Search the Community
Showing results for tags 'unlock'.
Found 6 results
As I mentioned in another thread here I recently bought a 'for parts' Xbox which is giving error 16 but the seller also included another retail HDD, almost certainly not softmodded, which is giving error 6. Pretty sure it did not come from the same Xbox so obviously locked with an unknown eeprom on another Xbox which again, obviously, I do not have. Not likely being softmodded means no master password use possible either. I've looked into methods of unlocking it and either here or on another forum somebody mentioned there are Windows programs that can do this. I'm not bothered about the content just interested in finding out if it can be unlocked preferably, via a USB connection. Any recommendations/suggestions welcome.
I hace a 300gb IDE hard drive that I used in a sodtmodded Xbox back in the day - only realized this evening that it is locked and that I no longer have the Xbox I made it for - is there anyway to unlock it - I have softmodded xboxes lying around - would they help unlock it? Thanks
Hardmod is done on 1.6 but I still have the stock hard drive , should it be locked or is there something I need to do? I have recently install kixxx emulator but have it in apps in the boot dash that hexen installed as I don't see how to put in emulators folder. Works fine just wrong location, how do I move into emulators folder? Still learning how this file system all works.
Hi guys, After softmodding my xbox with the rocky5 method, it is now time for something new: TSOP. I read a lot of inormation and prepared everything (soldered the points on my ST TSOP 1.0), and decided to go for the Hexen 2018 disc and Evox M8 (F+G) bios). After I succesfully modded my xbox, i would like to unlock the stock hdd. I know that after a TSOP mod you can swap in every blank unlocked hdd. But I can't find what kind of utility I need to use to unlock my original stock hdd..
I used chimp program, to unlock a hard drive , but when I try to lock it back up . The hard drive doesn't lock and i get error message. Is there a better way and how . thanks
Here is how to unlock an Xbox hard drive with a program called Hdat2. Software link: https://www.hdat2.com/ Software is in attachment also. It is a Boot able iso. Instructions: I've done a YouTube video showing how to unlock an Xbox hard disk with HDAT2 link here for the program http://www.hdat2.com/This is a WIP, there may be some errors I will try to update the videos and instructions over time 6th April edited YouTube video9th May 2017 v60b4, new YouTube Video and updated instructionsSet up your PC with the Xbox hard disk as Master and the DVD drive as Slave.Set the BIOS to boot from DVD/CD first.When the program loads, be patient it takes a little while Type "HDAT2" at the command prompt.Select the hard disk by using the cursor keys and pressing enter.Scroll down to "Security" press enter.Scroll down to "Unlock device" press enter.Then press "I" to change from User to Master.Pressing "K" will scroll through a list of built in passwords, if you're lucky it'll be one in the list.Xboxes are usually "XBOXSCENE" or "TEAMASSEMBLY" which are near the end of the built in password list.Press "S" to set and then "Y" to confirm.NOTE: You will only get 5 attempts, and then you will have to re-boot, and start again You can also enter a password manually by pressing "P"Passwords can be entered in User mode, but you don't get the "K" option for the built in password list.If you have "zeroed" your hard drive password then 30 HEX is DECIMAL 0.Hopefully the video will show what I mean https://youtu.be/ZnvqxgTJsfoHDAT2 also has other useful hard drive tools to repair bad sectors, erase etc...Have a look at some of the other YouTube videos by other users Video Below: hdat2cd_60b5.iso
Board Life Status
Board startup date: April 23, 2017 12:45:48