Arnes269 Posted June 5 Report Share Posted June 5 I bougth broken og xbox 1.6 for repairs when i try boot xbox he blinks green lights three times and then flashing red/green .i open up and see that xbox was modded with super aladin modchip live when i delsoder wires from modchip xbox boot up with error code 05 so i redo soldering on xbox and i saw that there was not cut trace u7c1 so i cut and xbox begins again fraging here picture of soldering lpc and modchip what do next did i need buy new modchip swap or console is not fixable https://ibb.co/JsmkYR2 https://ibb.co/yFBtCPR https://ibb.co/pdxkJRN Quote Link to comment Share on other sites More sharing options...
MadMartigan Posted June 5 Report Share Posted June 5 Honestly, those solder joints don’t look very good. Are you applying flux before soldering? How hot is your iron? Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted June 5 Report Share Posted June 5 As you have cut the Lframe you don't need the D0 wire anymore and I would remove it. It looks like you could use some Flux paste and I hope you are using 60/40 leaded solder Add some flux to all the pins and reheat each one. I also suggest you have a read here. https://learn.adafruit.com/adafruit-guide-excellent-soldering/common-problems Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Arnes269 Posted June 6 Author Report Share Posted June 6 I resolder all solder ponits xbox still fraging here pictures https://ibb.co/V23Mxk0 https://ibb.co/VtV1vwt Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.