For some reason while trying to flash a new bios to my TSOP I got a message saying 'programming failed', and now I get no picture when my console boots and the LED flashed red and green. So i'm thinking it's bricked. I was wondering if I installed a mod chip would this then save the console? I've seen an 'Aladdin XT+4032 X2 Plus' on eBay and the installation seems very simple for these chips.
Hello, hoping someone can help here. I've made several xblast aladdin chips, as well as the Jafar chips, and quickboot will never boot the designated bios i have selected in Xblast Settings. No matter what i do, it always boots to the Xblast OS. For example: i have quickboot set to yes, i have X25035 as my 512k Bank(0), IND5003 as bank(1), and Cromwell as bank (2) aka Xblast. If i assign either the 256k or the 512k bios to launch pressing the Eject button, it will work as it's supposed to.
Hi i have a Xbox 1.0 with a corrupt bios and i discovered that the TSOP mod wasn’t done before i flashed it and ended up corrupting the bios. I tried the 3 wire trick and that didn’t work and can’t seem to find any bios reflash settings on the Open Xenium mod chip. So that really only leaves me with flashing a new chip and soldering it in. Is that the only option i have?
Board Life Status
Board startup date: April 23, 2017 12:45:48