Moving From Softmod To Modchip

[archfranck]

but r7d3 is not in my motherboard 1.1 I have this equal to the photo where you deleted R7D10. I proceed?

[archfranck]

this is my situation in my moterboard front and rear.
but r7d3 is not in my motherboard 1.1 I have this equal to the photo where you deleted R7D10. I proceed?

[Ging3rguy]

Use this for finding the right tsop solder bridges for your Xbox.

https://www.biline.ca/xbox_solder.htm

looking at your pics you don’t have a 1.1.

Edited June 12, 2020 by Ging3rguy

[SS_Dave]

Here is the 2 points 

 

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.
 

[archfranck]

yes i not have 1.1 but softmod tool sign 1.1.. azz ok 2 point in same side front ok

 

[SS_Dave]

Also that TSOP in the pic is a Winbond chip.

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

[archfranck]

ok done maybe I used a little too much, I hope the sides of the motherboard is isolated

[archfranck]

 

now the problem is to see in the meantime if I did the welding well and how to load the bios and the only way I have is to do it via soft mod .. now I go to bed tomorrow morning I put everything back on and turn it on

[SS_Dave]

Ok let me know how you go with it ..

Have a good night

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

[archfranck]

 

ok this morning I reassembled everything and in the meantime it turns on normal with the original Microsoft dashboard.
This already means that I have not done damage.
Now since I have problems putting the direct tsop files and the memory card on the USB stick, unfortunately they didn't sell it to me. I believe that in the meantime I have to install the softmod as I always have and then put on the DVD of slayers or hexxen and flash.
If all this is correct I proceed and then you indicate which files to choose from slayers or hexxen.
After this experience I want to try to make a chipmod on a 1.6 version .. eheheh

[SS_Dave]

37 minutes ago, archfranck said:

 

ok this morning I reassembled everything and in the meantime it turns on normal with the original Microsoft dashboard.
This already means that I have not done damage.
Now since I have problems putting the direct tsop files and the memory card on the USB stick, unfortunately they didn't sell it to me. I believe that in the meantime I have to install the softmod as I always have and then put on the DVD of slayers or hexxen and flash.
If all this is correct I proceed and then you indicate which files to choose from slayers or hexxen.
After this experience I want to try to make a chipmod on a 1.6 version .. eheheh

yes do a softmod 1st

Flash using the winbond and use the IND bios.

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

[archfranck]

use hexxen or slayer 3.7 ?

[Ging3rguy]

Use the latest version of hexen and remember you have a winbond MB.

[archfranck]

 

i don't want to go wrong .. i did softmod ok .. i launched the dvd slayer flash section bios tsop and i chose bios 1.0-1.5. Then it doesn't make me choose anything else, 256KB or winbod, it takes me directly to the various bios m8-x2-indbios. there is ind-bios 5003 -67. 

 

AHHHH ok now use hexxen 2019

[archfranck]

correct this.. and now  chois ind bios 5003 or 5004?

hopefully he writes otherwise I have wrong welding

 

Ahhhh slayer 3.7   speack  xbox 1.1

hexxen 2019 speack xbox 1.4  this is correct..

Edited June 13, 2020 by archfranck

[SS_Dave]

IND 5004.67 is my favorite

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

 

 

[archfranck]

ok go

[archfranck]

last step  GO?

[archfranck]

 

I don't select advanced but do I proceed regularly without further options?

[archfranck]

 

then I proceeded and loaded some files and then the mask with various options opened and in the end I chose hdd bios, pointed to the file \ bios.bin which I believe had saved before .. it flashed regularly and now starts with ind-bios but with unleash, while before I had put xbmc. At this point what do I have a soft mod or a tsop ???? and clearly can i change boot dash? i prefer xbmc

[SS_Dave]

If IND BIOS is on the screen then you have a new bios.

 

Did it have XBMC before?

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

[archfranck]

yes i have choice in softmod boot dash xbmc but after flash bios i have uleash.. ok but no problem.... now i have TSOP?

All ok?

Edited June 13, 2020 by archfranck

[SS_Dave]

you can edit the config file on c drive to load the default file in the XBMC folder

 

What drive was XBMC on C,E,F?

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

 

[archfranck]

E:

[SS_Dave]

You need something like this

DASH1=\Device\Harddisk0\Partition1\XBMC\default.xbe

Part 1 = E drive

Part 2 = C drive

Part 6 = F drive

I think

 

 

Cheers

SS Dave

Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.