SakisTheDrifter

Is there a way to Force a BFM BIOS to set the clock speed of CPU,GPU,RAM?

The original xbox All digital huh? You should give it a try if you have spare cases

Then dont comment saying that my method belongs to 1920 and that something else should be used. I gave a solution that DOES work and thats it. All you could do was to just suggest your way as an alternative. Being nice doesnt cost,it also earns you respect

Thanks for disencouraging me from trying to help here. All i wanted to do is give the simplest solution without complicated circuits. Also i dont think that your circuit lights the led's ON when the xbox is OFF and vice versa doesnt it?

Forget about any scematic and built it on your own. Its VERY simple. Just take a + from a wire of the PSU that ALWAYS gives power(wich one depends on the PSU)connect it to a resistor for the LED,after the resistor go to one NC connection of a relay,then the other end of the NC relay goes to the anode of the LED and finally the cathode of the LED to ground. After that Connect the coil pins of the relay to the PSU but on wires that give power when the xbox is ON. That way,when you open up the xbox,the relay will power ON and open the circuit for the LED,switching it off. When you power off the xbox,the relay will power off and close the circuit,giving power to the LED Wish you luck and a good day/night

Ok my mistake there,but still i dont get continuity for pin 12

On both my 1.1 systems,the pins 12 and 4 doesnt show continuity

Having a 5400rpm drive is better for hdd temps and also for psu temps,because low rpm drives draw less current so you stress the psu less. If loading times dont bother you,then 5400 rpm is the best choise P.s Epeitelous kai enas Ellhnas

Go to settings of UnleashX and enable G drive

Yes these are the files,but still i cant get the point of them

Yes i did,but the txt file explains how to do it on a pc,not the xbox

Hello all. I cant figure out how to run this emulator(apple 2gs). I downloaded it together with 2 roms,but i cant figure out how to run the roms. Anybody has any knowledge on it?Thank you

Try playing with the variable resistor located in front of the psu. This resistor changes all the voltages of the psu,so try playing until you get 11.5v on the yellow wires and if this still dont work,then you have to spent a whole day searching what is busted on the psu. Good luck

Are the orange wires reading 3.3V?

Noise and temperatures dont go together,so its up to you what you want...... 1)A noisy cool xbox 2)A quiet hot xbox

Thank you my friend and i wish you good luck too!!!

Yes you need to have the psu outside the xbox and i would also reccomend you doint it that way,since the psu will be cooler(since it disipates the heat directly to the air and not inside the xbox) and for that reasson,the xbox will also be cooler. My pleasure my friend,i wish i can halp you as much as you need

You said you have a 1.6 xbox so here's what you ll do. You will cut the xbox's psu wires in half so that you have the plug in your hands. Next cut the pc psu wires near the plug(so that they are long enough to reach inside the xbox). Next connect the PC psu black wires to the XBOX psu plug black wires,then the PC psu red wires to the XBOX psu plug red and orange wires,then the PC psu yellow wires to the XBOX psu plug yellow wires and then the PC psu orange wires to the XBOX psu plug blue and white wires. Finally from the PC psu,take the green wire and a black wire and put a switch between them(when you turn ON the switch,the psu will power up) TIP:When you want to power up the xbox,turn on the psu first,then press the power button on the xbox

Mod a pc psu to work with your xbox. No need to wait for orders,making deals and your xbox will even run cooler(small gain,since you already have low ambient temperature )

480p and its the only game doing that. I dont believe its a hardware problem since this problem happens on all 4 of my xboxes

i mean that i use flicker fucker to set the flicker filter to 0

Hello people. I have a weird problem here. In the last few days i noticed that Forza randomly freezes(3-10 minutes of gameplay),but if i play it with the default xbe not patched with flicker fucker,the game runs fine.This problem happens to all 4 of my xboxes. I remember that in the past i used to play it fine and i think that it was also flicker fucker patched. Any idea of what the problem would be? Thank you

So the solution is to find a way to format with 64KB clusters instead of ER right?

Ind Bios 5004

If i do it,it will say ER to partition F again