I've done tons of these, and I have some boards left over. If anyone wants it would be 90 shipped each board anywhere in the us. I don't have any rep in this forum but I have an ebay account with a bunch of reviews and I've done a few trades over at r/hardwareswap.
hello all, im playing some Forza Motorsport the NTCS version and the collection of trainers i have only has a couple PAL versions for this game and they don't work with my version of Forza, so im trying to figure out how to make my own, i have setup an old laptop with windows xp and found a version of the XDK and installed it, can anyone help me out with this? should i try to make a evox trainer or some other format that is compatible with xbmc4gamers ? thanks in advance
Got a version 1.0 that is flashing orange (high temp) immediately after power up. ADM1032 chip looks good and meters out fine for power and I2C bus connections, but when I throw a logic analyzer on the bus, it never returns a READ response.
1.958481000000000,I2C,Setup Write to ['152'] + NAK
1.958792500000000,I2C,Setup Write to ['152'] + NAK
1.959192000000000,I2C,Setup Write to ['152'] + NAK
1.959548000000000,I2C,Setup Write to ['152'] + NAK
1.960861500000000,I2C,Setup Write to ['152'] + NAK
Compare that to a "good" box I have than returns both MB and CPU temps over and over during the boot process.
1.069577000000000,I2C,Setup Write to ['152'] + ACK
1.069807500000000,I2C,'1' + ACK
1.070072000000000,I2C,Setup Read to ['153'] + ACK
1.070300500000000,I2C,'24' + NAK
1.070584000000000,I2C,Setup Write to ['152'] + ACK
1.070815000000000,I2C,'0' + ACK
1.071078000000000,I2C,Setup Read to ['153'] + ACK
1.071306000000000,I2C,'23' + NAK
Before I replace it, any other thoughts? Clock cap was still on the board, but actually looked pretty good (minimal leakage), and the ADM1032 and surrounding area has been cleaned several times with IPA.
Board Life Status
Board startup date: April 23, 2017 12:45:48