Search the Community
Showing results for tags 'find'.
Found 23 results
-
I went to the website and there's a PS1 system link on there under the "Download > Extras" but it seems the links are dead or something. The artwork can still be grabbed on the downloader dash at least. Any help would be great!
-
I was given Two OG XBOX PSUs but both have 2 missing components One PSU is Delta and belongs to OG Xbox 1.4 revision One PSU is Delta and belongs to OG Xbox 1.6 revision Fuse and varistor are missing in the PSUs, parts are not in the board, someone removed them. i think the owners connected them to 220v (here we have 220v , not 110v in the wall plug) and that caused the fuse to blow up, and varistor to blow up. Just like in the Wii power brick when connected to 220v So i spent some hours trying to figure out what the original components were for those PSUs, searching on forums and i was not able to find the complete info This is what i found online for each OG xbox model, in terms of original components it came with: OG Xbox 1.4 Power supply Varistor= Unknown? I was not able to find information online about this varistor. Fuse: 250v 3.15A (8.35x7.7mm) - OG Xbox 1.6 Power supply varistor: TVR 20241X Fuse : 250v 4A 20mm long - Maybe someone here on reddit knows more about these missing components so Here are my questions for OG Xbox 1.6 revision: The FUSE for OG xbox 1.6 revision, the PCB has printed "250v 4 Amps", and By looking at pictures on ebay i see they originally used a normal Glass Fuse 20mm long, but my question is: DOES IT NEED TO BE A FAST BLOW FUSE? OR SLOW BLOW FUSE? The VARISTOR for OG xbox 1.6 revision is TVR 20241X, but here that part is hard to find, can i use any of these as replacement? S20K150 or 20N241K or 20D241K ? (datasheets images are below) Here are my questions for OG Xbox 1.4 revision: The FUSE for the OG xbox 1.4 revision, the PCB has printed "250v 3.15 Amps", and by looking at pictures on ebay i see they originally used a circle encapsulated in plastic fuse, but again my question is: DOES IT NEED TO BE A FAST BLOW FUSE? OR SLOW BLOW FUSE? The VARISTOR for OG xbox 1.4 revision is UNKNOWN, I was not able to find online what type of varistor they used in that PSU, can i use the same varistor as in the 1.6 revision? here are images of the 1.4 fuse, along with what i was able to find available where i live for the 1.6 revision varistor, I hope someone can help me find the correct replacements -
Anyone know where to find the source code for the Xbox version of ScummVM? The last one I recall was version 1.4 or around there. -
Brand new sealed, bargain price of £10
-
I've a Xbox v1.2 - 1.5. I know you can TSOP it, but I like the options a modchip brings. So, I soldered the LPC pinheader, a wire from D0 to ground (screwhole) and a wire on the Aladdin XT PLUS2 XT 4032 chip from the BT to the other pad. Now when turning on the Xbox it FRAGs. The led on the modchip is on. When I remove the modchip (I didn`t remove the LPC header or the D0 to ground wire, only the modchip from the header) the FRAGing exists. Before I soldered the modchip, the Xbox was working fine. Some photo's from my soldering job. I also tested from the top of the board the D0 point and my meter beeps on all the screwplates, so that looks fine. Also the LPC pinheader looks good. So I'm a bit frustrated because of this issue. https://imgur.com/a/3IRniGb Above the pinheader you'll see some flux residu, I've taken care of that after the photo's. Is there a way to double check the connections from the pins and the back of the board to somewhere on the board?
-
I've been trying to find any artwork pack with covers and fanart for Xbox emulators themselves (not for games) and haven't had any luck. Everytime I find something that looks promising, the link is dead, Google drive access is restricted, etc. Does anyone have a collection like this or a link to one they'd be willing to share?
-
I just wanted to share what I think may be a beauty of a find. The Ebay listing had it going for parts only but I'm cheap and had a good feeling about it. As far as I can tell other than it starting up as soon as it's plugged in it is 100% functional. The listing said that it had trouble reading disks and spits them out randomly. I have yet to experience or replicate this behavior(I played and ripped two games from the DVD drive). I was expecting a broken stock machine but as soon as I cracked it open I saw a 160GB Seagate HD. Once I pulled out the drives I noticed that it had in fact been hard modded. It's date of manufacture is December of 2001 so it has to be a 1.0 right? Why would someone sell a gem like this for so little? I'm quite new to all of this but other than the slightly janky wiring and outdated version of Xecuter am I wrong to feel stoked about this one? Anything I should be wary of? I went into this expecting to at least have to recap the board but it seems that that may not be necessary.
