Search the Community

Hello guys, I just updated the fan of my Xbox and want to set now the default value of the fan to 100%. Unfortunately I don't have a Windows machine to edit the evox.m8plus.v16.fc.137.bin. If someone can tell me how to edit it on a Mac I'm also can also change it myself. Thanks for your help. Regards Nikolaj

My setup: -Xbox 1.6 -Aladin modchip -500gb sata hdd -adapter sata ide pretty new and funcitonal -truHexen2021 boot disc, booting just fine After i've managed to install everything with the boot disc, the console hangs in evox logo. If boot with the disc, it loads ok. Steps: -Boot disc, prompt "new hdd", formated -Hdd tools, formated again with xbpartitioner 1.3, leaving only f partition 430gb~ -Created only F partition, not g. -Install dashboard: xbmc4gamers: prompt: use as main one? Answer: Yes (on f partition) -Clear cache, check if f is created on file manager, apps folder ok, xbmc4gamers ok. -Took off the disc -Boot xbox -Evox logo hang screen. microsoft text below the screen Did I miss something? Thank you if you read till here.

Hello everyone, I want to store my game collection in the most authentic way possible (matching Redump) but that takes a lot of storage. So, I did a little bit of research and now I have few questions (and few requests) that I hope someone could help me with. It seems to me that there are three main formats for storing a retail OG Xbox disc: (1) Redump ISO (2) XISO (3) Extracted files/Game Folder I did some testing with: Halo - Combat Evolved (USA) (Rev 2) {crc="013986d0"} JSRF - Jet Set Radio Future (USA) {crc="b2a882df"} Mortal Kombat - Deception (USA) {crc="007bcbcc"} A ----------------- In the Xemu documentation it is mentioned that you can create an emulator-compatible .iso file by using either of the commands: -with dd: dd.exe if={redump_game_name}.iso of={output_game_name}.iso skip=387 bs=1M -with extract-xiso: extract-xiso.exe -r {redump_game_name}.iso But these two methods produce different .iso files. The one created with dd.exe is much bigger. A1- Are these two different forms of XISO or is the .iso file created with dd.exe just a trimming hack and not a proper XISO? A2- Is what is trimmed with dd.exe the same for every retail disc (meaning we can just keep one copy to rebuild every disc with it)? A3- What is the effect of using the two commands together? A4- In this post JayFoxRox says that we can separate the video and game partitions and recombine them later. Also he says that the video partition is the same for most retail games. Is that true? What games have special video partition? How to separate the two partitions and recombine them to give the original Redump CRC? If the video partition is the same for all/most games, that would mean that we can keep one copy of that partition to recreate the Redump ISO from any XISO file (saving a lot of space). The exception being the random padding that we need to find a way to recreate. B ----------------- Extracting the files from a Redump ISO with with extract-xiso extract-xiso.exe -x {redump_game_name}.iso then generating a .iso with them extract-xiso.exe -c {Folder_with_all_the_files} gives a .iso file with a different CRC32 to the .iso file that is created from extract-xiso.exe -r {redump_game_name}.iso I tried to use IsoBuster 4.8 (free) on a Redump ISO. It worked for listing the LBA for the files and for extracting the game files. IsoBuster always showed 4 partitions for the Redump ISOs: SEP13011042 SEP13011042072 VIDEO XBOX and two partitions for the XISO created with extract-xiso: - {it's just a dash} XBOX The files didn't change (I extracted again and compared) but I noticed that the some LBA for the files is different. Maybe there is something else that is different as well? B1- Is there a program that can create/edit ISO files based on LBA information (maybe like PS3 ISO Rebuilder with IRD files)? B2- Does this mean that we need to create files like IRD files for the PS3 (Layout files?) to be able to recreate an XISO file from extracted files? B3- Anyone knows a program that can do that for XISO files? For Redump ISO files? (similar to Redump2IRD) Note: I tried IsoBuster 4.7 and didn't work for me. In their release notes for 4.8 they mention {better XISO support}. General Questions: 1- Do you think we should start a database for the random blocks seeds using the tools in HERE? (even though we can't do it for all discs right now) 2- Can anyone provide the attachments from this thread? 3- Can anyone provide a compiled version of this program?

