SS_Dave

Hello SickVoodoo I have not seen the happen since VCR's where the thing to have. Have you tested it on a different tv/screen? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Welcome 65c102 If you can't find what you're looking for just ask there is a wealth of knowledge here. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

What hard drive are you trying to use New or Used? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

If you have fitted a mod chip why not just use a install disk(Hexen,Slayers) to set up the hard drive. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Hello 65c102 Where are you setting the clock? MS dash ? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Hello Yves Welcome to OGXbox There is plenty of info here and if you can't find something just ask. I have a Xbox I picked up with a huge 80 gig drive but back in the day what would have cost a lot of coins. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

I hope that's not your soldering I had a 15 year work experience person do better than that. The black circle could be shorting to the traces underneath that blob and the red circle looks like it's almost touching there would only be a hair in it. There must be a problem with the soldering to need the wire from pin 2 on the LPC linking it to ground around the screw. I would not have fitted it like that as it's the lazy way and doggy, I always use a pin header it would have been supplied with. Fix that and see what happens. Edit: The wire on L1 is not needed so you could remove that if you wanted as well. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Are the friggin hexen strikes again The dash self changing was one of the reasons I don't use Hexen and try a x2-5035 bios to see if the Xbox starts working properly Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

This may help you start tracing the signal. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

I was a version 1.6 ? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

It is really hit and miss with the wii2hdmi. I use the HDMI kit from N64 freak in my own boards and there is a huge difference in price but as the saying "You get what you pay for" Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

What Bios did you flash? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

As far as I can tell there is at least 3 versions of the wii2hdmi and not all work with the Xbox correctly Apparently this version chip is BAD Also check your ground Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Hello marmet45 There is no way via software to check the TSOP flashing enable links, You can try and flash the TSOP and the worst that will happen is a Message saying the flash not writeable. And the BIOS check program that's kicking around is as useful as a ashtray on a motorbike. If you hardmodding (flashing the TSOP chip or adding a Modchip) there is no need to Null the HDD key as the drive can remain unlocked. Plus I never lock any of the hard drives I use and the 1st thing I do after a hard-mod is unlock the hard drive. With the clock cap yes the version 1.0-1.4 are all in the same location and some of the 1.4's may have a gold colored cap but I still remove it anyway. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Sure https://www.dropbox.com/sh/jleq657tytj1r4z/AABlwLFIOgEmXF9GUGtN0ttta?dl=0 You may need to rename it to eeprom.bin Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

I have tried a Samsung 860 EVO 1tb SSD but because I the speed is limited by the ata 66 (pata)structure I could not justify the cost over the gains. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

The 750gig will be fine the heat and load from a hard drive is nothing to worry about. Just while the Xbox is apart give it a good clean especially the fan and the CPU/GPU heatsinks. In my Xbox's I set the fan speed to 30% and I don't have any overheating issues. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Is your Xbox Softmodded? Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

When you say the dvd cable i assume you're talking about the yellow 12 way Is the Xbox modded ? and how Tsop flash,Mod Chip,Soft Mod. and what version Xbox? What kind of short happend ? Did the cable get sorted to the shilding , wires shorted together , A pin in the socket on the board bent and touching. It probably help if you posted a pic of the damaged. Green/Red Flashing Problem: The Xbox will restart twice, and then flash red and green. This is known as the FRAG and can be caused by many reasons. Typically when you receive this error you will not have any video. Possible reasons you may get this is a bad bios image, a bad bios chip, the Nvidia MCPX chip is damaged, broken/damaged traces or solder splashes on the mother board. Fix: If you were doing any kind of soldering work (adding a Modchip or other type of mod) on or around your motherboard, make sure there are no solder splashes or that there are not solder bridges connecting any traces. If there are, desolder them. If you have not done any kind of modding to the unit, then its likely to be caused from a bad tsop image, or a bad chip. Try installing a Modchip to see if you can get the unit to boot. If the Xbox still gives a FRAG then it means another major component is bad and the motherboard needs to be replaced. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Maybe but try and find a 1tb or 2tb 5400rpm hard drive My 1.6 runs a 2tb without any overheating and even the 120 gig IDE drive's are 7200, If your really worried about heat use a SSD. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

I bid 2 rolls of poo tickets 3 rolls if you include post and packaging. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

This was removed from a version 1.4 yesterday. On the left is what it looked like in the board and right is the bottom of the cap. And the 4 traces along the front where corroded to the point the Xbox looked to have a dead power supply . Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

This place has complete kits and the cost is competitive. Or Digikey thats where I get mine but I get enough to do 4 or 5 Xbox's https://console5.com/store/cap-kits.html?console_type_revision=265 Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

1 more pic of this location. And if you have a multimeter can you measure the 2 red wire they should be close to 5 volt each and then test the 2 green wires and you should get around 3 volt with a controller plugged in and 0 with out and lastly all the others wires should read 0 volt Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

Your looking for WDIDLE3 program. Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.