Jump to content

I Tsopped My Og 1.0 Today and Made a How-To Video


Recommended Posts

  • 4 weeks later...
  • 2 weeks later...
  • 2 months later...
  • 2 months later...
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By hands_groober
      Hi again
      Following up on my previous post about mt ram upgrade. Ive ran into another issue.
      I have installed a 1tb HDD. Prior to upgrading my ram I had already formated the with F partition taking 120gb and G partition taking the rest of the space. I have filled F partition with xbox games which has taken quite some time. Ive now realised that IND-BIOS 5003.67 will not read G partition.
      M8 bios will read the G partition but then i wont be able to take advantage of my extra ram. From what Ive read it is to do with how my G patition table is written. If this is the issue, is there any way I re-write the partition table without disturbing the data?
       

    • By hands_groober
      Hi
      Im in the process of upgrading my ram. The mod chip im using is an x2.6 with ind-bios. I have the xblastos xbe installed on my HDD.
      My thinking was that I could boot to my dashboard then launch the xblastos xbe to check each ram chip. However, upon powering on the xbox, it boots three times and the led's flash red and orange.
      My question is do I need the xblast bios flashed to my modchip for the xbox to boot during the upgrade or have I made a mistake during the installation?
      Im quite confident about my soldering. Checking under x60 magnification and lots of light
      tia
    • By Silver
      I installed Emustation on F drive and have set up most of my roms and box art. I also installed Ninja Massive in my F drive under Emus. How can I run Ninja Massive from Emustation? Do I have to exit the Emustation dash and then run it?

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.