I have noticed that there are still a few sealed consoles on ebay and they can get quite expensive. With all these consoles being sealed and in storage for over 15 years is it likely that the caps (apart from the usual problem caps) will need to be reformed or replaced before powered?

Hi guys, My problem is that i can connect to ftp via filezilla and i can also download games from my hard drive but if i want to upload games it always says connection to server lost... and then retries. What i have is a Alladin XT plus and evolution x. Maybe someone knows the problem.

Hello All, I finally got my Xecuter 3 CE working! I had to swap to a whole new console since the video out died on the old one. Somewhere in the troubleshooting of the old console the bios seems to have been wiped from the Xecuter 3 CE. Currently I am succesful getting it to boot to FlashBIOS 3.0.1, but don't have a file to load there. I've been googling, but most of the old download links are broken. What is the latest version Xecuter Bios that I am looking for? Anyone have please? Should I load it on both 1MB banks so this doesn't happen again? I've been out of the scene 10+ years, so I welcome any advice. Thank you!

I'm thinking of cleaning the inside of my xbox but i wonder if it is save to take the sink off and if yes do i just rip it off bby force or do i need something that shoots direct heat onto it in order to get it off.

Had a weird experience with my latest mod, an xbox 1.6 chipped with an Aladdin XT. First, the dvd drive has a terrible sticking problem I have been unable to fix so far. So, I swapped out dvd drive with another one from a parts xbox, oddly the new dvd drive will play official discs but seems not to read burned discs despite the modchip??? So, unable to boot Hexen I had to swap back to the original (sticky) drive in order to set up the new hdd. When I attempted to run my tried and true copy of Hexen 2017 the disc still refused to recognize at all for some reason (btw just wtf here, this disc has always worked on every other xbox I've modded - but now no), but a copy of Hexen 2018 did in fact boot right up. I went ahead with Hexen 2018 (although I prefer to use 2017 due to having some issue previously with 2018, I can't remember now just what..) and everything seemed to go okay... until I tried to set up hd video modes. I get this error, 'msdash.xbe does not exist' or something similar. Seems that does not get installed when you use Hexen 2018??? According to some thread this file IS included on Hexen 2017 which makes sense because I never had this issue before. Anyways, after all this I just got impatient and ftp'd a copy of msdash.xbe over from another previously modded xbox 1.6 running the same modchip and... now the machine errors out with hardware error 21 every time I try to run the ms dashboard. I feel like I'm starting to lose my mind, I actually already had a couple of other issues earlier on in this mod but got past them. I saw another suggestion to just download msdash.xbe from the internet but when I googled to download it there were like four different versions or something and I really just don't want to mess around anymore. Can anyone help? Thanks in advance if so...

Hi, I have an OG Xbox with an unknow (to me) Mod, it was given to me maybe 10 years ago as it is now. The mod chip has a paper backing with no writing and the other side only has info re: the jumpers (pic), no identifiers that I could find. The boot screen shows XECUTER2 (pic) and the dashboard it goes to shows RemoteX v1.8.2812. It'll play backed up games and had one game loaded to the HDD listed in apps (not games), but due to E: being low on free space I deleted the data files for said game so it is up to over 4GB free now. I tried to upgrade the HDD with a 500GB SATA HDD using a PATA to SATA adapter (setting the jumper as needed) but the system would boot to a service error. I then tried a known good IDE drive which lead to the same error. Unless that is not a mod chip and this is soft modded? I have HeXEn 2018 on DVD, booted to that and tried to install Chimp to E so that I could clone the data to another drive. It installs but when I go to my dashboard I do not see chimp but the files are on E: Any ideas if this is soft modded or is that indeed a modchip? Suggestions on how to proceed in getting another HDD in the system? I don't need any of the data on there, would just like to be able to get the drive in and FTP over some games. Any other suggestions? Thanks for reading!

