BaconWizard17

Thanks! Do you know if it needs any certain format?

Greetings all. I wasn't sure where this would fit best so I figured I would drop it here. I'm looking to convert some files to XMV format. I have a modded xbox with dragon on it, and I wanted to change the preview videos that show up for the games. Let me know if there's any way of doing this. Thanks!

Thanks for offering to help everyone. I did solder at those points, but I don't think I successfully bridged the connections. I borrowed a soldering iron when I did this, and it was way too hot and basically just vaporized the solder. I'm not really interested in buying my own right now. I'm sure with the right effort I could do it, but I've been trying this for a bit too long. I just want to be able to actually start playing my Xbox instead of tooling around with it for weeks on end. I do very greatly appreciate all the help everyone has given me through this process. Maybe someday if I want to do this again, I'll try my hand at it, but for now I think I've done all I can. As a side note, I'll be selling the Xbox that I've been working on, as well as the hard drives and other things that I got for it if anyone has any interest in that. The console still works and is softmodded and everything, I just couldn't get the hard drive swap worked out.

Well, it looks like I soldered something wrong because it's saying the chip isn't writeable. I gave it my best shot but I think I'm just going to throw in the towel and buy a modded one instead of tooling around with this forever

Thanks a bunch! Here's hoping this works

I know it's been almost 5 months since I last posted here. I've had a lot on my plate so the Xbox went on the backburner. Is there any chance you can reupload this link again? I've had more free time up and I want to finally finish my Xbox

I'll hopefully try that this weekend and report back I've been using ImgBurn. I generally have most stuff closed out when I do it, but maybe having even a few other things open causes problems. I'm not sure

Will I need to use the evolutionX dash for this to work, or will UnleashX be fine? I don't doubt that the burner is an issue. I've tried 2: one is an external DVD drive that just plugs in, and the other is a built-in laptop DVD drive, so probably neither one is ideal. I got the software from this tutorial by Slot1Gamer, so I don't know if it's reliable or not. I did try a different version of HeXEn (the 2018 version I think), but that didn't work either. Whenever I would burn using the external drive, it seemed like it just stopped responding at a certain point and the light on the front would stop flashing. Maybe some other process seized control of the disc drive, but I'm not sure.

All I have is Rocky5's softmodding extras disc. As stated above, I couldn't get anything to burn. I'm going to try to do what SS_Dave suggested though. If I didn't get the bridges right, it won't hurt my Xbox to try the flash, right?

Interesting. I didn't know that was possible. I do kinda like the aesthetic of the OG controller though

I think I have unleashx. Can I install evolutionx from the softmodding extras disc? Is there a tutorial on doing the flash that way? I don't know for sure if the bridges are good, but I don't have bios checker on disk. Is there a way to get that without the disc?

Follow up: I did some deconstructing, and it seems like the only thing from the Xbox One controllers that will work on the OG Xbox controllers is the joysticks (I haven't verified since I don't have an Xbox One controller to deconstruct, but this seems to be the case). The buttons won't work; they have different patterns for the little slots, and they're different heights. Triggers are obviously out of the question without having to check, start and menu buttons are done completely differently so those don't work, and obviously the bumpers can't be subbed out for the black and white buttons.

I'm going to be honest, I don't know what evox dash or xblast os is. I think my tsop chip is ST brand

Yeah that would probably be a while to get here. I'll try your method, but if anyone from the US has it on disc feel free to message me

I'm in the central US. I can certainly try your option. At this point I'm not sure what's going on, so I'll start there