Search the Community
Showing results for tags 'showing'.
Found 5 results
I have (purchased from a friend) a x3ce modded Xbox that boots into XBMC and it has a 2tb HDD installed. He has about 330 Xbox games in folders on the G partition, and it's running out of room. I have another 300+ games that I would like to install to F and just wanted to see what needed to be done to get all the games from F and G to show when I click the "Games" tab. Is the a CFG file I need to edit in XMBC or am I stuck with 2 separate sources (Games and Games 2)? I hope I explained that well enough. Thanks in adavance.
Hello everyone! Hoping to get a bit of help with two small issues. Using UnleashX with the green block theme, but having the same issues without regard to the skin selected. First is that if I use the two triggers and the far left / far right buttons (back and something else) to return from a game to the main menu, the XBOX crashes with error 07. Power off and power on cycle sets thing right, but strange that it crashes just because I try to go back to the menu from inside a game. Second is that loaded games don't automatically show up in the "XBOX Games" menu. For example, I've burned a disc over to the HDD and also copied one through FTP. In both instances, I had to go into the game through File Explorer, start the .xbe file, and then go back to the menu to see the game in the games list. Any ideas? Thanks everyone! Blaine
Hiya, just TSOPed my 1.2v Oxbox and put in a 160gb hdd. I split the F & G partitions 74ish gb each. The F partition show 74ish gb but G partion is 0gb. Used HeXEn 18 and the evox M8+ bios F+G, Both F & G values showed in XBpartitioner 1.3.
Hi, First time modder here having some issues with the setup after upgrading the hdd. I have a modchipped v1.6 OG XboX and set it up with a 160 GB IDE hdd using the Hexxen 2018 disc. I also switched to a 80-pin IDE cable. The install went well, and I have uploaded games via ftp and can play them from the hdd. I then created a Emulator folder on E:\ and put a N64 emulator there (Surreal64CE B6.0), and the roms in the Roms folder, but the Emulators-'tab' is not showing when starting the XboX. I installed XBMC from the Hexxen 2018 disc, but there is nothing showing under the System\Emulators tab in XBMC. Also the display in XBMC is too large for the tv-screen, and changing the options (Normal/Widescreen/Letterbox) does nothing. The bullet options for 460, 720 and so on in XBMC display settings are greyed out, and I cannot use them. This is also true for the display settings in the XboX Admin/Settings in the dash which shows up when I start the XboX, but I got a correct display after disabling Pal-60. Last, I am not able to set a static IP address when switching from DHCP to static. I can input the new IP, but when I click OK, it still says IP: 0.0.0.0. The display and ftp issues are not serious per se, but I would like it all to be in working order, and not being able to play the emulators is a bummer. I have bought a 2TB hdd, and am currently waiting for a Startech IDE to Sata adapter to arrive, and was hoping to have it all working when upgrading to the Sata disk. My option now is to try the whole procedure again and see, but don't know if it will make any difference... Can anyone please help point me in the right direction to get it all working as I would like? -Thank you.
Board Life Status
Board startup date: April 23, 2017 12:45:48