Jump to content
Sign in to follow this  
Fixified

Tsop 1.0 Og XBoX

Recommended Posts

Hello! So after some suggestions from people here on the forum, I decided to attempt TSOPing my 1.0 xbox.

Now, I haven't soldered for 4-5 years, and haven't touched an xbox since I moved abroad (have now moved back), so I don't remember much about the whole process.

Didn't want to wait for flux because it wouldn't arrive for another 3 days, so I did the bridging without it. (Success btw)

 

Now, for the flashing part, I'm wondering what bios you guys would suggest as the chip has a 1mb bank,

and which CD you would recommend for setting the whole thing up (Hexen, Slayer etc). 


I know this is a bunch of NoOb questions, but I haven't been in the scene for a couple years.

Looking forward to your replies!

 

- Fixified

Share this post


Link to post
Share on other sites

Hello Fixified

 

I have a preference to the X2-5035.67.bin for the 1.0-1.1 and the IND 5004.67.bin for the 1.2-1.4 ann=d last but not least the EvoxM8+.67.bin for the 1.6

As for flashing I use either raincoat or Xblast.

Please login or register to see this link.


Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Share this post


Link to post
Share on other sites
1 hour ago, Fixified said:

Hello! So after some suggestions from people here on the forum, I decided to attempt TSOPing my 1.0 xbox.

Now, I haven't soldered for 4-5 years, and haven't touched an xbox since I moved abroad (have now moved back), so I don't remember much about the whole process.

Didn't want to wait for flux because it wouldn't arrive for another 3 days, so I did the bridging without it. (Success btw)

 

Now, for the flashing part, I'm wondering what bios you guys would suggest as the chip has a 1mb bank,

and which CD you would recommend for setting the whole thing up (Hexen, Slayer etc). 


I know this is a bunch of NoOb questions, but I haven't been in the scene for a couple years.

Looking forward to your replies!

 

- Fixified

Just check your tsop to check what it is before you try to flash it.

Share this post


Link to post
Share on other sites

Thank you for your replies!

What I've done for now:

  • Flashed X2-5035.67 bios to TSOP (Successfully)
  • Cleaned CPU/GPU and applied fresh thermal paste.
  • Cleaned motherboard/fans/case.
  • Removed clock capacitor.

What I'll be doing next is to figure out which dashboard I want to be using and upgrading the HDD to 1TB.

I just have to wait until I receive my PATA TO SATA adapter.

I'll also be receiving another XBOX some time next week.

Thanks for all the great help!

- Fixified

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By Nicholas Stucker
      Look at this on eBay
      Please login or register to see this link.
    • By GamerID80
      Hi all, just wanted to start a thread regarding my Crystal Xbox Original as its modded with Evox chip and only loads the Evox boot when the chip is enabled and I also press the LED pins with my finger (very odd, no?) I've included an image to show what I mean. The chipped Evox works in this case but wondered if there's anmything I should do?
      I'm also considering selling it once working. Thanks and cheers for the advice.
      GamerID80 - Also on the Facebook group.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
    • By Maladin
      Just picked up 3 defective Xbox 360s for $5. Hoping the RF boards will be good to connect 360 controllers to the og

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.