Bowlsnapper Posted June 14, 2023 Author Report Share Posted June 14, 2023 2 hours ago, ModzvilleUSA said: For the Xblast aladdins, BT does not need to be tied to ground. If you check the info in the listing I have for these, I recommend just tieing D0 to ground on the xbox and not using the D0 pad on the aladdin as it tends to be unreliable. It looks like you have d0 grounded on the xbox here. Try removing the bt to ground wire on the chip. if d0 is grounded, it's normal for it to frag if there isn't a chip plugged into the pinheader. I do test each one of these before shipping but it's possible something happened in shipping. If you can't get it working I can swap it out for you no problem Will tying the BT to ground cause a malfunction like fragging? I've had the D0 on the chip and on the motherboard; I've had it all over. Lol. Yes I understand that D0 triggers an LPC load, whether there's something there or not! ill remove the bt connection. Thank you very very much for responding and giving your two cents. If I can't get this chip the boot then I'll ask for a favor from you. But I've tested my wiring with continuity and the rebuild is solid. Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted June 14, 2023 Author Report Share Posted June 14, 2023 Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted June 14, 2023 Author Report Share Posted June 14, 2023 Disconnecting BT ENTIRELY worked. Do this with the XBlast chips. @lopenator Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted June 14, 2023 Author Report Share Posted June 14, 2023 Took me a while to realize I wasn't using a sata drive in this thing. Ahem:... UDMA 5 will not work with a 160 gig IDE drive! Doi! Lemme try flashing one more time... Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted June 14, 2023 Author Report Share Posted June 14, 2023 Uh, THERE we go. This halo console has effectively been modded with an XBlast Aladdin. Thanks Modz! @ModzvilleUSA Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted June 14, 2023 Author Report Share Posted June 14, 2023 1 Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted June 14, 2023 Author Report Share Posted June 14, 2023 I have one last problem: The xblast menu ignores my power button preferences as far as which bank to boot. I'm assuming that this is because the Aladdin is not wired to my front switch panel. Correct? Whether I press power or eject, it just boots to XBlast. @ModzvilleUSA @KaosEngineer @lopenator @SS_Dave Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted June 14, 2023 Report Share Posted June 14, 2023 13 minutes ago, Bowlsnapper said: I have one last problem: The xblast menu ignores my power button preferences as far as which bank to boot. I'm assuming that this is because the Aladdin is not wired to my front switch panel. Correct? Whether I press power or eject, it just boots to XBlast. @ModzvilleUSA @KaosEngineer @lopenator @SS_Dave My Xblast is not connected to the the front panel and it will boot to the preferred bios with the eject button and Xblast menu with the Power button Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted June 14, 2023 Author Report Share Posted June 14, 2023 1 hour ago, SS_Dave said: My Xblast is not connected to the the front panel and it will boot to the preferred bios with the eject button and Xblast menu with the Power button Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Then what did I forget to do? Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted June 14, 2023 Report Share Posted June 14, 2023 2 hours ago, Bowlsnapper said: I have one last problem: The xblast menu ignores my power button preferences as far as which bank to boot. I'm assuming that this is because the Aladdin is not wired to my front switch panel. Correct? Whether I press power or eject, it just boots to XBlast. @ModzvilleUSA @KaosEngineer @lopenator @SS_Dave Is a preferred BIOS bank set in XBlastOS's settings? Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted June 14, 2023 Author Report Share Posted June 14, 2023 2 hours ago, KaosEngineer said: Is a preferred BIOS bank set in XBlastOS's settings? Well, I set it to boot from the 256k bios bank when the power button is pressed and then from x blast when the eject is pressed. It does neither. Well it will boot from xblast, but only because both buttons default to xblast. Lol. Did I skip a setting? I would think that if it's set to boot a certain bios if a certain button is pressed it would just do it regardless of anything else. Am I mistaken in that regard? @ModzvilleUSA Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted June 15, 2023 Author Report Share Posted June 15, 2023 I was enabling quickboot but not shutting down in a way that was committing the change. Once quickboot was saved as "on" it booted the Cerbios bank with power pressed. I am now fully good to go! I'd like to change that light for a green one, though. 3 Quote Link to comment Share on other sites More sharing options...
ModzvilleUSA Posted July 11, 2023 Report Share Posted July 11, 2023 Yeah that checks out. When I change my settings up I always boot up a bank in order to save the settings. Not super intuitive for sure but that's how I do it. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.