Ging3rguy
-
Posts
837 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Calendar
Store
Everything posted by Ging3rguy
-
You can get these from eBay, amazon or AliExpress. https://www.aliexpress.com/item/32887865209.html
-
Make sure you have protected turned off on the middle switch when you are trying to flash to the chip as well.
-
Here you go The LPC Debug Port is an unpopulated 2x8 2.54mm (0.1") footprint. Info from here https://xboxdevwiki.net/LPC_Debug_Port
-
Using a higher rated voltage cap should be fine, not read about the 6.3v not being adaquate but have read about dodgy caps. https://en.m.wikipedia.org/wiki/Capacitor_plague
- 93 replies
-
- 1
-
-
- hyperkin
- hdmi issue
- (and 8 more)
-
Faulty Xbox 1.1 + Apple-X VI Modchip
Ging3rguy replied to Vendest's topic in General Xbox Discussion
Found this for the pro. -
Here’s a video about the much loved pound cable and the 1.4, I know it’s not exactly the problem you have but it does suggest changing the caps and a few other things. I use a pound cable and my 1.4 is the only one that has issues with the pound cable and changing the caps did nothing, but the caps did need changing anyway. https://youtu.be/Hr5Ao4vFuE4
- 93 replies
-
- 1
-
-
- hyperkin
- hdmi issue
- (and 8 more)
-
Do you have your replacement drive? If you do install it, put an install disk in your dvd drive and turn on the Xbox, if it is a hardmod you will be asked if you want to format the hdd, if it is a softmod you will get an error code and will either need to format your new hdd using chimp or xboxhdm.
-
If you didn’t use a hdd key to lock it try using master password XBOXSCENE or TEAMASSEMBLY
-
You need to have the recovery.bin already on your e partition for the recovery mode to find. Just get a copy of xos2.3.1 hdd and ftp the recovery.bin from the recovery folder not the reset factory default folder. It can just sit on your e partition for any future issues.
-
To use the recovery mode, flick the switch to recovery and then turn the Xbox on it will look for a recovery.bin either on your dvd drive or in the root of e partition. Once it has flashed just flick the switch back to safe mode.
-
Try swapping the drives and see if the games work on your other Xbox.
-
Check for trace corrosion caused by a leaky clock capacitor.
-
If you want a different temperature try a different dash
-
try a fresh install of the games and just check that all the files transfer, have you tried loading them in ntsc and pal?
-
Do you have a locked hdd or your hdd key? Try removing the chip and booting using the ms bios. Have you tried flipping the recovery switch on the chip?
-
Hi, welcome back, you should be able to get your questions answered here. This is what I use for solder other brands will do the same, just go for a 60/40 mix with a low melt temp and for flux I would go for a rosin flux pen, less mess.
-
Igr will load to your default dash, in m8+ it loads to logo but you can change it in evtool to load to default dash. I have read in other threads by kaos that there my be a saving using xiso. It depends on your hdd and cluster size.
-
I have attached a thread about playing xISOs from your hdd.
-
Do the softmod, backup the eeprom info to a pc, install a larger hdd and load games to it. You could use backup disks but eventually your dvd drive will die and getting spares is getting hard.
-
I have some arctic silver but have never used it, I have never removed the paste and have seen some f###ed boards from owners just levering off the heat sinks. If it ain’t broke don’t fix it.
-
You can control temp with your dash, the only problem is as soon as you play a game that stops working, if you are concerned about the temp adjust the fan speed in your bios. The Xbox will just turn off if it gets to hot, I have read that it cuts out at 72 C.
-
Save your dvd drive and ftp it to your hdd using qwix. What is your system setup?
-
Nope, my boxes idle higher than that.
-
I wouldn’t bother you will not get the benefit of the extra speed and it will probably run hotter.
-
It would be easier for you to visit the site.
Board Life Status
Board startup date: April 23, 2017 12:45:48