-
Hello All, I have what seems to be a fully working Xecuter 2.6CE in a Revsion 1.6. XBMC4GAMERS and games are working, but I can't seem to find anywhere in settings where it shows the bios version or that it even recognizes the Xecuter 2.6CE mod chip. If I hold the black or clear button on controller during boot, it just loads normal to XBMC4GAMERS. Same if I hold the power and eject button at same time on startup. I do NOT get a "Xecuter Rox My Box" logo on startup screen, but only "Microsoft". Is the "Rox My Box" only a X3 thing? I get a "Evo X" in top left corner of the same green xbox loading screen. Just curious if my bios could be a better version or if I should just leave it all as is since it is working. If I select Bank1 or Bank2 on the switch on front of unit, both load fine and work, but seem identical. Where do I find what bios version I have? Thank you!
-
New to the forum and to the topic in general. The console was given to me by a friend, it comes loaded with some version of Unleash X. I have been trying to connect via FTP to load more games (DVD reader is broken). Sadly i don't know the credentials and not finding any way inside the dashboard to go to the config.xml file to get them. I read about FATXplorer so I guess that if I don't find any alternative from inside. I can always just plug in and look for the file on my PC but I will like to avoid buying all the adapters just for a one time use. Couple of pics from the menus that I can access (In Spanish lol) https://ibb.co/XWMmkfn https://ibb.co/C8GHv9J https://ibb.co/kJ0y2tF -
Hi everyone! I am looking for a place where I can download games and then ftp to my xbox. Can´t find a legit page
-
i just need the ones that hold the top cover on. -
I have a few skins on my Xbox which I think were installed by default (they're not in my E:/Skins folder). I'm trying to change the UXSplash.jpg for the GreenShapes skin, but I can't find the skin on my Xbox. Anybody know where I can find it? It's the skin like this:
-
Hey everyone! The OG Xbox was my console back in the day, I installed a modchip and astounded friends with XBMC at the time haha! I've had a few "project" Xbox's in the years since, but can never be bothered to finish anything and make it look pretty. Recently I've been itching to pick up my project from a few years ago: a nice crystal 1.4 with a RAM upgrade, some fun lighting and built in HDMI. The hardware's done I'm just too lazy to sort out the lighting setup I want. So it's great to find this place! My people! I guess I'll see you on the boards -
After years and years I'm getting back into modding. My previous experience is limited to a few evox softmods more than a decade ago. I'm so excited to see that there have been MANY additions since then.... any suggestions?
-
Anybody has the software called Flicker Fucker? I cannot find it anywhere on the Internet and I needed to test some games etc with it. I lookek in the Xbins, but I could not find it either, official website is down too. Thank you so much. -
Hi - I am trying to rebuild an xbox hard drive - I have the eeprom - a meant gave me an old Dell IDE drive - I know HDM v. 1.9 will work on it as I used it a few years ago. Does anyone know where I can get the C and E drive files for the rebuild? Thanks -
So I used HDM v1.9 and created a new xbox hard drive (40GB) that works. However, I don't see the extra space when I turn it on - it isn't softmodded yet. I'm just wondering if I should put the hard drive back in the PC and create a F Folder using HDM. Will the F folder naturally partition the rest of the available space on the drive or will the ROCKY 5 softmod make all the extra available space in the E drive? Any advice greatly appreciated.
-
HI all, XtecuterX73 from emuxtras here. The nestopiax dev. Can someone please help me find this unleashx skin that used to be on allxboxskins.com? Here is the only link i could find to it. Now i know there is no picture for it but this is the best i could do since i had to use wayback machine . It was a skin from Treya87 called Oblivion Nights. I would really appreciate any help finding this long lost gem. https://web.archive.org/web/20071207164550/http://www.allxboxskins.com/vote-comment/vc.php?UID=11084&app=unleashx&display=yes There are many skins from this site that are long gone i think unless some people still them somewhere.
-
hi guys long time lurker first time poster snagged this the other day seller wanted $100aud but ended up swaping a spare xbox one i had laying around so he could play fortnite lol kids these days i added it to my top og collection shelf stared and admired it for 2 days with a semi and got my x3 lcd fix lol. the problem is i have no idea what to do with it now and how to get it up to date -
Hey everyone I found this website and I figured I share it the name is arcade punks here is an link to there xbox files https://www.arcadepunks.com/original-xbox-file-archive/ merry x-mas og xbox.
-
-
Board Life Status
Board startup date: April 23, 2017 12:45:48