sayon Posted May 21, 2019 Report Share Posted May 21, 2019 I mounted a Nexus 70mm Real Silence fan purchased in America and I am fine. It adapts perfectly to the original base without the need for any changes to the case. temperatures after 2 hours of use from 50 to 55 degrees. 1 Quote Link to comment Share on other sites More sharing options...
CorpusDeal Posted December 16, 2019 Report Share Posted December 16, 2019 On 1/19/2019 at 4:08 PM, Viggen66 said: As you know, the stock fan of original Xbox is quite loud, and given the age about 15 to 16 years I decided to upgrade/replace the fan, read some forums and some suggest the Nexus 70mm Real Silence fan, which has an airflow of 21.1 CFM, but since I'm from Europe this fan is not available almost in no place, owing probably to being an older fan design, looked for alternatives, and some suggested a Noctua 80mm which we need to butch the HDD plastic bay to fit on the box, but there's also a 60mm model, which fits excellently which is NF-A6x25 FLX. that address an airflow of 29,2 CFM which is better than the first solution Nexus 70 mm. The Noctua NF-A6x25 FLX actually has an airflow of 29.2 m³/h, which is about 17.2 CFM (29.2 * 0.589). I don't think it's a deal-breaker in any way, but something to keep in mind when evaluating the fans performance. I'm planning on making a 3D mount for the Noctua 60mm in hopes that the airflow can be improved, even if ever so slightly. It should improve the air-seal around the fan and allow for slightly better air flow. Quote Link to comment Share on other sites More sharing options...
Conker Box Posted February 1, 2022 Report Share Posted February 1, 2022 I hope this helps anyone out! This is a great case fan replacement https://www.amazon.com/gp/aw/d/B003PNLRLU?psc=1&ref=ppx_pop_mob_b_asin_image#atwl_secondary_view_1643758310731 This is a great fan for a 1.0 bord with GPU fan slot https://www.amazon.com/gp/aw/d/B009NQLT0M?psc=1&ref=ppx_pop_mob_b_asin_image Quote Link to comment Share on other sites More sharing options...
big F Posted February 2, 2022 Report Share Posted February 2, 2022 7 hours ago, Conker Box said: I hope this helps anyone out! This is a great case fan replacement https://www.amazon.com/gp/aw/d/B003PNLRLU?psc=1&ref=ppx_pop_mob_b_asin_image#atwl_secondary_view_1643758310731 This is a great fan for a 1.0 bord with GPU fan slot https://www.amazon.com/gp/aw/d/B009NQLT0M?psc=1&ref=ppx_pop_mob_b_asin_image Been using that brand fan in PC’s for a while now, they are as good as the reviews say. Is that a 3D printed mount? 1 Quote Link to comment Share on other sites More sharing options...
Conker Box Posted February 4, 2022 Report Share Posted February 4, 2022 Yes sir! The mount is costume made from a shop on Etsy called "Costume Xbox Direct" for this particular fan. He is costume printing parts for my hard moded Xbox. The guy is great to work with. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.