Search the Community
Showing results for tags 'partition'.
Found 4 results
I upgraded the HDD in my Xbox to a 320GB SATA using a SATA/IDE adapter and upgraded the cable to a 80 conductor. The Xbox is a v1.0 with a AladinXT modchip. BIOS is iND-BiOS 504.67 (F and G) installed from a Hexen 2019 DVD. I prepared the hard drive using Hexen 2019 and everything works ok except I cant adjust the partition sizes in xbpartitioner. If I understand it right the Extended partitions 6 and 7 in xbpartitioner is for partition F and G. How do I take the space from 7 (G) and give it all to 6 (F)? I tried pressing the A button (and every other button for that matter) and nothing happens. Do I need to change the BIOS to an F only version? if so the only iND-BiOS 504 in Hexen 2019 says force 480p..will that be a problem? thanks
I have a version 1.4 xbox that was TSOP modded with X2 4983.67 bios and 750gb IDE hard drive. I have flashed IND-5004.67 bios to it and now it does not see the G partition. I have tried to re-partition the drive to no avail, it will not see the G partition. If I boot the HEXEN 2018 disk it sees the G partition or if I re-flash the X2 bios it will also see the G partition. I am at a loss to what the problem I have is? Has anyone had this problem before. Thanks.
I'm trying to install all the DLC available in my E Partition but they don't fit. Is it possible to make the E partition larger? It is ok if it involves losing data or reformatting the hard drive. I have an Xbox 1.1 TSOP with iND BiOS and 2Tb HDD. How can I make partition E to be 10-12Gb?
Hiya, just TSOPed my 1.2v Oxbox and put in a 160gb hdd. I split the F & G partitions 74ish gb each. The F partition show 74ish gb but G partion is 0gb. Used HeXEn 18 and the evox M8+ bios F+G, Both F & G values showed in XBpartitioner 1.3.
Board Life Status
Board startup date: April 23, 2017 12:45:48