Search the Community
Showing results for tags 'speed'.
Found 3 results
Well, this question goes to those of you who have done this before. I recently got a TSOP'ed v1.2 xbox with ind bios 5004, 128 mb ram, 1ghz and 160 gb hdd. I also have a chipped v1.6 xbox with 2TB hdd (segate barracuda 7200 rpm) - and i made a clone of this 2TB to put into my TSOP box. I checked that the 2TB cloned hdd (seagate barracuda 5400 rpm) worked fine in my chipped xbox. And it did. Then i took the TSOP xbox, installed a 80 ribbon cable with a startech ide2sat2 adapter (jumper pins to master) and connected my new cloned hdd. [EDIT:] I start it and it a black screen with the letters "ind bios" appear.. i hear the hdd spin up twice... and nothing happens.. then i press eject button twice and the white ind bios splash screen appears, from here it takes some 10-20 seconds until dashboard appears. [/EDIT] On my chipped xbox it takes 10 seconds. What can i do to speed up the boot process ? RUn EVtools on indbios ?
Hello! My setup I have been running XBMC-Emustation dash on my V1.6 Xbox with a WD2500JB IDE drive ... the system was soft modded using Xbox-Softmodding-Tool. Both tools created by @Rocky5 https://github.com/Rocky5/ I want to update my storage and have both a 2TB WD20EARS and a 3TB WD30EFRX. I purchased the following ribbon and PATA>SATA off Amazon: https://smile.amazon.com/gp/product/B00EOJNGC2 https://smile.amazon.com/gp/product/B073CKHX7X (I bought two of each; I upgraded my brother's OG Xbox as well using a 1TB WD Blue drive... don't have the exact model in front of me ... but the ribbon and PATA>SATA worked amazing.) The Issue After loading the initial Xbox green splash screen, I am not booted into the Dashboard. Instead, the screen goes black and it just hangs. I've found I can open/close the DVD tray and THEN it will boot the dashboard. I've also noticed the speed is slower in both the initial splash screen and the loading of the dashboard itself (after I manually open/close the DVD tray to get the dashboard to load). Again, tested with both the 2TB and 3TB drives Things I've Tried Re-softmodding the system Both 2TB and 3TB drives Different default Dashboard (UnleashX) Additional StarTech adaptor Additional 80 pin IDE cable ... Anyone's input would be appreciated!
Board Life Status
Board startup date: April 23, 2017 12:45:48