I have a Jet Set Radio Future save that I have played around 25 hours in that I would like to be able to play on my console, but I haven't been able to figure out how to resign the save. The save has an "error reading JSRF save data" and doesn't let me use my save. The save originated in Cxbx-R and it won't allow me to move the save to or from the console without this error occurring. Not sure how to proceed from here, and would be grateful if anyone wanted to help me out. I have attached the save if that can help, thanks for your time. 5345000a.zip

Hi guys, So I was given an Xbox 1.0 from a friend that is chipped and has a 120gb HDD. Unfotunately the chip does not have support for HDD larger than 120gb and I am unable to flash the chip's BIOS (evox says it is not flash writeable). I'm basically in a bind to find a guide on how to softmod this box and tsop it from a modchip because I don't know what type of chip it is and how to disable it. Pictures below: Apologies for the very dusty MB, lol! As always any guidance will be highly appreciated.

Hello Together, I bought an xbox today and planned to do a softmod. When opening the console to remove the clock capacitor, I noticed that a modchip is already installed. Unfortunately, I can't find any information about this chip. Can you help me further? Can I just ignore the chip or should I pay attention to something? Is it possible to simply install a SoftMod ! Thank you for your help !

Anyone here has copy of the new Softmod Installer 6 Deluxe plus the USB version (SID6) that they can share?

Hey guys, Wyverino here I am fairly new to the xbox modding scene. My gf just gifted me an old premodded 1.1 for christmas and I love it so far. I just want to tweak it a little more to make it my hopefully favorite console! Wish all of you guys a happy new year!

Hi modding noob and first time poster here..just need some help with the IGR function on this xbox 1.6 I bought used. Everytime I try to use the button combination for IGR the console goes back to the logo then the screen blanks out. I would then need to do a hardboot to get back to the dash. Another thing I noticed is I need to hold the power button for at least 2 seconds to get the chip to load the custom bios or else it would just give out an error code. Plus for some strange reason the chip isn't flashable according to evox, though I know these aladdin chips should be flashable? I'm pretty sure this has something to do with the modchip probably not wired correctly, so if anyone can point me in the right direction that would be much appreciated. 136470232_800537637170333_6562823261258646262_n.mp4

My OG XBOX is a version 1.4 and has been TSOP modded and is running INDBIOS 5003 with F & G support. I am using Rocky5's ISO BIOS patcher as the first thing that runs at bootup (DASH1 in IND0BIOS.CFG) to get ISO loading working and that is fine (I used to run UnleashX and needed it, not sure I still need it with XBMC4Gamers but assumed so since I'm using INDBIOS 5003). I assembled the patcher.xbe (named it "XISO Loader.xbe") with it pointing to the dashloader.xbe at C:\DashLoader (renamed from C:\evoxdash.xbe) which, in turn, defaults to my XBMC4Gamers default.xbe at E:\XBMC4Gamers\ directory. I edited the "A" .cfg that resides within the C:\dashloader directory to point to the Enigmah PAL/NTSC app in my E:\Apps\ directory in case I want to switch video modes. All of that works great. I can boot to XBMC4Gamers by default or hold "A" and get to the Enigmah video switcher to select PAL or NTSC. Fantastic stuff! But, now, I am trying to get the dashloader configurator GUI to work for configuring the dashloader button settings and I can't get it to work. I installed the dashboard configurator from the URLDowloader within XBMC4Gamers into my E:\Apps\ directory and that seems to work fine as I am able to run the configurator which loads the settings from somewhere and will save settings somewhere BUT it does NOT really impact the A,B,X,Y, etc. .cfg files within the C:\cashloader\ directory. What am I missing? Thanks in advance for any assistance.

I have a BGA rework station and decided to upgrade the CPU in my v1.0 xbox because why not. The operation went fine, except when removing the awful plastic clips for the heatsink attachments, my screwdriver slipped and knocked off 2 components. I did not notice this until after the operation. One component knocked off was the RP5N1 100 Ohm terminator block for the RAM. This was easy to replace. The other component knocked off was the R5N1 resistor. None of the resistors around it report any consistent value, so I can't just guess at it. A 128MB RAM upgrade guide here https://quade.co/2018/xbox-128mb-ram-upgrade/ actually has a picture of this resistor with the value printed on it, but the image is too blurry to read. On v1.0 this resistor is just blue with no value, but it looks like some version between 1.1 and 1.5 actually has the value printed on the resistor. If I could get that value, then I can fix the FRAG. I would hate to buy a 1.0 board just to get this resistor value. I would really appreciate it if someone could get me images of the resistor value. It cannot be measured with a multimeter as one end has a really big cap on it, but maybe getting that reading would still be useful to me to narrow guessing at values (resistance will be something higher than what is read). Also lesson learned: When removing the heatsink bracket screw clips, just chop them off and replace them with screws/nuts. It's way safer for your board.

