Benur75
Members-
Posts
148 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Calendar
Store
Everything posted by Benur75
-
Please send some photos from both side a mobo. bye
- 8 replies
-
- red/orange
- flash
-
(and 3 more)
Tagged with:
-
Good evening, I use exactly the same adapter as STEO1024. I have no problem or lags. But because I am a bit perfectionnist, I always change the two caps by panasonic caps, and had a solder bridge in order to remove the jumper. bbye
-
Hello, if you have a 1.0, you have a second pinout. If you have a newr board until 1.4, you can solder a 3 pin socket. bye
-
Welcome KenMoe, pleased to see some new friends. May you speak a bit of french ? Don't worry we all speak english here. Pleased to help you if you need. I repair also Xbox for many years, but I am here for not a long time. My wife will kill me, I have 14 xbox to sell, it takes a bit of place !!!! The last one was a challenge, corosion, needs to re-wires 3 of the 4 wires under board, two tracks were burned because of clock capacitor leaked, and caps needed to be partialy replace. bye Stéphane
-
Hello guys, sorry for this non fair reply. You are right, if some wants to pay for it, no problem. bye
-
Hello, Does the xbox works properly when you switch it on ? Can you confirm that this is the original PSU ? If yes, check with a multimeter if all outputs are correct. The most iimportant is the 5V, it has to be set between 5 and 5.1. Is it a foxlink or a delta PSU ? Could you share a picture without HDD and CDROM installed ? Bye
-
For the price, I just need a bit of money to goes on repairing xbox, I don't know why but my spirit needs to repair xbox !!!!!!. So send me an offer, If you want to pay too much, I will tell you. The first correct price will win it. Send me a PM for your offer bye
-
Hello, you can't ask so much for this. Check prices please before posting sales with incorrect prices please. Bye
-
Are you sure you flashed a 1.6 bios like Evo bios ? Because you may know that you have to flash a specific bios when using a 1.6 Xbox. Bye
- 41 replies
-
- xbox classic
- muppetx
- (and 8 more)
-
I sell this Xbox 1.0in crystal case: is is 128 Mb Upgraded TSOP Flash (1 Mb) onboard 250 Gb SATA with adapter ( Virtua cop and Coinops 8 Massive on hard disk) no rust, full case cleaned For people who wants to keep it a lonhg time. I also put a chineese componanent cable, and a chineese joystick. If you want to make it greater, you could had HDMIusing N64 Freak solution. Send a PM for your price. I am in France, European shipping possible. Paypal accepted.
-
IS it a Delta psu or a foxlink psu ?
-
Hello, do you use original HDD or a SATA HDD with an ide to SATA adapter ? If yes, do you use a 80 pins ide Ribbon ? Can you check if your cpu capacitors are fine ? Can you check if the 5volts outgoing power supply is at least 5v, a 5.1v is a good value. Bye
-
Hello, i would do the same. Bye
- 1 reply
-
- coinops
- installation
-
(and 1 more)
Tagged with:
-
XBox Classic (V1.0) Gpu Heatsink W/O Cooler
Benur75 replied to TwiSteR's topic in General Xbox Discussion
If you still need heatsing, just ask me, I am in France, and have some CPU and GPU coming from dead board. Bye -
For all version except 1.6, you can use IND 5004.67 or IND5003.67 If, this is for 1.6 and later, you have to use EVOX M8 PLUS 1.6 CEF They are both 256kb bye
-
Which version is your Xbox ? I have a lot of motherboad already TSOP if you need. Just confirm by looking at the video chip and the power supply connector. bye
-
I confirm Samspin reply, you can either use a modchip time to change/reload software and relock HDD, else you can use ponyprog and a serial reader (on a old laptop for example) to catch your eeprom in order to prepare a new hdd with XBHDM. I think, it's quicker add a modchip. I which country are you ? Bye
-
Hello, I have a lot a questions to help you: Which bios do you use on your alladin ? Evox 1.6 ? Which dvd drive brand do you use ? Some reads only DVD-RW, other reads only DVD-R ... Don't you forget to use an ATA 100/133 ribbon ? Did you cross HDD, on the one you need is lock on another console ? bye
Board Life Status
Board startup date: April 23, 2017 12:45:48