Search the Community
Showing results for tags 'locked'.
Found 12 results
-
I was FTP'ing stuff to my 1.6, it was going for about 14 hours OK then it locked up, I turned it off and on and it tried to kick in twice by starting to go green then restarting before anything comes on the screen then the third time it started the light flashing from green to red I thought maybe my mod chip was playing up so I desoldered it and tried the Xbox, exact same behaviour, no signal to screen and flashing red and green.. The boards had all new caps only a few months ago. What could it possibly be? I looked at the board under zoom on my phone and can't see any obvious signs or problems anywhere. -
Or maybe i locked it in my inexperienced days? Anywhoo im curious as to if there is a way to unlock said drive without the eeprom..i still have the board but no power supply for it as i abandoned it and went to work on my 1.6 but i do still have the mobo and associated sister boards. Is my only hope resurrecting the 1.4 board or can i pull the eeprom without power to it? I have an Aladdin chip if i need to go that route...any help would be appreciated. -
Can anybodybody help? I think the problem is so new that there is nothing on Google about it. I ll keep it short. I softmodded with Rocky 5 and changed all HD keys to 11111s. The message mentions insignia and it not working if previously signed up. Well I did nt re boot after the softmod and of course quickly registered for insignia. I cannot get in . Kicking myself as i bought and restored a crystal xbox especially to try insignia this weekend and fell at the last hurdle. Any ideas? Thanks?
-
So after installing the mod chip and uninstalling the mod chip. the hard drive i forgot to lock. now im getting error 5 means it needs locking. i do how ever have another modded xbox. can i put the hard drive in the modded 1 . lock it using the tools and put it back in the unmoded console again any help please. just need to get it locked again
-
I have just FTP'd CoinOps 8 over to my newly mod chipped Xbox but there is no Emulator option in the menu so I can't load it. I can see an option to 'format' menu but it asks for a password to be entered to access it. Also I have 'HeXEN tools' and 'Ndure tools' but these too require passwords, although these require pressing buttons in the correct order. Is there any commonly used passwords I can try to use or should I contact the seller I purchased the modchip off about this? -
So I got a soft modded console with Maxtor 40GB IDE drive, listed as working. Got it, plugged it in, browsed around for maybe 5 mins and then it just crashed. The board is now dead and the HDD is locked. Being locked I know my options are already limited. I basically just want to format it completely and rebuild it for use on another machine. Here’s where I run into the major issue. I first tried my OpenXenium Xbox to try and unlock the drive. No luck it won’t let format or any of the options available. I just get an error saying it couldn’t complete it yada yada yada. I was however able to sign into the drive with FTP and it’s completely empty. Hexen won’t boot since I can only get as far an error 9 with a locked drive. PC does not recognize the drive at all when plugged in via IDE to USB adapter. FYI, It does have a power source running. Where can I go from here? I hate to throw away a 40GB drive if it’s salvageable. If it’s dead, then so be it.
-
So I was just going to format my hdd for other use then suddenly BAM! xboxhdm hotswapped the drive wiped partition forgot to unlock what now.
-
I picked up a hardmod v1.0 that was giving error 16. Through my fumbling with hotswapping and chimp I locked the drive to the “good” Xbox’s motherboard, so now I’m down to error 6. I got the drive unlocked and hooked up to my PC and did find an eeprom.bin on the drive, then used chimp to lock to that. (Saw a post where E:\ was the old location and Y:\ is the new one, and have done both.) Still gives error 6. Are there other names for the eeprom.bin file? I haven’t tried backup.bin and will give that a try. Wanted to post now because this is tiring. Only ways to read eeprom appear to be: 1) software running on that xbox; 2) eeprom reader. Others? Since I can’t even get the machine to a dashboard I can’t imagine that I could ftp or ssh into it, or whatever. Also, this new box has a chip in there but it isn’t working since I’m still having lock problems? Aladdin v1.1 is all I get from that. I saw a reference somewhere to Mini Aladdin, and that’s dang small. I have no experience with chips - do I need to do something like hold A+B or whatever to boot with that? Thank you.
-
Have a two original hard drive from a dead xbox but do not have a eeprom.bin or a hdd key backup, is there a solution to unlock? or a cloning hd from a working xbox?
-
I updated urldownloader last night, and I don’t know if it hung up on the install or what, but now I’m locked up. When I boot up, I get the same message saying it was updated, with an OK button. I click the button and it goes away but I’m locked up. Not sure what to do.
-
I hace a 300gb IDE hard drive that I used in a sodtmodded Xbox back in the day - only realized this evening that it is locked and that I no longer have the Xbox I made it for - is there anyway to unlock it - I have softmodded xboxes lying around - would they help unlock it? Thanks -
Hey, if I have an old Xbox hard drive from a softmod, that is locked, and I no longer have the Xbox, can I reuse it somehow still for anything? Like can I unlock it in windows and reformat?
Board Life Status
Board startup date: April 23, 2017 12:45:48