sayon
-
Posts
35 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Everything posted by sayon
-
Thanks, I'll try to do what you said too. Then I'll let you know if I'm solved.
-
My xbox is 1.4
-
Hello, yes I have already done what you suggested, I programmed Arduino as explained on the official page of Ryzee119's github. In fact it is for this reason that I do not explain this inconvenience. If it were a bug on ghitub it would explain it ... instead it says nothing. As components I used these:
-
it should look like this ...
-
Good morning guys, i bought a ryzee119 OpenXenium chip and installed it on my xbox 1.4. Everything perfect ... I bought the spi2par2019 kit and the LCD display and after I installed it it has the problem that it marks the degrees with the abbreviation aC and not as it should (° C). Has it happened to any of you? Do you have a solution?
-
it was thought to use 2 hds of 2 tb each of 2.5 normal inches (2 tb ssd cost a lot). however I will surely carry out the method you described or buy a two-way switch like some other users did.
-
excellent description. I would like to have a hard drive for games and one for separate emulators. But mine is also a desire to question myself with making the changes.
-
Hi, has anyone managed to get 2 hard drives working on his xbox? The method that I would like is the one via switch, with the DVD player that continues to work and no bios without dvd ceck. I have already read a discussion about this topic, but those who managed to do so did not post links to the material used or even photos. If anyone has any advice and is welcome.
-
ok, modified the backup bios with evtool setting the fan at 90%. Now it constantly runs at this speed by launching any application or game (emulators, etc ...). Thanks again for the advice.
-
-
is the right procedure? Obviously all the other parameters of the bios except the fan speed (100) and bios size (256k) leave them unchanged right?
-
6) launch the EvoX dash in the xbox and use the FLASH utility. I select the modified bios and flash
-
5) once saved the bios modified with evtool via ftp I'm going to put it in the bios folder of the Evolution dash program that is in the zbox
-
4) I change the fan speed from 20% to 100% and verify that the bios saving size is 256k
-
3) this is evtool with the backup of the loaded bios
-
2) on the PC launch evtool 1.0.9 and load the bios.bin backup
-
So ultimately I have to do the following steps to change the fan speed and keep it constant: 1) Xbox bios backup via EvoX Dash
-
this is the chip I have on the xbox
-
Hi, this is the situation of my hard drive on the xbox
-
Now I go to work. then I'll take a picture of the situation on my hard disk. Meanwhile, thanks for the help, see you later
-
I have a 2 TB hard drive in 2 partitions F: and G:
-
so if the bios.bin backup size is also 1 MB, after I make the change I save it with a size of 256K right? last thing ... regardless of whether I reload the bios M8 or the iND-BiOS Feb-11-05 Beta (aka 5004) .67 version nothing happens to the current configuration of the boot and recognition of my games and emulators?
-
sorry if I ask so many questions ... but I would not be wrong
-
questi sono i file di backup creati con EvoX. Come puoi vedere il file bios.bin ha una dimensione di 1 MB, secondo te dopo aver apportato la modifica della percentuale di velocità della ventola e gli ho detto di salvare, quale taglia dovrei scegliere?
-
what you see in the picture is my uploaded bios. The fan is set by default to 20%, according to you how much can you set it? I just have to change that value and that's it right? I change the percentage and click on Save as. After reflasho the bios again
Board Life Status
Board startup date: April 23, 2017 12:45:48