Jump to content
OGXbox.com

EvoX M8+ / Setup Fanspeed permanent


Onaga
 Share

Recommended Posts

Where can I change fan speed?

Since Insignia I flashed my TSOP with EvoX M8+... I used to have iND before...

The problem is, I don't know where to setup the fan speed... I can change it in XBMC4GAMERS but as soon as I start a App or Game it changes back to low speed.

This is not good because I'm useing a different silence fan that needs to run at least with 80% speed to keep the Xbox cooled.

My Xbox HDD is installed with Hexen2020. It has all the other Dashboards and I tried everything... Dashboards from Apps folder, HexenTools folder, C Partition... but it won't work, it won't save the fan speed like it did with iND and his config file.

Any idea?

Link to comment
Share on other sites

On 11/20/2022 at 7:57 PM, Onaga said:

Where can I change fan speed?

Since Insignia I flashed my TSOP with EvoX M8+... I used to have iND before...

The problem is, I don't know where to setup the fan speed... I can change it in XBMC4GAMERS but as soon as I start a App or Game it changes back to low speed.

This is not good because I'm useing a different silence fan that needs to run at least with 80% speed to keep the Xbox cooled.

My Xbox HDD is installed with Hexen2020. It has all the other Dashboards and I tried everything... Dashboards from Apps folder, HexenTools folder, C Partition... but it won't work, it won't save the fan speed like it did with iND and his config file.

Any idea?

Or you could use the new cerbios as you can set the fan speed in a config file and it's XBL compatible.

 


Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

  • Like 2
Link to comment
Share on other sites

On 11/20/2022 at 9:23 PM, KaosEngineer said:

You have to edit the BIOS with EVTool v1.0.9, save a new dot bin file, upload it to your Xbox then flash the updated BIOS to your TSOP. There is no easy on-the-fly fan speed change available with M8plus by editing a configuration file on the Xbox's hard drive.

599469499_EvoxM8plusFanSpeedSetting.PNG.5173da1b34a25db82a869d0036db85e0.PNG

Alright. This is what I expected. Thanks for the clarification 👍

On 11/21/2022 at 11:26 PM, SS_Dave said:

Or you could use the new cerbios as you can set the fan speed in a config file and it's XBL compatible.

 


Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Does Cerbios work with insignia? 😅

Link to comment
Share on other sites

On 11/20/2022 at 12:57 AM, Onaga said:

Where can I change fan speed?

Since Insignia I flashed my TSOP with EvoX M8+... I used to have iND before...

The problem is, I don't know where to setup the fan speed... I can change it in XBMC4GAMERS but as soon as I start a App or Game it changes back to low speed.

This is not good because I'm useing a different silence fan that needs to run at least with 80% speed to keep the Xbox cooled.

My Xbox HDD is installed with Hexen2020. It has all the other Dashboards and I tried everything... Dashboards from Apps folder, HexenTools folder, C Partition... but it won't work, it won't save the fan speed like it did with iND and his config file.

Any idea?

Have you tried modifying the bios file in evtool? Fan settings should be in there. Flash and you should be good. Just make sure it matches your xbmc speed so you don't have fluctuations like that.

Guess I was a little late. Kaos got you. :)

 

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.