FlashcatUSB Classic, firmware version: 4.56 BSDL database loaded: 26 total definitions JTAG TCK speed: 1 MHz JTAG chain detected: 1 devices JTAG TDI IR chain size: 8 bits Index 0: JEDEC ID 0x59604093 (Xilinx_XC9572XL_(VQ44)) JTAG engine setup successfully JTAG index 0 selected: Xilinx XC9572XL (IR length Checking for a device specific script to automatically load Button Hander::Calling Event: RunXSVF Running XSVF file in internal JTAG XSVF player SVF Player: Failed sending XSDRTDO command (line index: 20) SVF Player: TDO: 0x03FFFE SVF Player: Expected: 0x000001 SVF Player: Mask: 0x000003 XSVF file successfully played Button Hander::Calling Event: Done

Looking to buy one of these for a bad flash TSOP recovery. Not interested in the Aladdin Xblast. Thanks!

I'm considering trying this. It seems more straightforward to just mod the motherboard fsb via software. But would we still need to ground the Speedstep pin to disable it? Also I know Floyd the Barber was looking into this a long time ago. https://assemblergames.org/viewtopic.php?t=59807&sid=0bd51d08756261c8cfc0a15592503dbb&start=30 Anyone know if these modifications would get the Xbox to read the FSB correctly?

Very cool designs. How did you replace the power supply?