Jump to content
OGXbox.com

Ging3rguy

Members
  • Posts

    837
  • Joined

  • Last visited

  • Days Won

    11

Everything posted by Ging3rguy

  1. If it is unlocked try using fatxplorer and see if they did a backup of the eeprom/hdd key, if so you could use xboxhdm to lock it or use another chipped Xbox to check the files by booting to an install disk and using file explorer.
  2. It’s not you just needed to set it up before you started the ram upgrade. Do you have access to another Xbox? You need to setup you xenium as Dave suggest, Xblast can then tell you if the extra chips have been installed okay.
  3. Did you use Xblast bios to check each chip as you installed it?
  4. The Xbox should cut out at approx 72c to protect the components, if it is doing this I would change the thermal paste and maybe think of running the box at a higher fan speed, it will just be a bit nosier.
  5. Okay then it is probably a soft mod, use chimp to clone your drive to format and clone your c and e partition. Here a how to.
  6. Easy way to see if is a chip is to open it up. If you have the new hdd already put it in the Xbox and turn it on with Hexen in the dvd drive, if it asks you if you want to format the new drive it’s a hard mod.
  7. Hiya, do you have a hard or soft mod as the upgrade procedure is different?
  8. Hiya, if you are thinking of turning your Xbox in to an emulator, emustation is a really nice front end dash, it is a sister/brother to xbmc4gamers.
  9. As SDD says check the pads for a short, I did a ram upgrade and it would turn on until I removed a solder bridge.
  10. I would try and pm psyko over on this site and see if he can help. https://www.obscuregamers.com/threads/mod-aladdin-xblast.505/
  11. Ging3rguy

    Matt

    If you want to stick with the softmod you just need to use xboxhdm and a copy of your eeprom/hdd key to lock your drive. Here's a video that show using xboxhdm to build a drive but you would just need to lock yours with your hdd key. https://www.youtube.com/watch?v=y_n8kEQfgdE&t=280s You could always back up the game drive to your pc using fatxplorer before you try anything.
  12. Ging3rguy

    Matt

    When you say you have a hdd with a load of games on is it formatted with fatx for the Xbox or ntfs for a pc which you plan to transfer to the Xbox?
  13. When you removed Rocky5’s softmod did you reformat the drive and do a new hdd install?
  14. Use enigmah in your apps folder, hexen should have put a copy there if not use hexen to install it. Once you have set that to ntsc, reboot and load the m$ dash via unleashx, navigate to video and make sure you have the option to use 480 and 720.
  15. The duo as Dave mentioned in an earlier post comes with 1 bank a 1.6 and 1 for the rest when sold so the other bank has not been reflashed that is why it frags. If you have a pal box set to pal it should run your pal disks, try changing the video from ntsc to pal with enigmah. Are you using unleashx as your mod dash?
  16. It’s going to be a software problem, is your other Xbox a hardmod, if so make sure that both the hdds are unlocked and swap them, that will tell you if it is a software issue. you could then just clone your c an e partition from the working hdd.
  17. Just use some solder braid and plenty of flux to remove it.
  18. You could try stripping it right down and sticking the plastic in a dishwasher. Mr Mario has a video on you tube doing this with a Nintendo with good results.
  19. Hi, is the yellowing all over or just in one area, if it has been left in a room where sunlight has caused it I don’t think you will have much luck cleaning it.
  20. Pretty sure it will be a solder bridge, try using a meter to check for continuity where there shouldn’t be any.
  21. When say did have modchip in it, is it still there? Check that the D0 is still attached, are there any other wires attached?
  22. Swap the drives when you can so you can narrow the problem. Do you know what bios you have on the duo, try the other bank and see if you have the same issue.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.