everything's been solid for some time now save for a couple of games that simply refuse to work and im ignoring them....., so my wife created a new profile to use instead of using mine so she could set faves and such...seemed like a good idea....but now, no profile works...so im stumped "script error"script failed xbmc4gamers" then it pops up a message on the bottom left of the screen "error script is missing or taking to long to finish, please send me a copy of your xbmc.log file " i assume the log file thats needed is the /E/xbmc/system..if so..its attached. xbmc.log

I have an 1T XBMC4GAMERS Original Xbox that is stuck on profiles after boot. I got it for a 6yr old and I believe he accidentally erased the original profile. I created a new profile and loaded it but it still returns to profiles after boot up where it used to go emulator menu. My email is [email protected]. I am located in Missouri USA. If anyone can help me I have PayPal and am willing to Compensate. He really liked all his games.

hello all, im playing some Forza Motorsport the NTCS version and the collection of trainers i have only has a couple PAL versions for this game and they don't work with my version of Forza, so im trying to figure out how to make my own, i have setup an old laptop with windows xp and found a version of the XDK and installed it, can anyone help me out with this? should i try to make a evox trainer or some other format that is compatible with xbmc4gamers ? thanks in advance

I've been trying to TSOP flash my 1.1 XBOX. I've successfully soldered the proper connections on the motherboard (not easy with a soldering iron that doesn't have adjustable heat levels). But for the life of me, I can't get HeXEn to burn to a disc. I've tried 3 different computers and used up 5 DVD-Rs. I've been battling with this Xbox for months now, and I'm sicking of pouring all this money and time into it without any results. I know it's silly to ask, but is there any way that someone could mail me a copy of HeXEn on a disc? I will more than happily pay for the mailing costs of it (shouldn't be that much anyways). I just want to get my Xbox back in working order again so I can finally store my games and play them. If anyone would like to help me out, please shoot me a message and we can arrange details. Also, there's a program that checks if you've properly soldered the connections on the motherboard, right? If someone has that, the same arrangements can be made (preferably both discs from one person). Hopefully this request isn't out of line. I'm just really tired of this thing not working for me.

So here's my situation, My 1.6 burned out about two months ago now. Trusty system, but now it's doing the on/off three times frag thing. For 10 bucks I bought a 1.0 Xbox. It however, didn't have a hard drive in it. Error 7. The man gave me back my money and let me keep the Xbox because he didn't know it was lacking a hard drive. So, I have these two boxes. My 1.6 has an 80 gig drive. I received in the mail an Aladdin XT Plus 2. What can I use this chip for to get either of these boxes running? Can I simply plug the Aladdin chip onto the 1.0 board? Modding the 1.6 is a bit ridiculous, and I am not sure if the chip will repair the system anyway. I can't find any info on using the Aladdin chip on a 1.0 board, but with that unit NOT having a hard drive I cannot tsop flash it, so if I can boot it via the Aladdin chip and the then set it up I am PERFECTLY FINE with that as a solution. Looking for as little hogwash as possible. Thanks for your thoughts.

i am very strongly considering modding a v1.0 xbox. i want to install every official xbox game that was ever made onto it along with all the patches and dlc. i already have an alladin chip. can y'all give me a quick list of each item that i will need to do this mod and how big of an hdd will i need? thank u.

haven't been able to find a vid of it. anyone know of one?

i tried soldering in a pin header for an alladin modchip. the modchip didn't work so i need a schematic to see which part of the board each pin is suppose to connect to so that i can check my work with an ohm meter. anyone have that schematic? it's a version 1.0.