Search the Community
Showing results for tags 'showing'.
Found 13 results
-
i modded this xbox several years ago and it was working great. i installed an alladin chip on it and got tired of the limitations it caused. so i ordered an open xenuim chip for it and thought that i could just unplug the alladin and plug the OX chip in it's place and everything would work perfectly. however, i'm not getting a picture on the screen of my tv now. when i press the power button, the green eject button flashes a couple times and then stays solid green. what am i miss here? does the OX chip need to be wired differently than the alladin?
-
as title says i replaced my og xbox harddrive with a 500giig ssd and after i cloned it, only shows 123 gigs using a startech ide to sata, with a 80wire cable
-
So I'm finally upgrading the HD in my second OGXBOX. After initial issues, I was able to get HeXen2018 to load. I went through the process and chose to have the whole ~1TB for the F. After the process was complete and I booted up into UnleashX I noticed the f drive wasn't showing the full space. In fact it's a hell of a lot smaller than expected. Instead of the ~1TB it's showing 123,408.52 MB for the F. I attached a picture below. Thoughts? FYI it's hard modded with a Xenium ICE.
-
I am using xbmc emustation and scummvm emulator. When looking at scummvm on the dashboard it shows how many games you have playable. However I have games in there and they aren't showing up in the list. However if I go into file browser and just start the scummvm default.xbe to launch the emulator, I can load the game just fine and play. Is there some kind of disconnect in how xbmc emustation is seeing (or not seeing) the game?
-
Hi guys i have a problem, i just filled up my new hdd. When the dash loads it shows on f and g 0,0 free and when i go to file explorer it shows nothing in f and g. I put in the hexen disc and in hexen the f and g shows the correct amount of free space and all the games and emulators are appearing in the f and g and i can play the games. The xbox has an old Smartx chip
-
just got another xbox and after softmodding and TSOPing it, both temperatures show 0.00C. any idea why? it's a 1.1. clock cap leaked but the acid did not reach the ADM1032 chip. there's a lot of rust in the cage though, and a nasty dent on the board near the power suply.
-
Hey guys, happy new year! A few months ago I was given an original Crystal Xbox. As someone who has always been on the Sony side of consoles, I admit, I don't know much about Xbox. However I was told that the Xbox was running EvoX (Can be confirmed, when I turn the Xbox on, there is an EvoX icon on the left hand side of the boot screen) and that the Xbox had a modchip inside. The Xbox has been sitting under my bed for a while and I thought today I would dust it out and upgrade the internal HDD. The IDE hard drive inside the Xbox was only 80GB and I had a spare 250GB IDE hard drive I wasn't using. -- So I went ahead and followed this tutorial: Basically I downloaded Hexen 2018 > burned the image to a DVD > put the DVD inside my Xbox > replaced the old IDE HDD with the 250GB one > booted into Hexen 2018 > went into Disk Upgrades > From there I followed the process. After the files had copied over from the DVD, XBPartitioner 1.3 booted up and I made sure that I set the F drive to the full 250GB. From there the process was complete. I took the Hexen 2018 DVD out of my Xbox and the UnleashX dashboard popped up. BUT when I look at the drive details on the upper left corner. I can see that there is only around 120gb free on (F:). Whenever I try to boot XBPartitioner from the dashboard menu, I get the following error: "LBA48 info not found! Custom Partitions will not work with this BIOS! Update your BIOS to one which supports at least LBA48 version 2." I done a bit of research and it LOOKS like I need to update my BIOS. But honestly as someone who has no clue what they're doing, this frightens the hell out of me. So that leads me to this post... I'm looking for some help which can preferably be explained in as simple detail as possible, I literally need someone to spoon feed me the steps. I would be so grateful and appreciate it! EXTRA INFORMATION - If I load into the EvolutionX dashboard I can see the follow details, which might be relevant. BIOS: EvoX M8 (1.6) Kernal: 1.00.5838.01 EvolutionX V+3935
-
ive downloaded all the games which is 2 terabyte (torrent on aracde punks) installed half of the games on E: and half on F: installed xbox artwork installer, however its scans all games from E: drive and F: drive. But the F: drive game covers wont show up. please help as is coming up with blank images
-
Hello everyone! Hoping to get a bit of help with two small issues. Using UnleashX with the green block theme, but having the same issues without regard to the skin selected. First is that if I use the two triggers and the far left / far right buttons (back and something else) to return from a game to the main menu, the XBOX crashes with error 07. Power off and power on cycle sets thing right, but strange that it crashes just because I try to go back to the menu from inside a game. Second is that loaded games don't automatically show up in the "XBOX Games" menu. For example, I've burned a disc over to the HDD and also copied one through FTP. In both instances, I had to go into the game through File Explorer, start the .xbe file, and then go back to the menu to see the game in the games list. Any ideas? Thanks everyone! Blaine -
I have (purchased from a friend) a x3ce modded Xbox that boots into XBMC and it has a 2tb HDD installed. He has about 330 Xbox games in folders on the G partition, and it's running out of room. I have another 300+ games that I would like to install to F and just wanted to see what needed to be done to get all the games from F and G to show when I click the "Games" tab. Is the a CFG file I need to edit in XMBC or am I stuck with 2 separate sources (Games and Games 2)? I hope I explained that well enough. Thanks in adavance. -
Hiya, just TSOPed my 1.2v Oxbox and put in a 160gb hdd. I split the F & G partitions 74ish gb each. The F partition show 74ish gb but G partion is 0gb. Used HeXEn 18 and the evox M8+ bios F+G, Both F & G values showed in XBpartitioner 1.3.
-
Hi, First time modder here having some issues with the setup after upgrading the hdd. I have a modchipped v1.6 OG XboX and set it up with a 160 GB IDE hdd using the Hexxen 2018 disc. I also switched to a 80-pin IDE cable. The install went well, and I have uploaded games via ftp and can play them from the hdd. I then created a Emulator folder on E:\ and put a N64 emulator there (Surreal64CE B6.0), and the roms in the Roms folder, but the Emulators-'tab' is not showing when starting the XboX. I installed XBMC from the Hexxen 2018 disc, but there is nothing showing under the System\Emulators tab in XBMC. Also the display in XBMC is too large for the tv-screen, and changing the options (Normal/Widescreen/Letterbox) does nothing. The bullet options for 460, 720 and so on in XBMC display settings are greyed out, and I cannot use them. This is also true for the display settings in the XboX Admin/Settings in the dash which shows up when I start the XboX, but I got a correct display after disabling Pal-60. Last, I am not able to set a static IP address when switching from DHCP to static. I can input the new IP, but when I click OK, it still says IP: 0.0.0.0. The display and ftp issues are not serious per se, but I would like it all to be in working order, and not being able to play the emulators is a bummer. I have bought a 2TB hdd, and am currently waiting for a Startech IDE to Sata adapter to arrive, and was hoping to have it all working when upgrading to the Sata disk. My option now is to try the whole procedure again and see, but don't know if it will make any difference... Can anyone please help point me in the right direction to get it all working as I would like? -Thank you.
-
I just upgraded my HDD to 2tb. Everything is working fine but I noticed, in unleash X the MS dashboard option is not showing up. I guess it was deleted in the install. How do you reinstall it. Thanks
Board Life Status
Board startup date: April 23, 2017 12:45:48